Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

RED gateway congestion control using median queue size estimates

This paper focuses on the queue size estimation problem in random early detection (RED) gateways. Queue size estimation plays a fundamental role in the congestion control dynamics of RED, as it determines gateways' awareness of network congestion, which in turn determines the packet dropping/marking decision. Conventional RED gateways use exponentially weighted moving averages (EWMA) to estimate the queue size. These infinite impulse response (IIR) filters require very small EWMA weights in order to effectively avoid nonlinear instabilities in RED and to filter out bursty increases in the queue size. While small EWMA weights enable gateways to accommodate transient congestion, they also lead to gateways' failure to closely track rapid queue size depletion and thus causes link under utilization. We investigate the use of simple nonlinear queue size estimators. In particular, we study the congestion control dynamics of a network where adaptive weighted median filters are used for queue size estimation by the gateways. Analytical results for the expected queue size in the steady state are derived. Under this new queue size estimation framework, design guidelines for the remaining RED parameters are provided. Simulation results show that the proposed algorithm provides greater network power, better prevention of global synchronization, and a fairer treatment to bursty traffic than the RED algorithm does.     

N. Charton,A. Feldermann,A. Theis,M. H. Stenzel,T. P. Davis,C. Barner‐Kowollik,Initiator efficiency of 2,2′‐azobis(isobutyronitrile) in bulk dodecyl acrylate free‐radical polymerizations over a wide conversion and molecular weight range (2004) 42(20) 5170–5179

The original article to which this Erratum refers was published in J Polym Sci Part A: Polym Chem (2004) 42(20) 5170–5179. No abstract.     

A Linear Phase Condition for Volterra Filters

In linear finite-impulse-response filter design, it is desirable that the filter frequency response has linear phase (LP). In this brief, we investigate the LP concept for nonlinear Volterra filters. The LP condition of Volterra filters is defined in terms of its output spectrum in which the phase term introduced by the Volterra kernels is linear. It is shown that under certain symmetry conditions, the LP condition is satisfied by Volterra filters. Moreover, the LP condition for Volterra filters can be considered as an extension to the linear filter case.     

Zur Konfiguration des Vitamin-D3-Metaboliten 25, 26-Dihydroxycholecalciferol: Synthese von (25S,26)- und (25R,26)-Dihydroxycholecalciferol

Configuration of the Vitamin-D₃-Metabolite 25,26-Dihydroxycholecalciferol: Synthesis of (25S,26)- and (25R,26)-Dihydroxycholecalciferol For selective synthesis of the title compounds, (25S)- 1b and (25R)- 1b (Scheme 1), the protected cholesterol precursors (25S)- 6 and (25R)- 6 were prepared from stigmasterol-derived steroid-units 4a-d and C₅-side chain building blocks 5a–d by Grignard- or Wittig-coupling (Scheme 2), the configuration at C(25) of the target compounds being already present in the C₅-units. Conversion of the cholesterol intermediates to the corresponding vitamin-D₃ derivatives was carried out via the 7,8-didehydrocholesterol compounds (25S)- 2b and (25R)- 2b (Scheme 1), using the established photochemical-thermal transformation of the 5,7-diene system to the seco-triene system of cholecalciferol. The configuration at C(25) of the cholesterol precursors as assigned on basis of the known configuration of the C₅-units used, was found to be in agreement with the result of a single crystal X-ray analysis on compound 11 . The configuration at C(25) remained untouched on conversion of the cholesterol ring system to the seco-triene system of vitamin D₃ as evident from comparison of the lanthanide-induced CD. Cotton effects observed for (25S)- 3b and (25S) 1b . 25,26-Dihydroxycholecalciferol observed as a natural vitamin-D₃ metabolite has (25S)-configuration.     

Totalsynthese von natürlichem α-Tocopherol. 2. Mitteilung. Aufbau der Seitenkette aus (−)-(S)-3-Methyl-γ-butyrolacton

Total Synthesis of Natural α-Tocopherol A short and efficient route to optically pure (+)-(3 R, 7 R)-trimethyldodecanol ( 14 ) is demonstrated, 14 serving as side chain unit in the preparation of natural vitamin E. The synthesis of 14 is based on the concept of using a single optically active C₅-synthon of suitable configuration and functionalization to introduce both asymmetric centres in 14 . (?)-(S)-3-Methyl-γ-butyrolacton ( 1 ) and ethyl (?)-(S)-4-bromo-3-methylbutyrate ( 2 ), respectively, is used in a sequence of either two Grignard C,C-coupling reactions 5 → 8 and 12 → 13 or two Wittig reactions 17a → 18 and 20 → 21 to achieve this goal. 14 is converted to (2 R, 4′R, 8′R)-α-tocopherol (= vitamin E) by coupling with a chroman unit in known manner. Optical purity of products and intermediates is established.     

Infrared and Raman spectroscopic investigations of the Nb(V) fluoro and oxofluoro complexes in the LiF-NaF-KF eutectic melt with development of a diamond IR cell

A vacuum-tight cell for infrared spectroscopic investigations of extremely corrosive melts, e.g., molten fluorides, has been constructed and tested up to 750 degrees C. The cell has a gold-lined sample chamber and a diamond window transparent for the infrared light. It can be furnished with a gold piston that enables the recording of short-path-length FTIR spectra of liquid samples. Solutions of Nb(V) in LiF-NaF-KF eutectic (FLINAK) with and without oxide additions have been investigated by FTIR and Raman spectroscopy. The presence of NbF7(2-), NbOF5(2-), and NbO2F4(3-) complexes was established in the molten state at 600 degrees C. After solidification NbF7(2-) was still the only Nb(V) all-fluoro complex present. Three oxofluoro complexes, NbOF6(3-), NbOF5(2-), and NbO2F4(3-), have been identified in the solid state. Typical frequency regions for the different complexes are established. Finally, it was shown that K2NbF7 can be used as an indicator to determine the oxide content of the sample melts.     

Electrochemical and spectroscopic studies of the chloro and oxochloro complex formation of Nb(V) and Ta(V) in NaCl-AlCl3 melts

The equilibrium constant for the chloro complex formation of Nb(V) NbCl6-<--->NbCl5+Cl- (i) in NaCl-AlCl3 melts at 175 degrees C was found to be pKi = 2.86(5). The oxochloro complex formation of Nb(V) and Ta(V) in NaCl-AlCl3 melts at 175 degrees C could be explained by the following equilibria: MOCl4- <-->MOCl3+Cl- (ii) MOCl3<-->MOCl2(+)+Cl- (iii) where M = Nb and Ta. The equilibrium constants determined by potentiometric measurements with chlorine-chloride electrodes were, for M = Nb, pKii = 2.21(4) and pKiii = 3.95(5) and, for M = Ta, pKii = 2.743(15) and pKiii = 4.521(13). NbCl6- has two bands in the UV-vis region, a strong one at 34.7 x 10(3) cm-1 and a weaker one at 41.6 x 10(3) cm-1. The MOCl4- complexes showed in the case of Nb(V) absorption bands at 32.7 and 42.9 x 10(3) cm-1 and in the case of Ta(V) at 38.6 and 48.1 x 10(3) cm-1.