基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。     

Generalized fractional maximal and integral operators on Orlicz and generalized Orlicz–Morrey spaces of the third kind

Positivity - In the present paper, we will characterize the boundedness of the generalized fractional integral operators $$I_{\rho }$$ and the generalized fractional maximal operators $$M_{\rho }$$...     

微波辅助快速制备核-壳型尿苷印迹聚合物及其在线富集应用研究

采用微波辅助加热,以尿苷为模板分子,丙烯酰胺(AA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,快速制备尿苷印迹聚合物,聚合时间大大缩短,仅为传统加热的1/8.采用红外光谱和扫描电镜对印迹聚合物进行表征,结果表明二氧化硅表面成功包覆尿苷印迹壳层;该印迹聚合物颗粒分散均匀,印迹壳层厚度约为100 nm.将该印...     

Observational constraints on decaying vacuum dark energy model

The decaying vacuum model (DV), treating dark energy as a varying vacuum, has been studied well recently. The vacuum energy decays linearly with the Hubble parameter in the late-times, ρ _Λ (t)∝H(t), and produces the additional matter component. We constrain the parameters of the DV model using the recent data-sets from supernovae, gamma-ray bursts, baryon acoustic oscillations, CMB, the Hubble rate and X-rays in galaxy clusters. It is found that the best fit of the matter density contrast Ω _m in the DV model is much lager than that in ΛCDM model. We give the confidence contours in the Ω _m –h plane up to 3σ confidence level. Besides, the normalized likelihoods of Ω _m and h are presented, respectively.     

A 4-Methylumbelliferone-based Fluorescent Probe for Sodium New Houttuyfonate

A new fluorogenic probe for sodium new houttuyfonate (SNH) was proposed. 4‐Methylumbelliferyl‐2,4‐dinitrobenzenesulfonate (4‐MUDNBS) was a nonfluorescent compound and was synthesized via the one‐step reaction of 4‐methylumbelliferone (4‐MU) with 2,4‐dinitrobenzenesulfonyl chloride. In basic media, SNH was decomposed to produce sodium sulfite, which then reacted with 4‐MUDNBS to yield highly fluorescent 4‐MU, hence leading to the fluorescence increase of the reaction solution. A linear correlation existed between the emission intensity and the concentration of SNH within the range from 0.5 to 15 μg·mL⁻¹ with a detection limit of 0.15 μg· mL⁻¹ (3δ). The effect of substituents on the benzenesulfonyl moiety of the probe is discussed, and the presence of electronegative groups is favorable for the proposed cleavage reaction.     

斜对称双对角矩阵特征值反问题

讨论了关于斜对称双对角矩阵的特征值反问题．即：已知一个n阶斜对称双对角矩阵的特征值和两个n-1阶子矩阵的部分特征值，则可求得该矩阵．最后给出了数值例子．     

Adsorption of sophorolipid biosurfactants on their own and mixed with sodium dodecyl benzene sulfonate, at the air/water interface

The adsorption of the lactonic (LS) and acidic (AS) forms of sophorolipid and their mixtures with the anionic surfactant sodium dodecyl benzene sulfonate (LAS) has been measured at the air/water interface by neutron reflectivity, NR. The AS and LS sophorolipids adsorb with Langmuir-like adsorption isotherms. The more hydrophobic LS is more surface active than the AS, with a lower critical micellar concentration, CMC, and stronger surface adsorption, with an area/molecule ～70 ?(2) compared with 85 ?(2) for the AS. The acidic sophorolipid shows a maximum in its adsorption at the CMC which appears to be associated with a mixture of different isomeric forms. The binary LS/AS and LS/LAS mixtures show a strong surface partitioning in favor of the more surface active and hydrophobic LS component but are nevertheless consistent with ideal mixing at the interface. In contrast, the surface composition of the AS/LAS mixture is much closer to the solution composition, but the surface mixing is nonideal and can be accounted for by regular solution theory, RST. In the AS/LS/LAS ternary mixtures, the surface adsorption is dominated by the sophorolipid, and especially the LS component, in a way that is not consistent with the observations for the binary mixtures. The extreme partitioning in favor of the sophorolipid for the LAS/LS/AS (1:2) mixtures is attributed to a reduction in the packing constraints at the surface due to the AS component. Measurements of the surface structure reveal a compact monolayer for LS and a narrow solvent region for LS, LS/AS, and LS/LAS mixtures, consistent with the more hydrophobic nature of the LS component. The results highlight the importance of the relative packing constraints on the adsorption of multicomponent mixtures, and the impact of the lactonic form of the sophorolipid on the adsorption of the sophorolipid/LAS mixtures.     

Chiral separation and determination of ofloxacin enantiomers by ionic liquid-assisted ligand-exchange chromatography

A simple and accurate method for the separation and determination of ofloxacin enantiomers was developed by ionic liquid-assisted ligand-exchange high performance liquid chromatography. Both achiral and chiral ionic liquids were tested for their efficiency of ofloxacin enantiomeric separation. The effects of ligands, concentration of metal ion, organic modifier, pH of the mobile phase, and temperature were also investigated and evaluated. Optimal conditions were obtained on a conventional C(18) column, where the mobile phase consisted of methanol/water (20 : 80, v/v) (containing 4.0 mmol L(-1) amino acid ionic liquid and 3.0 mmol L(-1) copper sulfate) at a flow rate of 0.5 mL min(-1). Under this condition, the ofloxacin enantiomers could be baseline separated within 14 minutes; the proposed method was used to analyze different commercial ofloxacin medicines.