排序方式: 共有46条查询结果,搜索用时 16 毫秒
1.
采用氨气还原法制备了NaY分子筛负载的MoCo/Y、MoNi/Y双组氮化物催化剂,用XRD和EXAFS方法征了样品的结构,并测定了其在CH4+CO2重整反应中的活性,在氧化态时,MoCo/Y样品中主要存在CoMoO4和Co3O4两种物相,Mo的配位状态接近于CoMoO4,而Co的配位状态更接近于Co3O4,MoNi/Y样品中主要有NiMoO4和NiO两种物相,Mo的配位状态接近于MiMoO4,而Ni的配位状态可能是NiMoO4和NiO两种化合物中Ni配位状态的平均效果,Ni-Mo之间的朴素作用似乎比Co-Mo相对较强,在氮化态时,两种样品中Mo的配位状态较为相似,但即不同于MoO3,也不同于单组分γ-Mo2N.Co和Ni的配位状态都不同于各在氧化态下的状态,且都在相同的位置出现一个新强峰,这似乎表明MoCo和MoNi生成了结构相似的氮化物,在CH4+CO2重整反应中,氮化态MoCO/Y和MoNi/Y的活性大大超过非负载单组分γ-Mo2N催化剂,其中MoNi/Y的活性相对更好一些,且活性随Ni含量增加而提高。 相似文献
2.
数控抛光技术中抛光盘的去除函数 总被引:14,自引:3,他引:14
抛光盘去除函数的确定是数控抛光技术的应用基础,以Preston 方程为基础,应用运动学原理推导了抛光盘在行星运动及平转动两种运动方式下的材料去除函数,并通过计算机模拟出相应的工作特性曲线。结果表明,两种运动方式下工作特性曲线均在不同程度上趋近于高斯曲线。因而行星运动及平转动都可作为抛光盘的运动方式应用在CCOP技术中,使加工中的面形误差得到收敛。 相似文献
3.
Pace S Seantier B Belamie E Lautrédou N Sailor MJ Milhiet PE Cunin F 《Langmuir : the ACS journal of surfaces and colloids》2012,28(17):6960-6969
Classical methods for characterizing supported artificial phospholipid bilayers include imaging techniques such as atomic force microscopy and fluorescence microscopy. The use in the past decade of surface-sensitive methods such as surface plasmon resonance and ellipsometry, and acoustic sensors such as the quartz crystal microbalance, coupled to the imaging methods, have expanded our understanding of the formation mechanisms of phospholipid bilayers. In the present work, reflective interferometric Fourier transform spectrocopy (RIFTS) is employed to monitor the formation of a planar phospholipid bilayer on an oxidized mesoporous Si (pSiO(2)) thin film. The pSiO(2) substrates are prepared as thin films (3 μm thick) with pore dimensions of a few nanometers in diameter by the electrochemical etching of crystalline silicon, and they are passivated with a thin thermal oxide layer. A thin film of mica is used as a control. Interferometric optical measurements are used to quantify the behavior of the phospholipids at the internal (pores) and external surfaces of the substrates. The optical measurements indicate that vesicles initially adsorb to the pSiO(2) surface as a monolayer, followed by vesicle fusion and conversion to a surface-adsorbed lipid bilayer. The timescale of the process is consistent with prior measurements of vesicle fusion onto mica surfaces. Reflectance spectra calculated using a simple double-layer Fabry-Perot interference model verify the experimental results. The method provides a simple, real-time, nondestructive approach to characterizing the growth and evolution of lipid vesicle layers on the surface of an optical thin film. 相似文献
4.
波长转换技术是 DWDM全光网络中一项重要的基础技术。介绍了波长转换技术的基本原理 ,并对现有主要的几种波长转换技术进行比较 ,最后指出基于四波混频技术的波长转换技术是未来的研究方向 相似文献
5.
利用透镜聚焦,抛物面喷管约束,结合复摆和光指针测量系统研究了单脉冲能量对吸气式激光推进冲量耦合系数的影响,实验中通过调节激光器工作电压和硅片衰减实现了脉冲能量5~70 J范围的有效拓展;进一步采用纳秒分幅高速相机拍摄了24 J能量下的流场纹影照片。结果表明:在4~9 J低能量和32~70 J较高能量区间,冲量耦合系数均较稳定;9~32 J能量下冲量耦合系数呈线性增长趋势,变化范围(6.5~21.0)×10-5 N·s·J-1;纹影照片显示流场演化经历了激光支持爆轰波、爆燃波和激波3个阶段,耦合系数的变化规律源于不同单脉冲能量对应不同的能量沉积效率。 相似文献
6.
利用修改的一维非定态程序,基于美国杰弗逊实验室(JLab)Demo自由电子激光装置的参数,对高功率自由电子激光振荡器稳定波长的反馈系统进行了数值模拟。电子微脉冲为高斯型分布,每个纵向网格中取16个模拟宏电子,不考虑电子束的能散度。结果表明:当无反馈时,腔内光功率和波长都可以在一定范围内稳定;加入反馈后,由于电子束能量的变化所引起的等效失谐对整个系统有着重要的影响,甚至可能导致电子和光场失去相互作用,从而使得装置不能工作。提出应该在光场达到饱和以后再启动稳定波长反馈系统。模拟结果证明,该实施方案是合理有效的,可以避免其对FEL运行的严重影响。 相似文献
7.
8.
9.
10.
IntroductionZeoliteZSM-35,becauseofitssatisfactorycarelyticpropertiesandcompafativelyhighSiOZ/A12O3ratio,hasattractedconsiderableeffortsleadingtofindtheappropriatesyntheticconditionsforopticalcharactCristicsofproducts.Inadditiontoconventionalhydrothermals… 相似文献