Towards a Better Prediction of Cell Settling on Nanostructure Arrays—Simple Means to Complicated Ends

Vertical arrays of nanostructures (NSs) are emerging as promising platforms for probing and manipulating live mammalian cells. The broad range of applications requires different types of interfaces, but cell settling on NS arrays is not yet fully controlled and understood. Cells are both seen to deform completely into NS arrays and to stay suspended like tiny fakirs, which have hitherto been explained with differences in NS spacing or density. Here, a better understanding of this phenomenon is provided by using a model that takes into account the extreme membrane deformation needed for a cell to settle into a NS array. It is shown that, in addition to the NS density, cell settling depends strongly on the dimensions of the single NS, and that the settling can be predicted for a given NS array geometry. The predictive power of the model is confirmed by experiments and good agreement with cases from the literature. Furthermore, the influence of cell‐related parameters is evaluated theoretically and a generic method of tuning cell settling through surface coating is demonstrated experimentally. These findings allow a more rational design of NS arrays for the numerous exciting biological applications where the mode of cell settling is crucial.     

An anisotropic fibre-network model for mechano-sorptive creep in paper

In this paper a simplified network model for mechano-sorptive creep is presented, which is a further development of an earlier paper [Strömbro, J., Gudmundson, P., 2008. Mechano-sorptive creep under compressive loading – a micromechanical model. International Journal of Solids and Structures 45 (9), 2420–2450.]. It is assumed that the anisotropic hygroexpansion of the fibres leads to large stresses at the fibre bonds when the moisture content changes. The resulting stress state will accelerate creep if the fibre material obeys a constitutive law that is non-linear. Fibre kinks are included in order to capture experimental observations of larger mechano-sorptive effects in compression than in tension. Moisture dependent material parameters and anisotropy in the fibre distribution have been introduced. Theoretical predictions based on the model are compared to experimental results for an anisotropic paper both under tensile and compressive loading at varying moisture content and it is found that the important features in the experiments are captured by the model. Different kinds of drying conditions have also been examined.     

Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels

This paper introduces a method of combining open and closed microchannels in a single component in a novel way which couples the benefits of both open and closed microfluidic systems and introduces interesting on-chip microfluidic behaviour. Fluid behaviour in such a component, based on continuous pressure driven flow and surface tension, is discussed in terms of cross sectional flow behaviour, robustness, flow-pressure performance, and its application to microfluidic interfacing. The closed-open-closed microchannel possesses the versatility of upstream and downstream closed microfluidics along with open fluidic direct access. The device has the advantage of eliminating gas bubbles present upstream when these enter the open channel section. The unique behaviour of this device opens the door to applications including direct liquid sample interfacing without the need for additional and bulky sample tubing.     

Cover Picture

The cover picture shows in the background the whole cell of a methanotrophic bacterium on which are superimposed components of methane monooxygenase (the structure of the hydroxylase component (top), one of the two four-helix bundles that house the catalytic diiron centers (left)) and a schematic diagram of the catalytic cycle by which the enzyme converts dioxygen and methane into methanol and water. More about this unusual enzyme system is reported by Lippard et al. on p. 2782 ff.     

Poly(ε-caprolactone) macroligands with β-diketonate binding sites: synthesis and coordination chemistry

Dibenzoylmethane (dbm) initiators with one and two alcohol sites were used to generate dbm end-functionalized and dbm-centered poly(ε-caprolactone) macroligands (dbmPCL and dbmPCL₂) with low polydispersities (∼1.1). Chelation of polymeric ligands to metal ions (Eu³⁺, Fe³⁺, Ni²⁺ and Cu²⁺) produced metal-centered star polymers, which were characterized by UV-vis and fluorescence spectroscopy, as well as gel permeation chromatography.     

Protective effects of cyanidin-3-O-beta-glucopyranoside against UVA-induced oxidative stress in human keratinocytes

Ultraviolet-A (UVA) radiation causes significant oxidative stress because it leads to the generation of reactive oxygen species (ROS), leading to extensive cellular damage and eventual cell death either by apoptosis or necrosis. We evaluated the protective effects of cyanidin-3-O-beta-glucopyranoside (C-3-G) against UVA-induced apoptosis and DNA fragmentation in a human keratinocyte cell line (HaCaT). Treatment of HaCaT cells with C-3-G before UVA irradiation inhibited the formation of apoptotic cells (61%) and DNA fragmentation (54%). We also investigated antioxidant properties of C-3-G in HaCaT cells against ROS formation at apoptotic doses of UVA; C-3-G inhibited hydrogen peroxide (H2O2) release (an indicator of cellular ROS formation) after UVA irradiation. Further confirmation of the potential of C-3-G to counteract UVA-induced ROS formation comes from our demonstration of its ability to enhance the resistance of HaCaT cells to the apoptotic effects of both H2O2 and the superoxide anion (O2*-), two ROS involved in UVA-oxidative stress. Furthermore, in terms of Trolox Equivalent Antioxidant Activity, C-3-G treatment led to a greater increase in antioxidant activity in the membrane-enriched fraction than in the cytosol (55% vs 19%). The protective effects against UVA-induced ROS formation can be attributed to the higher membrane levels of C-3-G incorporation. These encouraging in vitro results support further research into C-3-G (and other anthocyanins) as novel agents for skin photoprotection.     

N-Heterocyclic carbene–carbodiimide (NHC–CDI) betaine adducts: synthesis,characterization, properties,and applications

N-Heterocyclic carbenes (NHCs) are an important class of reactive organic molecules used as ligands, organocatalysts, and σ-donors in a variety of electroneutral ylide or betaine adducts with main-group compounds. An emerging class of betaine adducts made from the reaction of NHCs with carbodiimides (CDIs) form zwitterionic amidinate-like structures with tunable properties based on the highly modular NHC and CDI scaffolds. The adduct stability is controlled by the substituents on the CDI nitrogens, while the NHC substituents greatly affect the configuration of the adduct in the solid state. This Perspective is intended as a primer to these adducts, touching on their history, synthesis, characterization, and general properties. Despite the infancy of the field, NHC–CDI adducts have been applied as amidinate-type ligands for transition metals and nanoparticles, as junctions in zwitterionic polymers, and to stabilize distonic radical cations. These applications and potential future directions are discussed.

N-heterocyclic carbene-carbodiimide betaine adducts are zwitterionic amidinate-like structures with tunable properties that have applications as ligands, junctions in supramolecular polymers, and stabilizers for radical cations.     

Stereodynamics of 9,11-Diphenyl-10-azatetracyclo[6.3.0.0.(4,11)0.(5,9)]undecanes. Highly Restricted Nitrogen Inversion and Isolated Phenyl Rotation. X-ray Crystallographic, Dynamic NMR, and Molecular Mechanics Studies

The (1)H NMR spectra of 10-benzyl-9,11-diphenyl-10-azatetracyclo[6.3.0.0.(4,11)0.(5,9)]undecane (BnPh(2)()) and 10-methyl-9,11-diphenyl-10-azatetracyclo[6.3.0.0.(4,11)0.(5,9)]undecane (MePh(2)()) decoalesce due to slowing inversion at nitrogen and to slowing isolated bridgehead phenyl rotation. The high nitrogen inversion barriers in MePh(2)() (DeltaG() = 12.2 +/- 0.1 kcal/mol at 250 K) and BnPh(2)() (DeltaG() = 10.6 +/- 0.1 kcal/mol at 215 K) are typical of tertiary amines in which at least one C-N-C bond angle is constrained to a small value. Compared to the minuscule rotation barriers about sp(2)-sp(3) carbon-carbon bonds in simple molecular systems, the bridgehead phenyl rotation barriers in MePh(2)() (DeltaG() = 9.8 +/- 0.1 kcal/mol at 210 K) and BnPh(2)() (DeltaG() = 9.8 +/- 0.1 kcal/mol at 210 K) are unusually high. Molecular mechanics calculations (MMX force field) suggest that the origin of the high phenyl rotation barriers lies in the close passage of an o-phenyl proton and a methyl (or benzylmethylene) proton in the transition state. BnPh(2)() crystallized from hexane as white needles in the monoclinic system Pn. Unit cell dimensions are as follows: a = 12.198(1) ?, b = 6.1399(6) ?, c = 14.938(2) ?, beta = 107.470(4) degrees, V = 1067.1(2) ?(3), Z = 2. In the crystal molecular structure, the imine bridge CNC bond angle in BnPh(2)() is constrained to a small value (96 degrees ). The benzylic phenyl group is oriented gauche to the nitrogen lone pair.     

Propagation of melting cooperativity along the phosphodiester backbone of DNA

The role of the DNA phosphodiester backbone in the transfer of melting cooperativity between two helical domains was experimentally addressed with a helix-bulge-helix DNA model, in which the bulge consisted of a varying number of either conformationally flexible propanediol or conformationally constrained bicyclic anucleosidic phosphodiester backbone units. We found that structural communication between two double helical domains is transferred along the DNA backbone over the equivalent of ca. 12-20 backbone units, depending on whether there is a symmetric or asymmetric distribution of the anucleosidic units on both strands. We observed that extension of anucleosidic units on one strand only suffices to disrupt cooperativity transfer in a similar way as if extension occurs on both strands, indicating that the length of the longest anucleosidic inset determines cooperativity transfer. Furthermore, conformational rigidity of the sugar unit increases the distance of coopertivity transfer along the phosphodiester backbone. This is especially the case when the units are asymmetrically distributed in both strands.     

Preparation and chemistry of phosphoranyl-derived iodanes

The preparation and chemistry of novel phosphoranyl-derived lambda(3)-iodanes is reported. The phosphoranyl-derived phenyliodonium sulfonates were prepared in good yields by the reaction of stabilized phosphonium ylides [1-triphenylphosphoranylidene-2-propanone, methyl(triphenylphosphoranylidene)acetate, (triphenylphosphoranylidene)acetaldehyde, and (triphenylphosphoranylidene)acetonitrile] with the pyridinium complex of iodobenzene ditriflate or with [hydroxy(tosyloxy)iodo]benzene under mild conditions. These compounds represent a potentially useful class of reagents that combine in one molecule synthetic advantages of a phosphonium ylide and an iodonium salt. Specifically, phosphorane-derived phenyliodonium tosylates can react with soft nucleophiles, such as iodide, bromide, benzenesulfinate, and thiophenolate anions, with a selective formation of the respective alpha-functionalized phosphonium ylides, which can be further converted to alkenes by the Wittig reaction with benzaldehyde. The phosphoranyl-derived benziodoxoles can be prepared by the reaction of 1-acetoxybenziodoxole with stabilized phosphonium ylides. An unusual ligand exchange on the iodine(III) center resulting in the substitution of a carbon ligand with an oxygen ligand was observed in the reaction of these compounds with strong acids.