改革物理实验课教学,提高实验课的教学质量

根据多年的物理实验教学经验，阐明了物理实验教学改革应重视的问题，并提出了几点改进措施。     

牛顿第二定律实验中的误差分析

本文是通过对加速度的实验值和理论值进行比较和分析，给出误差的合理范围。     

Surface functionalization of ordered mesoporous carbons--a comparative study

Hexagonally structured mesoporous carbons C15 and CMK-5 and cubically structured carbon C48 were synthesized using ordered silica SBA-15 and MCM-48 as templates and carbon precursors of different structures. The surfaces of these ordered carbons were chemically functionalized by employing an approach, in which the selected diazonium compounds were in situ generated and reacted with the carbon frameworks of the mesoporous carbons. The aromatic organic molecules containing chlorine, ester, and alkyl groups were covalently attached to the surface of these ordered mesoporous carbons. The presence of functional groups on the modified carbons was confirmed with Fourier transform infrared spectroscopy, thermogravimetric analysis, and nitrogen adsorption. The BET-specific surface area and the pore width of ordered carbons were significantly reduced, whereas the primary structure of these ordered carbons and their unit cells were intact. Basically, the density of grafted functional groups is related to the specific surface area of the sample, particularly the surface area of mesopores. The surface functionalization reaction takes place only on the external surface of carbon C15, while it occurs on both of the internal and external surface of CMK-5 carbon with the nanopipe structure. The presence of the micropores in CMK-5 carbon should be responsible for its lower grafting density because the small micropores are inaccessible in the reaction. It was also proposed that the preferred adsorption/reaction in C48 may be related to the observed unsymmetrical degradation of the XRD patterns for the functionalized C48 samples. The chemical modification process considerably reduced the primary mesopores in these ordered carbons by approximately 1-1.5 nm, affording carbons with micropores in the cases of C15 and C48, and mixed micropores and small mesopores in the case of CMK-5. A grafting density of approximately 0.9-1.5 micromol/m(2) was achieved under current research.     

Synthesis and Characterization of a New Layered Aluminophosphate [Al3P4O16][(CH3)2NHCH2CH2NH(CH3)2][H3O]

A new layered aluminophosphate, denoted AlPO-CJ12, has been synthesized in the system Al(OPrⁱ)₃-H₃PO₄-tetramethylethylenediamine-triethyleneglycol and its structure solved by single-crystal X-ray diffraction analysis. It is further characterized by X-ray powder diffraction, ICP, TG, DTA, and elemental analyses. The compound has an empirical formula of [Al₃P₄O₁₆][(CH₃)₂NHCH₂CH₂NH(CH₃)₂][H₃O], and crystallizes in the triclinic space group P-1 (No. 2) with a=8.9907(6) Å b=9.8359(6) Å, c=14.5566(8) Å, α=75.872(3)°, β=88.616(3)°, γ=63.404(3)°, Z=2, R₁=0.0451, and wR₂=0.1094. The alternation of tetrahedral AlO₄ and PO₃ (=O) units forms a sheet structure with a 4×6×8 network. The inorganic layers stacked in an AAAA sequence are held together by the protonated organic amine and water molecules. The co-templating role of the water molecules is studied by the calculation of the nonbonding host-guest interaction energies through a computational simulation.     

硫代多联吡啶铂(Ⅱ)配合物的合成、性质及在光催化制氢中的应用

合成了2个新配体4-(4-硫代乙酸)甲苯基-6-苯基-2,2’-联吡啶HC^N^N(PhCH2SCOCH3)(L3)和6-(4-硫代乙酸)甲苯基-2,2’-联吡啶HC^N^N(CH2SCOCH3)(L5)及其发光的铂(Ⅱ)配合物ClPtC^N^N(PhCH2SCOCH3)(C3)和ClPtC^N^N(CH2SCOCH3)(C5).通过1H NMR谱和质谱对它们的结构进行了表征,采用X射线单晶衍射分析确定了C3的晶体结构.利用紫外-可见吸收光谱、发射光谱及激发态寿命测定研究了它们的光物理性质和电化学性质,以及配合物作为光敏剂在光催化制氢中的应用.通过系列配合物产氢效率的比较,揭示了它们的产氢效率和激发态寿命的关系.     

一体化电极电催化二氧化碳还原研究进展

电催化二氧化碳还原反应(E-CO₂RR)可在温和条件下将CO₂转化成高附加值燃料或化学品,近年来受到广泛关注,其在实际反应中涉及到气体扩散和多电子转移等复杂过程,构筑高效、稳定的催化电极是其发展的核心之一。然而,传统涂敷电极制备时,需要将催化剂与粘结剂混合涂覆于集流体表面,此过程会造成活性位点包埋和传质过程受限,致使催化剂活性位利用率下降,同时在反应过程中电极表面容易粉化,造成稳定性下降,难以重复利用。因此,如何调控电极反应界面,提升催化剂活性位的利用率仍面临挑战。将催化剂原位生长于集流体上得到的一体化电极可直接应用于电催化反应,不仅有利于提升活性位利用率以及电荷传输能力,还能有效调控三相界面处的微观反应环境(如pH、反应物及反应中间体的浓度等),从而实现电催化性能强化。本文综述了一体化电极用于E-CO₂RR的最新进展,分析了结构和表界面调控对E-CO₂RR性能的影响规律,并对该领域仍然存在的挑战和未来一体化E-CO₂RR电极的发展进行了评述与展望。     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

A Layered Cationic Aluminum Oxyhydroxide as a Highly Efficient and Selective Trap for Heavy Metal Oxyanions

Cationic framework materials, especially pure inorganic cationic frameworks that can efficiently and selectively capture harmful heavy metal oxyanions from aqueous solution are highly desired yet scarcely reported. Herein, we report the discovery of a 2D cationic aluminum oxyhydroxide, JU-111, which sets a new benchmark for heavy metal oxyanion sorbents, especially for Cr^VI. Its structure was solved based on 3D electron diffraction tomography data. JU-111 shows fast sorption kinetics (ca. 20 min), high capture capacity (105.4 mg g⁻¹), and broad working pH range (3–10) toward Cr^VI oxyanions. Unlike layered double hydroxides (LDHs), which are poorly selective in the presence of CO₃²⁻, JU-111 retains excellent selectivity for Cr^VI even under a large excess of CO₃²⁻. These superior features coupled with the ultra-low cost and environmentally benign nature make JU-111 a promising candidate for toxic metal oxyanion remediation as well as other potential applications.     

开放骨架磷酸铝合成中碳链长度对乙二胺结构导向效应的影响

以乙二胺(EDA)和1,3-丙二胺(1,3-DAP)为结构导向剂,在180 ℃加热摩尔比n(Al₂O₃):n(P₂O₅):n(R):n(H₂O)=1:1:1:277(R=EDA,1,3-DAP)的混合物,分别得到了高结晶度的三维阴离子开放骨架磷酸铝AlPO₄-12和UiO-26。 利用X射线粉末衍射分析、元素分析和液相酸碱度测量等表征手段,研究了两个合成体系的晶化过程以及晶化过程中液相的Al、P浓度和pH值随时间的演化。 用Materials Studio中的“原子体积和表面”模块和Dmol3模块计算了双质子化乙二胺和1,3-丙二胺的体积以及Hirshfeld电荷。 结果表明,双质子化EDA和1,3-DAP中N原子上的Hirshfeld电荷分别为0.073 e和0.064 e,按Hirshfeld电荷计算的电荷密度分别为1.8573和1.3400 e/nm³,按形式电荷计算的电荷密度分别为25.44和20.94 e/nm³,而AlPO₄-12和UiO-26的骨架电荷密度分别为-6.1和-4.6 e/nm³。 结果表明,与氨基中N原子相连碳链长度的改变会影响其上的电荷量以及电荷密度,从而改变原有机胺的结构导向效应,导致晶化产物从AlPO₄-12变成了具有较小电荷密度的UiO-26。     

PLC在泵站控制系统中的应用

介绍了美国Ａｌｌｅｎ－Ｂｒａｄｌｅｙ公司的ＳＬＣ５００系列可编程控制器（ＰＬＣ）在泵站控制系统中的应用，给出了此泵站控制系统的构成、系统功能和程度流程图。