电解氯化钠水溶液处理十二碳硫醇恶臭污水

采用电解氯化钠水溶液配合活性炭催化氧化处理十二碳硫酵恶臭污水．进行了初步的实验并取得了良好的效果．在电流3A条件下电解30g/L的NaCl水溶液，以活性炭作催化剂，反应温度为20℃，反应时间10—30s可以去除十二碳硫酵恶臭物质．     

考虑裂纹接触摩擦的逐点Lagrange乘子法

为了解决裂纹面可能发生的接触摩擦问题,精确求解裂纹尖端附近应力,提出了一种逐点Lagrange乘子法.将Lagrange乘子逐点转到局部坐标系下,采用Gauss-Seidel迭代法求解法向乘子和切向乘子,并在求解过程中对切向乘子的约束进行修正,待所有点的乘子求解完成后再将其变换到整体坐标系下迭代求解位移.与传统接触算法相比,该算法无需对总刚度阵求逆,降低了求解规模.利用该算法计算了压剪作用下中心裂纹板以及纯剪作用下中心界面裂纹板的应力强度因子,计算结果与已有文献结果吻合良好.随后考察了Comninou接触模型在远场纯剪作用下不同摩擦系数对位移场、接触区和裂尖附近应力场的影响,结果表明,接触对裂尖正应力影响较大,忽略裂纹面接触摩擦作用,应力强度因子可能被高估.     

电解法制备次磷酸镍的研究

详细研究了以镍和次磷酸钠为原料，采用电解法制备次磷酸镍的最佳条件和有关工艺。这种制备方法无废渣、废液产生，属清洁生产。     

Analysis of composite material interface crack face contact and friction effects using a new node-pairs contact algorithm

A new node-pairs contact algorithm is proposed to deal with a composite material or bi-material interface crack face contact and friction problem(e.g., resistant coating and thermal barrier coatings) subjected to complicated load conditions.To decrease the calculation scale and calculation errors, the local Lagrange multipliers are solved only on a pair of contact nodes using the Jacobi iteration method, and the constraint modification of the tangential multipliers are required. After the calculation of the present node-pairs Lagrange multiplier, it is turned to next contact node-pairs until all node-pairs have finished. Compared with an ordinary contact algorithm, the new local node-pairs contact algorithm is allowed a more precise element on the contact face without the stiffness matrix singularity. The stress intensity factors(SIFs) and the contact region of an infinite plate central crack are calculated and show good agreement with those in the literature. The contact zone near the crack tip as well as its influence on singularity of stress fields are studied. Furthermore, the frictional contacts are also considered and found to have a significant influence on the SIFs. The normalized mode-II stress intensity factors K?IIfor the friction coefficient decrease by 16% when f changes from 1 to 0.