Zn(BTZ)2白色有机电致发光材料的合成及其器件制备

以PCl₃为脱水剂,将邻氨基硫酚与水杨酸脱水环化合成出2-(2-羟基苯基)苯并噻唑,并进一步将所得产物与乙酸锌反应合成出2-(2-羟基苯基)苯并噻唑螯合锌(Zn(BTZ)₂)材料。以该配合物作为发光层制备出结构为ITO/PVK:TPD/Zn(BTZ)₂/Al近白色电致发光器件,其色坐标位于白场之内(x=0.242,y=0.359),在驱动电压为16V时,亮度达3200cdm²,对应的量子效率为0.32%。进一步在Zn(BTZ)₂中掺入橙红色染料Rubrene,制成ITO/PVK:TPD/Zn(BTZ)₂:Rubrene/Al结构器件,实现了纯白色发光(色坐标值:x=0.324,y=0.343),非常接近于白色等能点,且量子效率达0.47%。最后对上述器件的发光和电学性能进行了深入的研究和探讨。     

猴头菇微量元素含量的分析

用电感耦合等离子体发射光谱仪（ICP-AES）测定了湛江市栽培的猴头茹微量元素的含量，发现其磷、硫、钙、镁、锌、铁、铜等元素的含量都比较丰富，并讨论了这些有益元素与人体健康的关系。     

Dynamics of end-grafted polystyrene brushes in theta solvents

The dynamics of the concentration fluctuations in end-grafted polystyrene brushes in a theta solvent (cyclohexane) are probed by evanescent wave dynamic light scattering at different wavevectors q and temperatures. When the solvent quality changes from marginal to poor, the relaxation function C(q, t) exhibits strong effects as compared with the smooth variation of the brush density profile. From a single exponential above 50 °C, C(q, t) becomes a two-step decay function. The fast decay is still assigned to the cooperative diffusion albeit slower than in the good solvent regime whereas the slow nonexponential and nondiffusive process might relate to microsegragated and/or chain dynamics in the present polydisperse brush. The relaxation function of the present three brushes with different grafting density reveals similarities and disparities between wet brushes and semidilute polymer solutions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3590–3597, 2006     

Azobenzene-containing polyamic acid with excellent Langmuir-Blodgett-Kuhn film formation behavior suitable for all-optical switching

To generate command surfaces for all-optical switching, highly ordered polymeric Langmuir-Blodgett-Kuhn (LBK) multilayers were fabricated onto silicon substrates and gold-coated optical glass slides from novel azobenzene-bearing polyamic acid systems. Pronounced Bragg peaks and well-defined Kiessig fringes observed in the X-ray reflectivity measurement for samples on silicon substrates indicate that these films possess a regularly repeated Y-type LBK multilayer structure and ultrasmooth surfaces. Fourier transform infrared (FT-IR) spectra taken by grazing incidence reflection suggest specific orientations of the functional groups in the layers. The excellent film-forming properties of the polyamic acid allow for a smooth buildup of several hundreds of layers of the LBK films onto gold-coated glass slides, which in turn allows for determining the geometrical thickness and the anisotropic refractive indices of the films by using optical waveguide spectroscopy. Interestingly, the probe laser beam induced a distinct fluorescence signal from the films, which remained even after the film underwent a thermal imidization process at 160 degrees C for 8 h in vacuo. LBK films fabricated from these compounds can be successfully applied for all-optically switching the alignment of liquid crystals by irradiation with light of different wavelengths.     

催化裂解-金汞齐富集-冷原子吸收光谱仪测定土壤样品中总汞含量

为避免汞消解过程中产生的蒸发损失及前处理过程中产生器具与样品污染,通过配制汞总量为0～2、0～15和25～1 023 ng的三种不同汞浓度系列的标准工作曲线,选取9个土壤样品、3种国家土壤有证标准物质,同一样品分别进行6组平行测定,并抽取3个土壤样品进行3种不同浓度加标回收实验,以对其方法精密度和准确度进行论证,建立了催化裂解-金汞齐富集-冷原子吸收光谱法即直接测汞仪测定土壤样品中汞含量的方法。结果显示,仪器信号值与Hg总量之间均呈良好的线性关系。根据仪器多次测定空白数据结果,按照称样量0.1 g计算,方法检出为0.09 ng/g;平行测定结果相对标准偏差均小于10%,土壤标准物质测定值与参考值均相符,不同浓度的加标回收率范围为69.0%～97.0%。方法可用于批量土壤样品中汞含量的快速测定,精密度和准确度可满足测定要求,且实验过程中无需前处理消解,操作方便、快速高效。     

MoO3/SiO2催化剂的异丁烷选择氧化反应性能

分别采用浸渍法和溶胶－凝胶法制备了MoO3/SiO2催化剂，用XRD，TPR，IR，TPD和活性评价等手段对催化剂的影响，晶格氧活泼性，化学吸附性能和异丁烷选择氧化反应性能进行了研究。结果表明，催化剂表面由Lewis碱位Mo=M,Mo-O-Mo中的晶格氧和Lewis酸位Mo^6 构成，在MoO3/SiO2催化剂上，异丁烷主要通过甲基的H双位吸附在表面的Lewis碱位Mo=O上；在常压条件下，异丁烷选择氧化产物主要为异丁烷，甲基丙烯醛和甲基丙烯酸，其中深度氧化产物CO2主要由吸附的异丁烯继续反应生成；采用溶胶－凝胶法制备的MoO3/SiO2催化剂，可得到较高的异丁烷转化率和含氧有机物选择性。     

Ti2(OMe)4/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换法制备了SiO2负载的Ti2(OMe)4双核桥联配合物催化剂，用IR、TPD和微反技术考察了催化剂的表面构造及CO2和CH3OH在催化剂表面上的化学吸附和反应性能。结果表明：双核桥联配合物Ti2(OMe)4以Ti-O-Si键锚定在SiO2表面上；CO2在催化剂表面存在桥式和甲氧碳酸酯基两种吸附态，其中甲氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态。在150℃以下，CO2和CH3OH在Ti2(OMe)4/SiO2催化剂表面上高选择地生成碳酸二甲酯。     

石墨消解-电感耦合等离子体质谱(ICP-MS)法测定铜精矿中汞的含量

称取0.2g样品于50mL样品管中,以5mL硝酸-盐酸(1∶1)混合溶液为溶剂,采用石墨消解仪对样品进行前处理。以159 Tb作内标元素补偿基体效应,用电感耦合等离子体质谱(ICP-MS)法对铜精矿中的202 Hg进行测定。结果显示,在0～50μg/L的浓度范围内,校准曲线线性相关系数在0.999 9以上,方法检出限0.019μg/L。对铜精矿标准样品的检测结果与标准值相符。铜精矿中汞的浓度在0.94～15.06μg/g时,与直接测汞仪检测结果对比基本一致。     

Grafting of PMMA brushes on titania nanoparticulate surface via surface-initiated conventional radical and “controlled” radical polymerization (ATRP)

Stable dispersion of titania nanoparticles in organic solvents are obtained by grafting poly(methyl methacrylate) layer on to the surface. Titania nanoparticles are synthesized through the hydrolysis of titanium (IV) isopropoxide. The average size of the titania particles is found to be 15 ± 2 nm. The polymer layer was introduced onto the surface by immobilizing the initiating moiety. Azo initiator moiety required for surface-initiated conventional free radical polymerization and a tertiary bromide initiator moiety required for ATRP are attached covalently to the titania nanoparticulate surface through the surface hydroxyl groups. The “encapsulation” of PMMA layer results in the steric stabilization of the titania nanoparticles. Another important finding is that it is possible to grow polymer layer in a controlled fashion.     

Ueber Untersuchung von Jodoform und Jod enthaltenden Verbandstoffen und Arzneimitteln

Ohne Zusammenfassung