Design and practical implementation of multifrequency RF front ends using direct RF sampling

The use of direct RF sampling has been explored as a means of designing multifrequency RF front ends. Such front ends will be useful to multifrequency RF applications such as global navigation satellite system receivers that use global positioning system (GPS) L1, L2, and L5 signals and Galileo signals. The design of a practical multifrequency direct RF sampling front end is dependent on having an analog-to-digital converter whose input bandwidth accommodates the highest carrier frequency and whose maximum sampling frequency is more than twice the cumulative bandwidth about the multiple carrier signals. The principle of direct RF sampling is used to alias all frequency bands of interest onto portions of the Nyquist bandwidth that do not overlap. This paper presents a new algorithm that finds the minimum sampling frequency that avoids overlap. This design approach requires a multifrequency bandpass filter for the frequency bands of interest. A prototype front end has been designed, built, and tested. It receives a GPS coarse/acquisition code at the L1 frequency and GPS antispoofing precision code at both L1 and L2. Dual-frequency signals with received carrier-to-noise ratios in excess of 52 dB-Hz have been acquired and tracked using this system.     

Directed flow of lambda hyperons in (2-6 )A GeV Au+Au collisions

Directed flow measurements for Lambda hyperons are presented and compared to those for protons produced in the same Au+Au collisions (2A, 4A, and 6A GeV; b<5-6 fm). The measurements indicate that Lambda hyperons flow consistently in the same direction but with smaller magnitudes. A strong positive flow [for Lambdas] has been predicted in calculations which include the influence of the Lambda-nucleon potential. The experimental flow ratio Lambda/p is in qualitative agreement with expectations (approximately 2/3) from the quark counting rule at 2A GeV but is found to decrease with increasing beam energy.     

Sideward flow in Au+Au collisions between 2A and 8A GeV

Using the large acceptance Time Projection Chamber of experiment E895 at Brookhaven, measurements of collective sideward flow in Au+Au collisions at beam energies of 2A, 4A, 6A, and 8A GeV are presented in the form of in-plane transverse momentum and the first Fourier coefficient of azimuthal anisotropy v(1). These measurements indicate a smooth variation of sideward flow as a function of beam energy. The data are compared with four nuclear transport models which have an orientation towards this energy range. All four exhibit some qualitative trends similar to those found in the data, although none show a consistent pattern of agreement within experimental uncertainties.     

Bit-wise parallel algorithms for efficient software correlation applied to a GPS software receiver

A set of efficient algorithms for processing code-division multiple-access spread spectrum signals has been developed. They make use of bit-wise parallelism to process 32 samples simultaneously. These algorithms have been implemented in a real-time global positioning system software receiver. The receiver consists of a radio-frequency front end, a system of shift registers, a digital data acquisition card, and software that runs on a 1.73-GHz PC. The PC performs base-band mixing and pseudorandom noise code correlations in a manner that directly simulates a hardware digital correlator.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Study of magnetoresistance and conductance of bicrystal grain boundary in La0.67Ba0.33MnO3 thin film

La_0.67Ba_0.33MnO₃ (LBMO) thin film is deposited on a 36.7°C SrTiO₃ bicrystal substrate using laser ablation technique. A microbridge is created across bicrystal grain boundary and its characteristics are compared with a microbridge on the LBMO film having no grain boundary. Presence of grain boundary exhibits substantial magnetoresistance ratio (MRR) in the low field and low temperature region. Bicrystal grain boundary contribution in MRR disappears at temperature T>175 K. At low temperature, I-V characteristic of the microbridge across bicrystal grain boundary is nonlinear. Analysis of temperature dependence of dynamic conductance-voltage characteristics of the bicrystal grain boundary indicates that at low temperatures (T<175 K) carrier transport across the grain boundary in LBMO film is dominated by inelastic tunneling via pairs of manganese atoms and tunneling through disordered oxides. At higher temperatures (T>175 K), magnetic scattering process is dominating. Decrease of bicrystal grain boundary contribution in magnetoresistance with the increase in temperature is due to enhanced spin-flip scattering process.     

Microprocessor Implementation of an FFT for Ionospheric VLF Observations

A fast fourier transform algorithm is implemented on a CMOS microprocessor for application to very low-frequency electric fields (<10 kHz) sensed on high-altitude scientific balloons. Two FFT's are calculated simultaneously by associating them with conjugate symmetric and conjugate antisymmetric results. One goal of the system was to detect spectral signatures associated with fast time variations present in natural signals such as whistlers and chorus. Although a full evaluation of the system was not possible for operational reasons, a measure of the system's success has been defined and evaluated.     

Molar extinction coefficients of some carbohydrates in aqueous solutions

Molar extinction coefficients of some carbohydrates viz. l-arabinose (C₅H₁₀O₅), d-glucose (C₆H₁₂O₆), d-mannose (C₆H₁₂O₆), d-galactose (C₆H₁₂O₆), d(-) fructose (C₆H₁₂O₆) and maltose (C₁₂H₂₄O₁₂) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer-Lambert law is obeyed very well.