Organic Semiconducting Luminophores for Near-Infrared Afterglow,Chemiluminescence, and Bioluminescence Imaging

Optical imaging has played a pivotal role in deciphering in vivo bioinformatics but is limited by shallow penetration depth and poor imaging performance owing to interfering tissue autofluorescence induced by concurrent photoexcitation. The emergence of near-infrared (NIR) self-luminescence imaging independent of real-time irradiation has timely addressed these problems. There are two main kinds of self-luminescent agents, namely inorganic and organic luminophores. Inorganic luminophores usually suffer from long-term biotoxicity concerns resulting from potential heavy-metal ions leakage and nonbiodegradability, which hinders their further translational application. In contrast, organic luminophores, especially organic semiconducting luminophores (OSLs) with good biodegradable potential, tunable design, and outstanding optical properties, are preferred in biological applications. This review summarizes the recent progress of OSLs used in NIR afterglow, chemiluminescence, and bioluminescence imaging. Molecular manipulation and nanoengineering approaches of OSLs are discussed, with emphasis on strategies that can extend the emission wavelength from visible to NIR range and amplify luminescence signals. This review concludes with a discussion of current challenges and possible solutions of OSLs in the self-luminescence field.     

A Biosilification Fusion Protein for a ‘Self‐immobilising’ Sarcosine Oxidase Amperometric Enzyme Biosensor

Monomeric sarcosine oxidase (mSOx) fusion with the silaffin peptide, R5, designed previously for easy protein production in low resource areas, was used in a biosilification process to form an enzyme layer electrode biosensor. mSOx is a low activity enzyme (10–20 U/mg) requiring high amounts of enzyme to obtain an amperometric biosensor signal, in the clinically useful range <1 mM sarcosine, especially since the K_m is >10 mM. An amperometric biosensor model was fitted to experimental data to investigate dynamic range. mSOx constructs were designed with 6H (6×histidine) and R5 (silaffin) peptide tags and compared with native mSOx. Glutaraldehyde (GA) cross‐linked proteins retained ～5 % activity for mSOx and mSOx‐6H and only 0.5 % for mSOx‐R5. In contrast R5 catalysed biosilification on (3‐mercaptopropyl) trimethoxysilane (MPTMS) and tetramethyl orthosilicate (TMOS) particles created a ‘self‐immobilisation’ matrix retaining 40 % and 76 % activity respectively. The TMOS matrix produced a thick layer (>500 μm) on a glassy carbon electrode with a mediated current due to sarcosine in the clinical range for sarcosinemia (0–1 mM). The mSOx‐R5 fusion protein was also used to catalyse biosilification in the presence of creatinase and creatininase, entrapping all three enzymes. A mediated GC enzyme linked current was obtained with dynamic range available for creatinine determination of 0.1–2 mM for an enzyme layer ～800 nm.     

激光熔覆Ni基SiC合金涂层组织与性能的研究

利用5kWCO2连续波激光器在16Mn钢基材表面对含20%(体积比)SiC陶瓷粉末的镍基自熔性合金粉末进行激光熔覆得到Ni基SiC合金涂层(NiSiC)。研究了合金涂层的组织形貌及相结构,并用单纯的镍基合金涂层(Ni60)进行了显微硬度及滑动磨损性能的对比试验。结果表明,NiSiC合金涂层由γ枝晶及其间的共晶组织组成,主要组成相为γ-Ni,γ-(Ni,Fe)固溶体和(Cr,Fe)7C3,Cr23C6及(Cr,Si)3Ni3Si等化合物。添加SiC的镍基合金涂层NiSiC比单纯的镍基合金涂层Ni60具有较高的硬度和耐磨性。     

漫谈金属探测器

提起金属探测器（Metal Detector），人们就会联想到探雷器，工兵用它来探测掩埋的地雷．金属探测器是一种专门用来探测金属的仪器，除了用于探测有金属外壳或金属部件的地雷之外，还可以用来探测隐蔽在墙壁内的电线、埋在地下的水管和电缆，甚至能够地下探宝，发现埋藏在地下的金属物体．目前还广泛应用于各种大型会议中心、会展场馆、体育场馆、公检法、监狱系统及娱乐场所的安全检查和工厂企业的防偷窃检查，甚至用于对高考禁带物品的检查．本文就来谈谈金属探测器的发展历史和工作原弹．     

Simplified analytic solutions and a novel fast algorithm for Yb-doped double-clad fiber lasers

In this paper, continuous wave Yb³⁺-doped double-clad fiber lasers (DCFLs) with linear-cavity are investigated theoretically and numerically using the rate equations. Under the steady state conditions, the simplified analytic solutions of Yb³⁺-doped DCFLs under considering the scattering loss are deduced in the strongly pump condition. Compared with the known analytic solutions in published literatures, our analytic solutions are more accurate, especially, at higher reflectivity of output mirror. In addition, a fast and stable algorithm based on the Newton-Raphson method is proposed to simulate numerically Yb³⁺-doped DCFLs. The results by simplified analytic solutions are in good agreement with those by the numerical simulation. Moreover, we have performed the optimization of an Yb³⁺-doped DCFL using the simplified analytic solutions and the numerical simulations, respectively.     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

用稳态反饱和吸收法测量C_（60）的激发态吸收截面

用准连续激光实现了Ｃ６０的稳态反饱和吸收，通过实验和理论计算的拟合，确定了Ｃ６０的三重第一激发态吸收截面。     

KF-Al2O3催化合成2-甲基-1-苄基苯并咪唑

苯并咪唑类杂环化合物具有杀菌、消炎、抗癌、抗氧化的活性,广泛用于食品的防虫和防腐,用于动、植物病毒的防治,人体疾病和肿瘤的防治[1-3],本文用KF Al2O3作催化剂,用DMF为溶剂,利用2 甲基苯并咪唑与苄基溴反应合成2 甲基 1 苄基苯并咪唑的新型方法,考察了诸因素对产率的影响,找出了最佳的反应条件。合成路线如下:1　实验部分1 1　仪器与试剂Brurer AM 500超导核磁共振波谱仪(溶剂CDCl3);CarloErbal1106型元素分析仪,NicoletIm pact410型红外光谱仪,KBr压片,HP1100型和Finnigan FTMS 2000型质谱仪(以上均由华东理工大学分析…