Sensorless speed measurement using current harmonic spectralestimation in induction machine drives

This paper proposes a sensorless speed measurement scheme that improves the performance of transducerless induction machine drives, especially for low-frequency operation. Speed-related harmonics that arise from rotor slotting and eccentricity are analyzed using digital signal processing. These current harmonics exist at any nonzero speed and are independent of time-varying parameters, such as stator winding resistance. A spectral estimation technique combines multiple current harmonics to determine the rotor speed with more accuracy and less sensitivity to noise than analog filtering methods or the fast Fourier transform. An on-line initialization routine determines machine-specific parameters required for slot harmonic calculations. This speed detector, which has been verified at frequencies as low as 1 Hz, can provide robust, parameter-independent information for parameter tuning or as an input to a sensorless flux observer for a field-oriented drive. The performance of the algorithm is demonstrated over a wide range of inverter frequencies and load conditions     

Liquid crystal properties of some substituted pyrazines

A number of biphenyl, terphenyl analogues and ethynes which contain a pyrazine ring have been made and their liquid crystal transition temperatures, together with examples of birefringence measurements, are reported. All the 2,5-disubstituted pyrazine systems are liquid crystalline showing high birefringence values for the biphenyl and terphenyl analogues, whereas the 1,5-disubstituted systems are not liquid crystalline. The pyrazine ethyne systems exhibit very high birefringence values. X-ray diffraction has been used to identify the liquid crystal phases of 2-n-nonyloxy-5-(4'-propylbiphenyl-4-yl)pyrazine.     

An image processing IC for backprojection and spatial histogrammingin a pipelined array

The first VLSI digital signal processor that performs both high-precision image backprojection and spatial histogram calculations at raster-scan rates as high as 30 MHz is described. Realized in 1 μm CMOS technology, this 13.3 mm×13.3 mm chip is designed to handle images as large as 1024×1024 12 b pixels. Loadable coefficients and a unified architecture allow this IC to be used with a variety of computed-tomography scanners for image reconstructions, including fan- and parallel-beam reconstruction. This chip also computes the forward Radon transform, which is a spatial histogram, permitting it to be used for iterative reconstruction algorithms. The bit lengths in the fixed-point architecture assure 12 b reconstruction accuracy     

An 80-Msample/s video switched-capacitor filter using a parallelbiquadratic structure

This paper describes a fifth-order, low-pass switched capacitor filter for video applications. It has a 4-MHz cutoff frequency and uses a parallel biquadratic structure with double sampling to achieve an 80-MHz input sampling rate in a 2-μm CMOS process. The prototype filter is fully differential, occupies an active area of 11 mm² , and dissipates 190 mW     

A mixed-signal RAM decision-feedback equalizer for disk drives

A mixed-signal RAM decision-feedback equalizer (DFE) that operates at 90 Mb/s is described. In the analog domain, the DFE subtracts intersymbol interference caused by the past four outputs. The equalized signal is fed into a nonuniform flash analog-to-digital converter (ADC) to produce the decision output and error signal used to adapt the RAM contents in the digital domain. With a 5 V supply voltage, the power dissipation is 260 mW during steady-state operation. The active area is 4.5 mm² in a 1 μm CMOS process     

Miller compensation using current buffers in fully differential CMOS two-stage operational amplifiers

Several Miller compensation schemes using a current buffer in series with the compensation capacitor to modify the right-half-plane zero in fully differential two-stage CMOS operational amplifiers are analyzed. One scheme uses a current mirror as a current buffer, while the rest use a common-gate transistor as a current buffer. The gain transfer functions are derived for each topology, and approximate transfer-function coefficients are found that allow accurate estimation of the zero(s) and poles.     

Numerical diffraction coefficients for surface waves

The numerical uniform theory of diffraction (UTD) is extended to include surface waves. A method for extracting surface wave diffraction coefficients from moment method data is given and Prony's method is applied to the problem of determining surface wave propagation constants. The method is validated through comparison with the exact solution of the problem of surface wave diffraction by a truncated dielectric slab recessed in a conducting surface. Examples are given for scattering from dielectric slabs and frequency-selective surfaces and for radiation from a conformal microstrip antenna with a truncated substrate. The accuracy obtained is demonstrated by comparison with moment method calculations     

The preparation of 4-oxo-N-aryl-4H-1-benzopyran-2-acetamides by the condensation/cyclization of trilithiated acetoacetanilides with lithiated methyl salicylates

Several acetoacetanilides were trilithiated in excess lithium diisopropylamide, and the resulting polylithiated intermediates were regioselectively condensed with lithiated methyl salicylates followed by acid cyclization to substituted 4-oxo-N-aryl-4H-1-benzopyran-2-acetamides (benzopyranone-2-acetamides).     

Homo-dinuclear σ-alkynyl complexes: past, present and opportunities

Homo-dinuclear alkynyl complexes with a distinct metal–metal bond constitute a rapidly growing field, where the focus is placed on compounds based on ruthenium, molybdenum, tungsten or rhodium. Interesting characteristics of these complexes include paramagnetism, intense charge-transfer absorptions, tunable bridging ligands, which may not be easily accessible in mononuclear acetylide systems. These complexes have significant potential for use in both molecular electronics and supramolecular chemistry. In this short account, previous work in this area is assessed, and each of the major groups of complexes is discussed in terms of both the synthetic strategies and structural motifs.     

Determination of aflatoxins in peanut products using reverse phase HPLC

A high performance liquid chromatographic (HPLC) method is described for the determination of the four major aflatoxins, B1, B2, G1 and G2, in peanut products. The aflatoxins are extracted by adapting a procedure developed by Pons (1) at the SRRC, USDA, and quantitated utilizing a new 5 mum reverse-phase column with NaCl/acetontrile/methanol mobile phase (3 + 1 + 1). The 5 mum column achieved baseline resolution of each of the four aflatoxins. Retention times and peak heights were reproducible. The procedure was successfully applied to several types of peanut products and was applicable to both roasted and unroasted peanuts, which is a decided advantage over the current CB and BF extraction methods. Additionally, it can be used for sweetened peanut matrixes with no interferences in the chromatography. The total time required for sample preparation and aflatoxin determination is less than 1.5 hours.