Characterization of small-signal intensity modulation of single-mode fiber grating Fabry-Perot laser source

A comprehensive study on the small-signal intensity modulation (IM) characteristics of a fiber grating Fabry-Perot (FGFP) laser is numerically investigated. The effect of external optical feedback (OFB), temperature, injection current, cavity volume, nonlinear gain compression factor, and fiber grating (FG) parameters on IM characteristics are presented. The temperature dependence (TD) of IM is calculated according to the TD of laser cavity parameters instead of using the well-known Parkove relationship. It has been shown that the optimum external fiber length (L _ext) is 3.1 cm. The optimum range of working temperature for FGFP laser is between 23 to 27 °C. We also show that by increasing the laser injection current from 10 to 60 mA, the IM peak amplitude decreased from 6.3 to 0.2 dB and the relaxation-oscillation frequency (ROF) is shifted from 1.2 GHz towards higher frequency of 5.48 GHz. In addition, the AR coating reflectivity and gain compression factor have no significant effect on the IM. The study indicates that a stable operation and excellent modulation characteristic can be obtained after optimization process.     

Improving the performance of electrical duty-cycle division multiplexing with optimum signal level spacing

Performance optimization of 3 × 10 Gbps conventional electrical-duty-cycle division multiplexing (C-E-DCDM) technique is investigated. It is shown that controlling signal level spacing can optimize its performance. Two level spacing optimization techniques, one in electrical domain and another in optical domain are examined. In general, performance of the C-E-DCDM is improved significantly using both approaches. The results show by optimization, an improvement of around 5.5 dB can be achieved for the C-E-DCDM in terms of receiver sensitivity and optical signal-to-noise ratio using both electrical and optical methods. However, chromatic dispersion tolerance in one of the optimization approaches is degraded by around 34 ps/nm for negative dispersion, while the positive dispersion tolerance improved compared to the C-E-DCDM.     

Improving the performance of three level code division multiplexing using the optimization of signal level spacing

In order to optimize the performance of three level code division multiplexing (3LCDM) at 2×20 Gb/s data rate, signal level spacing technique is investigated in this paper. The 3LCDM performance is improved considerably using both electrical and optical level spacing optimization configurations. The results demonstrate that by optimization, in conditions of the optical signal-to-noise ratio, an improvement of around 4.5 dB can be achieved in both approaches as well as 3.3 dB in the electrical configuration and 3.5 dB in the optical configuration can be accomplished for the 3LCDM in terms of the receiver sensitivity.     

Layer-by-Layer Electrochemical Assembly of Pt/Phosphomolybdic Acid/Poly(diphenylamine)/PGE for Electrocatalytic Oxidation of Methanol

Journal of Electronic Materials - In this work, a layer-by-layer (LbL) electrochemical assembly was fabricated comprising alternating layers of poly(diphenylamine) (PDPA), phosphomolybdic acid...     

Duty-cycle division multiplexing (DCDM)

A multiplexing technique, which is based on duty-cycle division, is proposed. The channel multiplexing and demultiplexing are performed electrically at the single user bit rate, which is very economic. In a three-user system (3×10 Gb/s), the simulation results show that the best receiver sensitivity value achieved is −30.1 dBm with an optical signal-to-noise ratio (OSNR) of 22.3 dB, while the chromatic dispersion tolerance ranges from 192 to 280 ps/nm. Migration from 30 to 120 Gb/s is achieved with the penalty of 6.4 and 5.2 dB in the receiver sensitivity and OSNR, respectively, for the worst user.     

The effect of nonlinear gain on the characteristics of an optically injected VCSEL and cavity solitons

Using the Lagrange method to fit the curve of maximum gain as a function of carrier density for an active region consisting of an AlGaAs/GaAs layers sandwiched between DBR layers, it is found that the curve is better approximated assuming a quadratic dependence on the carrier density. By summarizing all of the calculations into a nonlinear gain coefficient parameter, $\beta $ , in the Maxwell–Bloch equations we numerically studied the effect of nonlinear gain on the characteristics of the VCSEL and also on the cavity solitons (CSs) forming in such a device. Particularly, it is shown that with nonlinear gain a wider locked region can be achieved along with enhanced sustained relaxation oscillation amplitude. The switching on/off time of CSs is modified and there appears a considerable enhancement in their efficiency and contrast.     

Duty-cycle-division-multiplexing: Bit error rate estimation and performance evaluation

An improved estimation of bit-error-rate (BER) for electrically multiplexed duty-cycle division multiplexing (E-DCDM), which is based on the probability of error, is presented. Performance of 3 × 10 Gbit/s E-DCDM is investigated in terms of optical signal-to-noise ratio (OSNR) and dispersion tolerance. This technique requires 29.4 dB OSNR and can tolerate ±96 ps/nm chromatic dispersion for the worst user.