Construction and qualification of the pre-series MQM superconducting quadrupoles for the LHC insertions

The LHC insertions will be equipped with individually powered MQM superconducting quadrupoles, produced in three versions with magnetic lengths of 2.4 m, 3.4 m, and 4.8 m. The quadrupoles feature a 56 mm aperture coil, designed on the basis of an 8.8 mm wide Rutherford-type NbTi cable for a nominal gradient of 200 T/m at 1.9 K and 5390 A. A total of 96 quadrupoles are in production in Tesla Engineering, UK. In this report we describe the construction of the pre-series MQM quadrupoles and present the results of the qualification tests.     

Magneto-optical spectroscopy of carbon nanotubes

We review our recent optical experiments on single-walled carbon nanotubes in high magnetic fields. The data revealed magnetic-field-induced optical anisotropy as well as broadening, splittings, and shifts of interband absorption and photoluminescence peaks. Quantitative comparison with theoretical predictions based on the Aharonov–Bohm effect is presented.     

Elasticity from the force network ensemble in granular media

Transmission of forces in static granular materials is studied within the framework of the force network ensemble, by numerically evaluating the mechanical response of hexagonal packings of frictionless grains and rectangular packings of frictional grains. In both cases, close to the point of application of the overload, the response is nonlinear and displays two peaks, while at larger length scales, it is linear and elasticlike. The crossover between these two behaviors occurs at a depth that increases with the magnitude of the overload and decreases with increasing friction.     

Design and fabrication of a 1 m model of the 70 mm bore twinaperture superconducting quadrupole for the LHC insertions

For reasons of geometrical acceptance, 70 mm bore twin aperture quadrupoles are required in the LHC insertions. For an operating gradient of 160 T/m at 4.5 K, a design based on a four layer coil wound from two graded 8.2 mm NbTi conductors has been developed. Three 1 m single aperture quadrupoles of this design have been built and successfully tested. Thereafter, the magnets have been disassembled and the coils re-collared using self-supporting collars. In this paper, we describe the design features of the twin aperture quadrupole, and report on the initial collaring tests and procedures for collaring and final assembly of the 1 m magnet     

Design and assembly of the pre-series quadrupoles for the LHC insertions

The LHC insertions are equipped with several different types of individually powered superconducting quadrupoles. These units comprise several quadrupole magnets and orbit correctors, and range in length from 5.3 m to 11.3 m. In spite of the variety of types and interface requirements, the design of the quadrupoles is based on the same principle where two welded half-shells provide the rigidity and alignment of the magnets and serve as a helium pressure vessel. In this paper we present the mechanical design of the LHC insertion quadrupoles, describe the initial experience in the assembly of the pre-series units, and report on the alignment measurements.     

A New Multilevel Conversion Structure for Grid-Connected PV Applications

A novel scheme for three-phase grid-connected photovoltaic (PV) generation systems is presented in this paper. The scheme is based on two insulated strings of PV panels, each one feeding the dc bus of a standard two-level three-phase voltage-source inverter (VSI). The inverters are connected to the grid by a three-phase transformer having open-end windings on the inverter side. The resulting conversion structure performs as a multilevel power active filter (equivalent to a three-level inverter), doubling the power capability of a single VSI with given voltage and current ratings. The multilevel voltage waveforms are generated by an improved space-vector-modulation algorithm, suitable for the implementation in industrial digital signal processors. An original control method has been introduced to regulate the dc-link voltages of each VSI, according to the voltage reference given by a single maximum power point tracking controller. The proposed regulation system has been verified by numerical simulations and experimental tests with reference to different operating conditions.     

Stability of high-density one-dimensional excitons in carbon nanotubes under high laser excitation

Through ultrafast pump-probe spectroscopy with intense pump pulses and a wide continuum probe, we show that interband exciton peaks in single-walled carbon nanotubes (SWNTs) are extremely stable under high laser excitations. Estimates of the initial densities of excitons from the excitation conditions, combined with recent theoretical calculations of exciton Bohr radii for SWNTs, suggest that their positions do not change at all even near the Mott density. In addition, we found that the presence of lowest-subband excitons broadens all absorption peaks, including those in the second-subband range, which provides a consistent explanation for the complex spectral dependence of pump-probe signals reported for SWNTs.     

Effects of Collar Permeability on the Field Quality of the Large Aperture Quadrupoles for the LHC

The LHC contains a number of large aperture quadrupoles (MQY) in the insertions. The acceptance of these magnets was based on warm magnetic measurements performed before delivery to CERN. During the series production of the MQY quadrupoles, the permeability of the collars drifted from the nominal value, and effects on the transfer function and multipole components became evident. To study the effects on the magnetic field, variable permeability of the stainless-steel collars as a function of local field and temperature was introduced into a numerical model. Comparing the results with measured data, we could isolate the contribution of permeability deviation on the magnetic field quality. The extrapolation of transfer function and field multipoles to operating temperature and current gives the necessary offsets, which are compared with measurements on a reduced set of magnets.     

Fabrication of the pre-series wide aperture superconducting quadrupoles for the LHC insertions

Individually powered superconducting quadrupoles with a coil bore of 70 mm will be installed in the LHC insertions, in areas where increased geometrical acceptance and improved field quality are required. The quadrupoles feature a four-layer coil, designed on the basis of two graded 8.3 mm wide Rutherford-type NbTi cables. The magnets have a magnetic length of 3.4 m and a nominal gradient of 160 T/m at 4.5 K and 3610 A. A total of 26 quadrupoles are in production at ACCEL Instruments (Germany). In this report, we present the experience in fabrication of the pre-series magnets and the results of the initial qualification tests.