二极管侧面抽运薄片激光器耦合系统研究

设计了二极管侧面抽运Nd:YAG薄片激光器,耦合系统由消像差透镜组和空心光波导组成,对二极管快轴和慢轴方向的抽运光进行压缩和均匀化.采用光线追迹法,同时考虑二极管在快轴和慢轴方向的发散特性及薄片侧面的散射特性,模拟并分析了光线在耦合系统内的传输和薄片内抽运光分布的规律.模拟结果表明耦合系统具有98.1%的耦合效率,同时薄片内具有理想的抽运光分布.     

用频谱仪检修数字电视故障3例

故障现象一：某小区所有用户都收不到第3个数据包的数字电视信号,而其他数据包的数字电视信号正常。     

Characterization of ZnO:AI films deposited by r.f.magnetron-sputtering at low temperature

Transparent conducting ZnO:AI thin films with good adhesion and Iow resistivity have been prepared on organic substrates and Coming 7059 glass substrates by r.f. magnetron-sputtering technique at Iow substrate temperature (25-210℃). Structural and photoelectric properties of the deposited films are investigated. The deposited films are polycrystalline with hexagonal structure and a preferred orientation with the c-axis perpendicular to the substrate. Only the (002) peak is observed.High quality films with resistivity as Iow as 1.0 x 10- 3Ω@ cm and 8.4 x 10- 4Ω@ cm, the average transmittance over 74% and 85% in the wavelength range of the visible spectrum have been obtained on different substrates.     

Conservation Laws in sine—Gordon Equation

There are two conservation quantities needed to derive conservation laws of sine-Gordon equation in a frame of laboratory reference.one of them could be derived easily with a standard process,but the other could not .After the gauge transformation e^-iθσ2/2is introduced,we simply obtain the other one without any questionable assumption.     

下一代高速网络中的QOS路由选择

路由是网络支持多媒体业务的关键技术之一，QOS(Quality of Service)路由选择的目的是要选择一条具有足够资源满足对某些度量标准的限制条件的路径。路由选择可以分为单播路由选择和多播路由选择两种，其又包含了三种具体的策略：源端路由选择、分布式路由选择和分级路由选择。本文将具体的讨论QOS路由选择的基本问题和基本策略。     

平台石墨炉原子吸收测磷的方法研究

研究了平台石墨炉原子吸收测定磷的方法,表明以氯化钯和硝酸钙的混合液作为基体改进剂测定生物样品中的磷效果最好,方法特征量为8×10~(-9)g,工作曲线线性范围为0～0.400吸光度,精密度好,抗干扰能力强,方法简单,利用标准曲线即可测定生物样品中磷。     

主从JK触发器时序分析的简单方法

主从JK触发器存在一次变化问题,即在CP信号为1期间,无论J、K信号如何变化,主触发器只发生一次变化。只有定出主触发器这一次变化变成什么状态,才能得出从触发器在CP下降到了之后翻成的状态。按以往的授课方法,我们往往通过先分析主从JK触发器的电路结构,分析出一次变化的结果,然后再推出CP的下降沿到来时从触发器的次态。这样分析显得繁琐。本人通过仔细推敲,觉得将JK触发器的功能表(表1)改为表2所表示的逻辑关系,即将表1中“0”改为“恒0”,表1中“1”改为“有1”,则可利用JK触发器功能表来分析触发器的状态转换情况。这对分析JK触发器时序关系带来了极大的方便,在教学过程中也收到很好的效果。     

Design of new seismometer based on laser Doppler effect

In order to improve the resolution of seismic acquisition,a new seismic acquisition system based on tangential laser Doppler effect with an optimized differential optical configuration is proposed.The relative movement of the inertia object and the immobile frame is measured by laser Doppler effect,which can avoid the electromagnetic and thermometric interference,and the adoption of frequency-modulated (FM) transmission can improve the ability of anti-jamming.The frequency bandwidth is properly determined by analyzing the frequency of the Doppler signal.The velocity, displacement,acceleration, and frequency to be measured can be real-time acquired by frequency/velocity (F/V) converting the FM Doppler signal. A 100-dB dynamic range and the linear frequency range of 1.0 to 1000 Hz are realized.