Current measurement method based on magneto-optic rotation effect

Aiming at the approximate measurement of magnetic rotation angle in optical current sensor based on light intensity detection mode, this paper proposes a current measurement method based on triangular constant transformation to reconstruct magnetic rotation angle, so as to avoid the large current measurement error caused by the approximate measurement of the magnetic rotation angle. By extracting the direct current (DC) component and the alternating current (AC) component of the light intensity signal detected by the photoelectric detector (PD), the sine signal containing the magnetic rotation angle is directly obtained by dividing the two components, and then the triangular identity transformation method is used to linearly demodulate the magnetic rotation angle and reconstruct the current waveform. The experimental results show that the relative error of current measurement does not exceed 1.40% in the current range of 0.05—0.50 A, which is less than the approximate linear measurement (ALM) method, and the magnetic rotation angle and the current have a good linear relationship.     

THE ESTABLISHMENT OF TWO SETS OF ALIEN ADDITION LINES OF WHEATWHEATGRASS

The procedure and method for the transfer of two sets of 14 pairs of wheatgrass (Agropyron interrnedium) chromosomes into common wheat to establish two sets of wheat-wheatgrass alien addition lines are reported. Meanwhile, observations and analyses have been made on the phenotypicaI characters of all the 14 alien addition lines established. It is determined that wheatgrass chromosomes in some of the established addition lines carry the rustresistant genes. In addition, questions concerning the location and distribution of certain agriculturally important genes of wheatgrass chromosomes have been discussed.     

由不同镍盐前体制备高分散Ni/SBA-15催化剂：活化氛围的影响

以硝酸镍和乙酸镍为镍前体,用浸渍法分别在空气和氢气氛围活化制得系列Ni/SBA-15催化剂,通过XRD、H₂-TPD、N₂物理吸附和在线质谱等物理化学手段对催化剂进行了表征,并结合微型高压反应釜萘加氢反应,评价了催化剂的加氢性能。结果表明,氢气氛围活化对硝酸镍为镍前体所制Ni/SBA-15催化剂的镍分散度和活性有显著促进作用,而空气氛围活化对乙酸镍为镍前体所制催化剂有明显促进作用。根据催化剂前体在不同氛围活化时的热分解产物,提出了活化氛围对不同镍前体制得Ni/SBA-15催化剂所产生的作用机理。     

神府煤与稻杆共热溶研究

研究了神府煤与稻杆在1-甲基萘溶剂中不同温度下的共热溶行为。相对神府煤,稻杆单独热溶时具有更高的热溶率,表明其具有较好的热溶活性。但稻杆的热溶过程中产生大量的挥发性气体,导致其热溶率和热溶物产率之间的较大差异。神府煤单独热溶时,其热溶率与热溶物产率之间的差异相对较小。神府煤与稻杆的共热溶表明,两者之间存在协同效应,并且该协同效应受温度的影响显著。在热溶温度为320~340 ℃时,对热溶物产率而言具有正的协同效应,也即其热溶物产率的实验值大于通过神府煤与稻杆单独热溶时热溶物产率经质量加权平均计算得到的理论值。在研究的热溶温度范围内,共热溶的热溶率实验值均低于质量加权平均的理论计算值。相对于理论计算值,在320 ℃时热溶物产率的实验值增加达到最大,为7.9%。此外,通过对热溶物的性质表征,还进一步探讨了共热溶过程中的协同作用机理。     

纳米CaCO3微晶的晶格畸变和反常红外特性

利用TEM、SEM、X射线衍射(XRD)和Voigt函数单峰分析法讨论了纳米CaCO₃微晶结构,解释了纳米CaCO₃微晶的反常红外吸收特性,并认为微结构中的尺寸效应使得纳米CaCO₃晶格中存在较大的畸变应力,从而引起了碳酸钙微晶的红外ν₃吸收峰有约40 cm^-1的蓝移和明显窄化。     

光散射法研究丙烯酸十八酯和苯乙烯微乳液 共聚机理

在十六烷基溴化吡啶/叔丁醇/15%丙烯酸十八酯和苯乙烯/水体系的O/W微乳液中,使用动态光散射法,研究其中两种单体共聚反应的成核机理。结果表明,聚合过程中乳胶粒成核位置主要在增溶胶囊的单体微珠中,乳胶粒主要依靠单体微珠不断提供单体而长大。     

溶剂萃取预处理对低阶煤大分子结构的影响

为了研究溶剂预处理对低阶煤的固有大分子结构的影响,本研究对锡林郭勒褐煤（XLL）和神府次烟煤（SFC）分别进行了四氢呋喃（THF）索氏抽提、二硫化碳/N-甲基-2-吡咯烷酮（CS₂/NMP）混合溶剂抽提及热溶处理,并对所得抽余煤进行了傅里叶红外漫反射光谱分析（DRIFT）、热重分析（TGA）、压汞法分析（MI）和溶胀度测定。结果表明,溶剂抽提导致煤大分子结构重排和再缔合。其中,THF索式抽提和CS₂/NMP混合溶剂抽提可以改变非共价键交联作用,特别是氢键作用分布,从而不同程度地松弛煤大分子结构。然而,高温溶剂热溶处理主要促进了煤大分子的共价键交联,尤其是对锡林郭勒褐煤（XLL）。所有抽取煤的溶胀都受Fickian扩散控制,且所有抽取煤的溶胀活化能都低于原煤。     

声表面波器件中非同步区域体波散射的抑制

用有限元/边界元法(FEM/BEM)研究了表面波器件中非同步区域中体波散射引起的损耗。以典型的hiccup单端对谐振器作参考结构,用结构参数缓慢变化的间隙取代其中间的自由间隙。研究发现,改变间隙参数可在保持谐振频率不变的同时,提高谐振器的品质因数值。对分布间隙和风琴间隙两种间隙结构进行对比,结果表明,前者优于后者。将传统DMS滤波器中的金属化间隙以分布间隙取代,可找到一个优化的分布间隙结构,使插损提高0.3 dB。     

煤沥青改质非等温动力学研究

The non-isothermal kinetics for mesophase transformation of Baogang-I coal tar pitch (I-CTP), soft pitch consisted of I-CTP and 18% phenanthrene residue oil (PRO) or I-CTP and 30% PRO have been studied in a thermal conversion unit. Kinetic parameters were calculated by using an integral method. Results showed that the process of mesophase pitch transformation could be described in first order reaction. The activation energy of I-CTP is 175.36kJ/ mol. But adding 30% PRO, which improved the reactivity of I-CTP with activation energy is 138.07kJ/mol, is not beneficial to mesophase transformation.     

亚共晶Al-Cu系激光引燃自蔓延合金微观表征及性能研究

对亚共晶Al-Cu粉末压坯,通过不同功率进行激光引燃自蔓延烧结。用OM、SEM、XRD进行微观组织表征,并对烧结合金进行耐磨等性能测试。结果表明：烧结后物相由CuAlO2、Al4Cu9、Al2O3等构成,组织为树枝状晶和胞状晶相间分布。在激光输出功率为950W,烧结后密度最大,为2.8101g/cm3,致密性达到最高点,耐磨性最佳,相对失重为3.66%。