The Effect of the Spacer of Bis(biurea) Ligands on the Structure of A2L3‐type (A=anion) Phosphate Complexes

By tuning the length and rigidity of the spacer of bis(biurea) ligands L, three structural motifs of the A₂L₃ complexes (A represents anion, here orthophosphate PO₄^3?), namely helicate, mesocate, and mono‐bridged motif, have been assembled by coordination of the ligand to phosphate anion. Crystal structure analysis indicated that in the three complexes, each of the phosphate ions is coordinated by twelve hydrogen bonds from six surrounding urea groups. The anion coordination properties in solution have also been studied. The results further demonstrate the coordination behavior of phosphate ion, which shows strong tendency for coordination saturation and geometrical preference, thus allowing for the assembly of novel anion coordination‐based structures as in transition‐metal complexes.     

移动通信系统中功率控制研究

在阐述功率控制在移动通信系统中的发展过程的基础上，着重研究了WCDMA系统的功率控制，最后对功率控制未来的研究方向做了简要的分析。     

基于CATV的一站式电子政务系统的构建

电子政务是Internet网络上的综合应用,利用外交互式技术在CATV网络上构建一站式电子政务是充分利用现有的CATV网络资源的最好选择;在CATV网络上构建电子政务最关键的是要建立起安全的信息通道,安全的信息通道的建立必须借助于PKI技术.     

HIRFL–CSR加速器中束流与真空中剩余气体的碰撞损失

研究了重离子加速器中束流与真空中剩余气体的碰撞损失过程和碰撞截面,在依据大量实验数据的基础上,提出了一组计算离子一原子的电荷交换截面的经验公式.以兰州重离子加速器HDRFL及冷却储存环CSR为例,给出了依据碰撞截面的公式计算束流在加速器真空中的传输效率的方法,并计算了在不同真空度下HIRFL的ECR源轴向注入束运线、注入器SFC、前束运线、主加速器SSC和后束运线等不同加速阶段及CSR的传输效率,并提出合理的真空度要求.HIRFL的真空分布测量和束流的损失测量证明了该计算方法的可靠性.     

激光除冰研究

架空输送电线路因覆冰而导致的事故危害性很大,本文总结了目前国内外输电线路导线覆冰的现状。统计国内外探索出来的各种预防,融化,除冰等很多解决方案。通过研究和探讨,分析导线覆冰的传热和能量,运用了多种激光器进行激光熔(除)冰实验,比较研究二氧化碳激光器的除冰情况。以及提出激光熔冰的方法、研究方向和前景。     

IPv6与欧洲

在推进IPv6的问题上,亚洲表现的最为积极,这是因为亚洲各国承受着巨大的IP地址方面的压力。欧洲虽然在这方面没有这样大的压力,但在互联网方面一直落后于美国,这是欧洲所不甘心的。因此,欧洲在推进IPv6方面也做了许多工作。欧洲推进IPv6的基本策略是先移动,后固定,并实施了一系列的行动计划和项目。欧洲面临的挑战主要是已经部署了数量巨大的网元、操作系统与软件应用必须予以更新、互通或取代,需要仔细规划和大量投资。     

Ultra-wideband bandpass filter with hybrid microstrip/CPW structure

A novel ultra-wideband (UWB) bandpass filter (BPF) is presented using the hybrid microstrip and coplanar waveguide (CPW) structure. A CPW nonuniform resonator or multiple-mode resonator (MMR) is constructed to produce its first three resonant modes occurring around the lower end, center, and higher end of the UWB band. Then, a microstrip/CPW surface-to-surface coupled line is formed and modeled to allocate the enhanced coupling peak around the center of this UWB band, i.e., 6.85GHz. As such, a five-pole UWB BPF is built up and realized with the passband covering the entire UWB band (3.1-10.6GHz). A predicted frequency response is finally verified by the experiment. In addition, the designed UWB filter, with a single resonator, only occupies one full-wavelength in length or 16.9mm.     

Passively Q -switched Ytterbium-Doped Double-Clad Fiber Laser With a Cr4+:YAG Saturable Absorber

A high-power and high-repetition-rate passively Q -switched ytterbium-doped single-mode double-clad fiber laser was built using a Cr⁴⁺:YAG saturable absorber (SA). Two different SAs with initial transmissions of T_omicron = 30% and T_omicron = 50% were studied. At the maximum coupled pump power of 9.8 W, an output power of 4.7 W, pulse duration of 143 ns, pulse repetition rate of 253 KHz, pulse energy of 18.5 muJ, and slope efficiency of 49% were obtained with the T_omicron = 30% SA.