Voltage transfer function synthesis using current conveyors

A synthesis procedure for generating current conveyor active filters is presented, and a novel network which realises the general 2nd-order voltage transfer function is given.<>     

Thermodynamic perturbation theory for fused sphere hard chain fluids using nonadditive interactions

A model is developed for the equation of state of fused chains based on Wertheim thermodynamic perturbation theory and nonadditive size interactions. The model also assumes that the structure (represented by the radial distribution function) of the fused chain fluid is the same as that of the touching hard sphere chain fluid. The model is completely based on spherical additive and nonadditive size interactions. The model has the advantage of offering good agreement with simulation data while at the same time being independent of fitted parameters. The model is most accurate for short chains, small values of Delta (slightly fused spheres) and at intermediate (liquidlike) densities.     

Internal plasticization of poly(vinyl) chloride using glutamic acid as a branched linker to incorporate four plasticizers per anchor point

Internal plasticization of polyvinyl chloride (PVC) using thermal azide‐alkyne Huisgen dipolar cycloaddition between azidized PVC and electron‐poor acetylenediamides incorporating a branched glutamic acid linker resulted in incorporation of four plasticizing moieties per attachment point on the polymer chain. A systematic study incorporating either alkyl or polyethylene glycol esters provided materials with varying degrees of plasticization, with depressed T_g values ranging from ?1 °C to 62 °C. Three interesting trends were observed. First, T_g values of PVC bearing various internal plasticizers were shown to decrease with increasing chain length of the plasticizing ester. Second, branched internal plasticizers bearing triethylene glycol chains had lower T_g values compared to those with similar length long‐chain alkyl groups. Finally, thermogravimetric analysis of these internally plasticized PVC samples revealed that these branched internal plasticizers bearing alkyl chains are more thermally stable than similarity branched plasticizers bearing triethylene glycol units. These internal tetra‐plasticizers were synthesized and attached to PVC‐azide in three simple synthetic steps. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1821–1835     

Optical,Electrical, and Magnetic Studies of Organic Solar Cells Based on Low Bandgap Copolymer with Spin ½ Radical Additives

The charge photogeneration and recombination processes in organic photovoltaic solar cells based on blend of the low bandgap copolymer, PTB7 (fluorinated poly‐thienothiophene‐benzodithiophene) with C60‐PCBM using optical, electrical, and magnetic measurements in thin films and devices is studied. A variety of steady state optical and magneto‐optical techniques were employed, such as photoinduced absorption (PA), magneto‐PA, doping‐induced absorption, and PA‐detected magnetic resonance (PADMR); as well as picosecond time‐resolved PA. The charge polarons and triplet exciton dynamics in films of pristine PTB7, PTB7/fullerene donor–acceptor (D–A) blend is followed. It is found that a major loss mechanism that limits the power conversion efficiency (PCE) of PTB7‐based solar cell devices is the “back reaction” that leads to triplet exciton formation in the polymer donor from the photogenerated charge‐transfer excitons at the D–A interfaces. A method of suppressing this “back reaction” by adding spin½ radicals Galvinoxyl to the D–A blend is presented; this enhances the cell PCE by ≈30%. The same method is not effective for cells based on PTB7/C70‐PCBM blend, where high PCE is reached even without Galvinoxyl radical additives.     

Towards understanding the critical heat flux for industrial applications

Understanding CHF is of an upmost importance in many industries, especially in the design and operation of boilers, nuclear power plants, cryogenic systems, etc. Due to safety issues related to the nuclear power plants, and the adaptation of CHF as the limiting criterion of power generation, it is important to understand the mechanisms of CHF relevant to nuclear systems operation. Moreover, CHF is expected to occur during transients than steady-state conditions. Therefore, knowledge of transient CHF is of great importance for the safety evaluation of nuclear reactors under transient condition. In this paper, the existing CHF experimental and modeling studies are discussed in order to understand the phenomena leading to CHF. Also, the effect of transient conditions on CHF for nuclear fuels has been evaluated.     

Noise sensitivity of watershed segmentation for different connectivity: experimental study

Low-budget image acquisition devices can produce noisy images, degrading segmentation quality. The sensitivity of two basic neighbourhood definitions to noise in watershed segmentation is compared. The two neighbourhood definitions are the 4- and 8-connected neighbourhoods. A similarity of segmentation to the noiseless original is observed, while increasing the energy of random Gaussian noise added to the image. It is concluded that the 8-connected neighbourhood is more robust.     

Influence of branch content on the microstructure of blends of linear and octene-branched polyethylene: a MD simulation study

Microstructure of linear low-density polyethylene (LLDPE) with linear high-density polyethylene (HDPE) is investigated by molecular dynamics (MD) simulation. The branch content of LLDPE was varied from 10 to 60 branches/1000 C. An equimolar mixture of each of the two polymers is simulated in the NVT ensemble at 500 K and at average experimental densities of the two polymer melts. Initially, chains of LLDPE and HDPE were completely mixed and evolution of conformations with time was monitored. The blends were found to microphase separate when the branch content of LLDPE exceeded 30 branches/1000 C. At 40 branches/1000 C, the two polymers displayed partial microphase separation and complete microphase separation was observed at 60 branches/1000 C. Substantial short-range order and mismatch of molecular conformations is observed in the microphase-separated systems.     

Nitrile Metabolizing Enzymes in Biocatalysis and Biotransformation

Nitrile metabolizing enzymes, i.e., aldoxime dehydratase, hydroxynitrile lyase, nitrilase, nitrile hydratase, and amidase, are the key catalysts in carbon nitrogen triple bond anabolism and catabolism. Over the past several years, these enzymes have drawn considerable attention as prominent biocatalysts in academia and industries because of their wide applications. Research on various aspects of these biocatalysts, i.e., sources, screening, function, purification, molecular cloning, structure, and mechanisms, has been conducted, and bioprocesses at various scales have been designed for the synthesis of myriads of useful compounds. This review is focused on the potential of nitrile metabolizing enzymes in the production of commercially important fine chemicals such as nitriles, carboxylic acids, and amides. A number of opportunities and challenges of nitrile metabolizing enzymes in bioprocess development for the production of bulk and fine chemicals are discussed.     

Parasitic extraction: current state of the art and future trends

With the increase in circuit performance (higher speeds) and density (smaller feature size) in deep submicrometer (DSM) designs, interconnect parasitic effects are increasingly becoming more important. This paper first surveys the state of the art in parasitic extraction for resistance, capacitance, and inductance. The paper then covers other related issues such as interconnect modeling, model order reduction, delay calculation, and signal integrity issues such as crosstalk. Some future trends on parasitic extraction, model reduction and interconnect modeling are discussed and a fairly complete list of references is given     

Modelling the CPI using a lognormal diffusion process and implications on forecasting inflation

The Maximum Likelihood estimator is used within a lognormaldiffusion process and closed form analytical solutions are obtained.The monthly CPI forecasts are estimated for the period between1970 and 2002. The quarterly estimates of inflation rates areobtained from monthly forecasts rather than from quarterly data.This has significantly improved the estimates of inflation rates.The model also produced a superior fit as compared to randomwalk and GARCH(p,q)-M models. The adopted approach is foundto be simple, economical and generally suitable for modellingstochastic processes that reflect aggregation over time stemmingfrom many factors, and in which the transition path betweenconsecutive states is relatively smooth.