Self‐curable polyester by a reaction of glycidol with maleic anhydride

The controlled reaction of equimolar quantities of maleic anhydride and glycidol in dimethoxyethane gives soluble polyesters with one hydroxyl group in each repeating unit. The reaction proceeds with stepwise ring opening of the components and gives highly viscous clear solutions in relatively short periods. In the first step, monomaleate ester formation takes place around 80 °C. The ring opening of the oxirane group is the second step, and it occurs at 120 °C. The overall reaction is the formation of soluble polyesters with moderate molecular weights (6000–18,000), without the elimination of water. The soluble polyesters can be crosslinked tightly by direct heating at 190 °C without additional vinyl monomer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2549–2555, 2003     

Weighted extended b-splines for one-dimensional electromagnetic problems

This paper considers the weighted extended b-splines as basis function for finite element method in electromagnetics and compares with the standard finite element method applied to the two-point boundary value problems with different boundary conditions. This new approach, which provides more accurate results than standard finite element method, is presented to compare other numerical techniques and applied to one-dimensional electromagnetic problems. Computed results are compared with other numerical results in literature.     

Aggregate States and Energetic Disorder in Highly Ordered Nanostructures of para‐Sexiphenyl Grown by Hot Wall Epitaxy

We report on photoluminescence (PL) and thermally stimulated luminescence (TSL) in highly ordered nanostructures of para‐sexiphenyl (PSP) grown by hot wall epitaxy (HWE). A low‐energy broad band is observed in the PL spectra that can be attributed to the emission from molecular aggregates. While the intrinsic exciton emission in steady‐state PL dominates at low temperatures, the emission from aggregates increases with elevating temperature and its magnitude depends sensitively on film preparation conditions. Time‐resolved PL measurements showed that the aggregate emission decays with a life‐time of ≈ 4 ns, which is approximately an order of magnitude larger than the lifetime of singlet excitons. TSL data suggests the presence of an energetically disordered distribution of localized states for charge carriers in PSP films, which results from an intrinsic disorder in this material. A low‐temperature TSL peak with the maximum at around 30 K evidences for a weak energy disorder in PSP films, and has been interpreted in terms of a hopping model of TSL in disordered organic materials.     

Models for copper proteins. Copper(I) and (II) complexes of a novel binucleating tetraamino-tetrathioether ligand

The novel binucleating ligand, 6,6 prime-methylene-bis(5 prime-amino-3 prime,4 prime-benzo-2 prime-thiapentyl)-1,11-diamino-2,3:9,10-dibenzo-4,8-dithiaundecane (H4L) was prepared and reacted with copper(II) salts in dry MeOH to yield mixtures of copper(I) and copper(II) complexes with Cl- and ClO-4 counter ions. The amine functions on the ligand release protons to form copper(I) complexes: (Cu2L)X2, where X=Cl−, ClO4-. The complexes were oxidized to (Cu2L)X4 with H2O2 in DMF; Cu(NO3)2 gave a different complex, [Cu2(H4L)(NO3)2](NO3)2, as regards proton releasing ability, coordination and oxidation number. Evidence for the structures of this new tetraamino-tetrathioether ligand and its copper complexes is provided by 1H-, 13C-n.m.r., mass, u.v.–vis., i.r. spectra, elemental analyses, molar conductivities and magnetic moments. This revised version was published online in June 2006 with corrections to the Cover Date.     

The effect of intramolecular‐hydrogen bonds in the synthesis of novel imidates from a 13‐membered dioxadithia crown ether diester

The synthesis and structural properties of three novel imidates, 11,13‐bis‐(2‐amino‐ethylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane ( 2 ), 11,13‐bis‐(3‐aminopropylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane, ( 3 ) and 2,11‐dioxa‐5,8‐dithia‐13,16,19,22‐tetraazabicyclo[10.10.1]tricosa‐1(22),12‐diene, ( 4 ) have been described. These compounds were synthesized by treating 1,10‐dioxa‐4,7‐dithiacyclotridecane‐11,13‐diester ( 1 ) with the appropriate diamine under N₂ and their structures have been characterised by elemental analyses, ¹H‐ and ¹³C‐nmr, ir, and mass spectral studies. Elemental analyses and spectroscopic data support the proposed imidate structures. In addition, total energy and heat of formation (Figure 2) calculated for imidates 2a‐4a and 2b‐4b by the semiempirical AM1 calculations have shown that imidates 2b‐4b having intramolecular hydrogen bonds are more stable (5‐10 kcal/mol) than compounds 2a‐4a .     

DNA Hydrolysis by Homo- and Heteronuclear Cu(II)–Ni(II) Complexes of Two Diester-type Ligands

Nucleolytic activities of novel mononuclear Cu(II), homo- and heterodinuclear Cu(II)–Ni(II) complexes with two diester-type ligands were investigated on pCYTEXP by neutral agarose gel electrophoresis. The analyses of the cleavage products obtained electrophoretically indicate that the examined complexes induce very similar conformational changes on supercoiled DNA by converting supercoiled form to nicked form. At concentrations greater than 100M, the complexes possessed effective nucleolytic activities for 10min of incubation time. However, their nucleolytic activities did not increase significantly with longer periods of incubation. The pH-nucleolytic activity profiles of the complexes differed significantly. Metal complex induced DNA cleavage was also tested for inhibition by various radical scavengers. It could be proposed from the data that diffusible intermediate oxidants are not involved in these reactions or they are not necessary for DNA cleavage since none of antioxidants inhibited DNA cleaving activities of the complexes.     

Characterization of glucoamylase immobilized on celite

Immobilization of glucoamylase (EC 3.2.1.3) on Celite R649 bio-catalyst carrier for hydrolysis of maltose and maltodextrin has been investigated in both packed bed and recirculated batch reactors. The kinetics parameters on the hydrolysis of maltose were estimated from the packed bed reactor. It is found that this immobilized enzyme is as efficient as the soluble enzyme in catalyzing hydrolysis of maltose. However, it is less efficient than the soluble enzyme in hydrolyzing 30% (w/v) maltodextrin, giving a maximum dextrose equivalent (DE) value of 96.0% instead of 98.2%.     

Synthesis and structural studies of (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}pyridin-2-yl)imino]butan-2-one oxime, ligand and its mono-, di- and trinuclear copper(II) complexes

A new dioxime ligand, (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}-pyridin-2-yl)imino]butan-2-one oxime, (H₂Pymdo) (3) has been synthesized in H₂O by reacting 2,3-butenedione monoxime (2) with 2,6-diaminopyridine. Mono-, di- and tri-nuclear copper(II) complexes of the dioxime ligand (H₂Pymdo) and/or 1,10-phenanthroline have been prepared. The dioxime ligand (H₂Pymdo) and its copper(II) complexes were characterized by ¹H-n.m.r., ¹³C-n.m.r. and elemental analyses, magnetic moments, i.r. and mass spectral studies. The mononuclear copper(II) complex of H₂Pymdo was found to have a 1:1 metal:ligand ratio. Elemental analyses, stoichiometric and spectroscopic data of the metal complexes indicated that the metal ions are coordinated to the oxime and imine nitrogen atoms (C=N). In the dinuclear complexes, in which the first Cu(II) ion was complexed with nitrogen atoms of the oxime and imine groups, the second Cu(II) ion is ligated with dianionic oxygen atoms of the oxime groups and are linked to the 1,10-phenanthroline nitrogen atoms. The trinuclear copper(II) complex (6) was formed by coordination of the third Cu(II) ion with dianionic oxygen atoms of each of two molecules of the mononuclear copper(II) complexes. The data support the proposed structure of H₂Pymdo and its Cu(II) complexes.     

Structural, Electronic, and Optical Properties of Noble Metal Clusters from First Principles

We examine low-energy isomeric forms, static polarizabilities, and optical absorption spectra of Ag _n , n = 2–8, and Au _n , n = 2–3, clusters using first principles computations within the static and time-dependent versions of the density functional theory. The noticeable decrease in the static polarizabilities of Ag₇ and Ag₈ compared to the values characteristic of Ag _n , n = 2–6, is correlated with the transition from two-dimensional to three-dimensional structures at n = 7. The optical spectra computed within the time-dependent local density approximation for the most stable structures are in good agreement with the available experimental data and the results of earlier theoretical studies. Optical spectra of higher-energy isomers typically present features that are not observed in the experimental spectra. The d electrons affect the spectra of noble metal clusters by quenching the oscillator strengths through screening of the s electrons and by getting directly involved in the excitations. Due to the larger s–d hybridization in Au compared to Ag, these effects are more pronounced in Au _n clusters.