A New Type of Terahertz Waveguides

A new type of THz waveguides, which employs a solid polyethylene rod as the core and polyethylene tubes in a periodic array of square lattice as the cladding, is proposed. Optical properties of this new THz waveguide, especially in dispersion, confinement loss and single mode property, are investigated in detail with the plane wave expansion method and the beam propagation method. Numerical results demonstrate that the new THz waveguide can reach not only low dispersion but also low confinement loss at single mode propagation. Therefore, the square lattice structure is a better candidate as THz waveguides than the triangular ones.     

Study on the 4×10 Gb/s,400 km dispersion compensation by chirped optical fiber grating

In this paper, the dispersion compensation for 4×10 Gb/s, 400 km G.652 fiber by chirped optical fiberBragg grating (FBG)is introduced.For the first time,we have measured and compensated the polarizationmode dispersion(PMD)of FBG, which in each channel is less than 1.1 ps.When the bit crror rate(BER)is 10~(-10)and the bit error is zero, the transmission power penalty of each channel is less than 2 dB, andthe best, result is negative which means that the receiver sensitivity is increased after transmission.     

物体轮廓动态测量的激光CCD扫描传感器的设计

对用光学单三角法测量物体一维曲面轮廓的光电传感器作了详细的理论研究，指出了影响传感器灵敏度、动态范围的主要因素。并在分析的基础上提出一种改进的测量方法。     

多点侧面泵浦双包层光纤激光器的对称夹层结构

 利用基于亚波长衍射光栅理论的介质-金属-介质的对称夹层结构,对掺杂的双包层光纤进行多点泵浦,根据严格的电磁场衍射理论和光栅方程,分析了多点泵浦时,这种耦合结构的泵浦光泄露的问题,证明了多点泵浦时泵浦光的泄露率仅为15.52%,而对信号光则不存在泄露。这种对称夹层结构可以用于多个大功率激光二极管阵列的多点侧面泵浦双包层掺杂光纤中,以制作各种大功率(数kW级)稀土光纤激光器,其最大耦合效率可以达到80%以上。     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

 利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差,以确保每段光纤中的最高工作温度是相同的。通过优化,7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ,8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃,8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差,实现了光纤中温度分布的均匀性,并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

铋镓共掺的高浓度掺铒石英基光纤中铒离子团簇率的实验研究

使用MCVD法结合溶液掺杂技术制作了铒铋镓共掺的石英基光纤.根据光纤吸收谱，得出其中铒离子浓度是5.24×10²⁵/m³.然后提出了一种新的利用透射率测定掺铒光纤的团簇率的实验方法，该方法相比于以前的方法更简单有效.利用该方法，测得了自制铒铋镓共掺光纤中团簇率.通过与前人的结果相比较，充分说明铋和镓的掺入大大提高了铒离子在石英基光纤中的溶解度，抑制了铒离子形成团簇.     

Dynamic PMD compensation in 40-Gb/s optical communication system

A 40-Gb/s optical time division multiplexing (OTDM) return-to-zero (RZ) transmission experiments including a dynamic polarization mode dispersion (PMD) compensation was reported. The dynamic PMD compensator is made up of two-stage four degrees of freedom (DOF). The first stage adopts polarization controller and fixed time-delayed line. The second stage is variable differential group delay (DGD) element. The PMD monitoring technique is based on degree of polarization (DOP) as error signal. A novel practical adaptive optimization algorithm was introduced in dynamic adaptive PMD compensation. The experimental results show that the performance of the PMD compensator is excellent for 40-Gb/s RZ transmission systems with the large DGD. With this compensator, a significant improvement of system performance can be achieved in the eye pattern of a received signal. The first-order compensating ability of the compensator is greater than 30 ps. The second-order compensating ability is greater than 200 ps2. The first     

实现20Gbit/s的OTDM孤子信号56km色散位移光纤的传输

在国内最先采用孤子的方式将8×2.5Gb/s的OTDM信号在色散位移光纤中传输了56.1km,对8×2.5Gb/s的OTDM进行解复用后进行了误码测量,系统功率代价为2.9dB.系统采用增益开关半导体激光器作光孤子源,高Q电滤波方式提取时钟,非线性光学环路镜解复用。孤子脉冲最大半宽度为20ps,传输光纤平均色散1.2ps/nm/km。     

大功率光纤放大器分段泵浦方式下的理论分析

利用数值算法计算了掺镱双包层光纤放大器分段泵浦方式下的稳态速率方程组,分析比较了双端泵浦和多段泵浦方式下的最佳光纤长度,最高温度和效率,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行了优化。结果表明,通过优化,大功率分段泵浦光纤放大器获得了较为平坦的温度分布,与双端泵浦相比,大大降低了最高工作温度,斜率效率略有下降。     

长波长双窗口零色散单模光纤的理论设计

长波长双窗口零色散低损耗光纤的设计必须同时满足1.3μm、1.55μm 色散和损耗的要求,并受到单模条件和工艺条件的诸多限制,我们首次使用适于任意形状四包层折射率剖面的软件计算光纤传输特性,在最内包层折射率下陷深度小于4.4‰的限制下,对这种光纤进行了多目标、多变量的结构优化设计;最后对实验结果和计算值进行了比较.