All solid-state sum-frequency generation of 1.12-W continuous-wave laser at 588 nm

A new resonator design for doubly resonant continuous-wave (CW) intracavity sum-frequency mixing (SFM) is reported. 1.12 W of coherent radiation at 588 nm is generated by mixing 1062-nm Nd:GdVO4laser and 1319-nm Nd:YAG laser. The optical-to-optical conversion efficiency is up to 3.7%.     

Rapid separation and characterization of diterpenoid alkaloids in processed roots of Aconitum carmichaeli using ultra high performance liquid chromatography coupled with hybrid linear ion trap‐Orbitrap tandem mass spectrometry

The lateral root of Aconitum carmichaeli, a popular traditional Chinese medicine, has been widely used to treat rheumatic diseases. For decades, diterpenoid alkaloids have dominated the phytochemical and biomedical research on this plant. In this study, a rapid and sensitive method based on ultra high performance liquid chromatography coupled with linear ion trap‐Orbitrap tandem mass spectrometry was developed to characterize the diterpenoid alkaloids in Aconitum carmichaeli. Based on an optimized chromatographic condition, more than 120 diterpenoid alkaloids were separated with good resolution. Using a systematic strategy that combines high resolution separation, highly accurate mass measurements and a good understanding of the diagnostic fragment‐based fragmentation patterns, these diterpenoid alkaloids were identified or tentatively identified. The identification of these chemicals provided essential data for further phytochemical studies and toxicity research of Aconitum carmichaeli. Moreover, the ultra high performance liquid chromatography with linear ion trap‐Orbitrap mass spectrometry platform was an effective and accurate tool for rapid qualitative analysis of secondary metabolite productions from natural resources.     

Single‐Molecule Sensing of Environmental pH—an STM Break Junction and NEGF‐DFT Approach

Sensors play a significant role in the detection of toxic species and explosives, and in the remote control of chemical processes. In this work, we report a single‐molecule‐based pH switch/sensor that exploits the sensitivity of dye molecules to environmental pH to build metal–molecule–metal (m‐M‐m) devices using the scanning tunneling microscopy (STM) break junction technique. Dyes undergo pH‐induced electronic modulation due to reversible structural transformation between a conjugated and a nonconjugated form, resulting in a change in the HOMO–LUMO gap. The dye‐mediated m‐M‐m devices react to environmental pH with a high on/off ratio (≈100:1) of device conductivity. Density functional theory (DFT) calculations, carried out under the non‐equilibrium Green’s function (NEGF) framework, model charge transport through these molecules in the two possible forms and confirm that the HOMO–LUMO gap of dyes is nearly twice as large in the nonconjugated form as in the conjugated form.     

Orientation‐Controlled Single‐Molecule Junctions

The conductivity of a single aromatic ring, perpendicular to its plane, is determined using a new strategy under ambient conditions and at room temperature by a combination of molecular assembly, scanning tunneling microscopy (STM) imaging, and STM break junction (STM‐BJ) techniques. The construction of such molecular junctions exploits the formation of highly ordered structures of flat‐oriented mesitylene molecules on Au(111) to enable direct tip/π contacts, a result that is not possible by conventional methods. The measured conductance of Au/π/Au junction is about 0.1 G_o , two orders of magnitude higher than the conductance of phenyl rings connected to the electrodes by standard anchoring groups. Our experiments suggest that long‐range ordered structures, which hold the aromatic ring in place and parallel to the surface, are essential to increase probability of the formation of orientation‐controlled molecular junctions.     

环形光纤声发射传感器的相位调制特性研究

提出了一种基于光纤Sagnac干涉仪的环形传感器,用于固体表面传播的超声波的检测.这种传感器的特点是能够精确地检测由固体表面传播的超声波产生的微弱振动.当超声波信号通过光纤传感器的两个臂到达探测器时,干涉仪的输出光强度受到了超声信号的调制.通过检测干涉仪的输出光强度并利用Fourier变换,测得了超声信号的振幅和频率.而且对传感系统的位相调制特性进行了仿真,并对实验结果进行了分析,结果表明该系统可用于固体表面传播的超声波频率特征的识别.     

双涂层光纤应变传感器的理论与实验研究

对带有聚合物涂敷层和缓冲层的光纤应变传感器的力学特性进行了研究,建立了双涂层光纤与基体材料相互作用的线弹性理论模型.理论研究表明：在小半径近似条件下,双涂层光纤的力学传递特性决定于涂覆层和缓冲层的弹性模量的相对值;当缓冲层的弹性模量远大于涂覆层时,其作用可忽略.实验中,将光纤传感器埋入基体材料内部,利用白光干涉应变测量方法,对平均应变传递系数进行了实验研究.实验结果与理论仿真具有较好的一致性.     

荧光光纤光栅传感特性的实验研究

在载氢掺铒光纤上写入Bragg光纤光栅,得到新型光子学器件-荧光光纤光栅.分别对其Bragg波长（λB）及荧光寿命（τ）的温度（T）及应变（ε）响应特性进行了实验研究,并且给出了λB和τ分别关于（T,ε）的拟合方程.实验结果表明：荧光光纤光栅的λB对T和ε的响应具备一般Bragg光纤光栅的优良特性,测得温度灵敏度为11.1pm /℃,应变灵敏度为1.19pm/με;而且τ对T和ε的响应也具有良好的线性关系,温度灵敏度为0.59 μs/℃,应变灵敏度为6.16 ns/με.实验结论为解决温度应力交叉敏感、实现温度应力的同时监测提供一条新颖的途径.     

一种加成固化型热固性树脂PN-PAA固化过程和热稳定性研究

研究了炔丙基醚化酚醛树脂(PN)与聚芳基乙炔树脂(PAA)的反应性共混物(以下简称PN-PAA共混树脂)的相容性,并对共混树脂的固化过程和固化物的耐热性进行了表征.相态、DSC、SEM、TEM等测试结果均表明共混树脂及其固化物是完全相容的均相体系.凝胶时间、粘度、DSC等结果表明共混树脂固化工艺性优良,适合多种成型工艺(如RTM),显著改善了PAA树脂的固化工艺缺陷.DMA、TGA等分析表明共混树脂固化物具有很高的耐热性,可作为新型的防热复合材料和高温结构材料的基体.