Isoscaling of the Fission Fragments with Langevin Equation

The Langevin equation is used to simulate the fission process of ^112Sn ^112Sn and ^116Sn ^116Sn. The mass distribution of the fission fragments are given by assuming the process of symmetric fission or asymmetric fission with the Gaussian probability sampling. The isoscaling behaviour has been observed from the analysis of fission fragments of both the reactions, and the isoscaling parameter α seems to be sensitive to the width of fission probability and the beam energy.     

农业专家另眼看"三农"

当前,随着中央一系列支农政策的出台,“三农”问题已成为人们关注的焦点。在近日召开的全国“三农”问题研讨会上,一些农业专家从全新角度揭示了当前“三农”存在的问题,提出了解决“三农”问题的战略选择。     

离心式风机导流器调节的经济性分析

全面分析和比较了G4－73型离心风机在较大负荷变化范围内分别采用轴向导流器调节和轴向导流器加双速电动机调节的运行经济性，对各种风机的节能具有重要的指导意义。     

CLL教学初探

一、引言“集体学习法”(Community LanguageLearning,简称CLL)是由美国芝加哥Loyola大学的心理学教授和心理咨询专家查尔斯.克伦(Charles A.Curran)于本世纪六十年代初创建的一种教学方法。它主要应用于成人外语教学,在教学过程中采用小组集体学习的形式。该教学法以心理疗法为其理论依据,认为学习者在学习外语过程中遇到的问题和人们在     

126Cs的高自旋态能级结构

利用融合蒸发反应¹¹⁶Cd(¹⁴N,4n)¹²⁶Cs布居了¹²⁶Cs的高自旋态.观测到了100多条新的γ跃迁和相应的能级,建立了双奇核¹²⁶Cs由9个转动带构成的能级纲图.尝试性地指定了大部分能级的自旋和宇称以及各转动带的Nilsson单粒子组态.极大地丰富了已有的实验结果.     

25MeV／u^6He十^9Be破裂反应的α碎片发射

测量了在25MeV／u^6He轰击^9Be靶的破裂反应产生的α碎片双微分截面及角分布，并在Ser—ber模型的框架下计算了在破裂反应中衍射破裂与擦去过程的贡献，并对结果进行了讨论．结果表明基于包含衍射破裂和擦去过程的Serber模型可以对^6He的直接反应进行较好地描述，擦去过程的贡献远大于衍射破裂的贡献．相对于^6Li而言，^6He较大的去2n微分截面源于它的弱束缚特性。     

国外电子政务建设现状与启示

1前言1.1电子政务的提出从世界范围来看,政府信息化建设最早可以追溯到20世纪50年代计算机在政府部门的使用。20世纪70、80年代,随着计算机的大量应用,很多国家开始推行行政事务的计算机化。20世纪90年代初期,美国克林顿政府为减少预算赤字、增加经济活力,首次提出了借助信息技术实现“电子政府”(e-Government)的概念。此后,世界上很多国家根据本国实际情况也纷纷制定了各自的政府信息化发展规划和目标。1.2电子政务的业务模型目前,对电子政务的业务模型也有不同的说法,较为常见的有以下4种:GtoG(GovernmenttoGovern-ment)政府部门间的电…     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.