基于小波包分析及支持向量机的超音速目标识别方法研究

提出了基于小波包分析及支持向量机的超音速目标识别方法 .通过 5 .5 6mm ,7.6 2mm和 12 .7mm三种枪弹试验获取信号 ,用小波包分解激波信号 ,统计每个频带的能量特征 ,用支持向量机方法训练测试样本 ,获得了很好的分类效果 .仿真结果表明基于超音速飞行体产生的激波信号来识别目标是可行的 .     

锕系多重键金属有机化合物研究进展

多重键金属有机化合物在多种催化反应中已经得到广泛的应用, 并取得了很好的研究成果. 目前, 多重键金属有机化合物的研究已成为催化化学领域中一个引人注目的研究热点. 综述了锕系多重键金属有机化合物的研究进展. 根据化合物多重键的不同, 分别讨论了它们的合成及反应性能, 并定性讨论了多重键的性质.     

Effect of various irradiation doses on some nutrients of Pakistani date

Summary Date samples were irradiated with different doses using a gamma-irradiator. Levels of moisture, protein, fibre and fats were determined on monthly basis for 5 months. Generally, the moisture contents of control date samples packed in white polythene decreased from 14.1±1.1 to 9.7±0.8% over a 5-month period while the irradiated samples were in the range of 10.4-11.2%, however, no proper pattern of change was observed. After 5-month storage, the protein level of irradiated samples was reduced to 1.00-1.30%, while the percent fibre levels were found to be in the range of 2.40-2.48. Similarly, the fat level decreases from 1.06±0.12 to 0.68±0.06 for control date sample while after 5-month the decrease in fat content was 0.45±0.04%, 0.44±0.04%, 0.44±0.05%, 0.42±0.05% and 0.40±0.04% for samples irradiated with 20, 50, 100, 200 and 300 krads, respectively.     

Neutron induced radiography in the determination of boron in drinking water

Neutron induced radiography has been applied to the determination of boron concentrations in drinking water, collected from natural springs of Reshian and Muzaffarabad areas of Azad Kashmir, Pakistan, using CR-39 etched track detectors. The technique is based upon the simultaneous irradiation with thermal neutrons of a sample of unknown concentration and a standard of known boron concentration, fixed on a track detector. The subsequent counting of alpha and ⁷Li tracks in the detector resulting from the ¹⁰B(n,)⁷Li nuclear reaction is done after chemical etching. Boron concentration in the sample is determined by comparing ⁷Li and alpha-particle track density with that of a standard of known boron concentration. Boron concentrations in drinking water samples from Muzaffarabad and Reshian area of Azad Kashmir have been found to vary from (0.054±0.001) mg/l to (0.250±0.004) mg/l with an average of (0.16±0.002) mg/l. The observed concentration of boron in drinking water has been found to be less than the provisional Maximum Acceptable Concentration level (0.4 mg//l) of WHO. The drinking water from the reported area has been found to be within safe limits as far as boron related health hazards are concerned.This revised version was published online in November 2005 with corrections to the Cover Date.     

EAST新型下偏滤器冷却结构 传热性能数值模拟

为实现EAST装置超400s长脉冲高约束模、10MW加热功率下的稳态运行，需对现有的下碳偏滤器进行升级改造，拟采用钨串结极水冷却系统，热通量控制在水冷钨铜第一壁材料允许的稳态的10MW·m^-2。在对下钨偏滤器的冷却结极传热性能进行数值模拟仿真研究的基础上，研究了多种以钨串单元为基础的冷却结极，提出了一种新型下钨偏滤器水冷结极设计，幵建立了满足传热要求的EAST装置新型下钨偏滤器单元结构模型。     

峨山褐煤的分子结构和分子模拟

作为重要的化石能源，褐煤资源潜力巨大、分布广泛但综合利用率低。研究褐煤的分子结构模型，有助于预测褐煤在热解、液化和气化过程中的化学反应机理及反应路径，进而提高褐煤的综合应用水平。以云南峨山褐煤为研究对象，利用傅里叶变换红外光谱、13C核磁共振波谱及X射线光电子能谱等分析测试方法，获取了峨山褐煤的含碳、含氧及含氮结构参数。在此基础上，借助Gaussian 09计算平台，采用量子化学建模的方法构建并优化了峨山褐煤的分子结构模型。研究结果表明：峨山褐煤的芳碳率为39.20%，芳香碳结构主要为苯和萘，且芳香桥头碳与周边碳的比值χ_b为0.07；脂碳率为49.51%，脂肪碳结构主要为亚甲基，季碳和氧接脂碳；氧原子主要存在于羟基、醚氧、羰基和羧基结构中；含氮结构则以吡啶为主。基于元素分析、13C 核磁共振波谱分析，又经过热重实验消除褐煤中残余水分的影响后，计算出峨山褐煤的分子式为C₁₅₃H₁₃₇O₃₅N₂。依据分子式及分析结果计算出峨山褐煤的结构单元含量并构建出其初始结构模型，采用半经验法PM 3基组及密度泛函理论M06-2X/3-21G基组对初始分子构型进行优化。优化后的分子模型具有明显的三维立体特征，芳香环之间较为分散且在空间中排列不规则，芳香簇主要通过亚甲基、醚氧基、羰基、酯基和脂肪环连接，含氧官能团主要分布在分子边缘，脂肪族侧链较多。对优化后的分子模型进行振动频率计算进而获得了分子模型的模拟红外光谱，其与实验红外谱图吻合度良好，证明了峨山褐煤分子结构模型的准确性、合理性。分子结构模型的构建有利于直观地了解峨山褐煤的分子结构特征，从而有助于从微观分子角度研究峨山褐煤的宏观性质。同时，峨山褐煤分子结构模型可为其在热解、液化和气化等领域研究中提供理论指导。     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.     

Pd@SiO2/Al2O3的制备及其催化氧化CO性能评价

从Pd纳米粒子出发制备具有核壳结构的Pd@SiO₂纳米粒子,并将其负载于不同形貌Al₂O₃载体上,制备出具有良好CO催化氧化活性的催化剂。以纳米球形Al₂O₃为载体时,Pd@SiO₂/Al₂O₃催化剂活性优于无核壳结构的Pd/Al₂O₃催化剂。将纳米Pd@SiO₂负载到球形和菱形Al₂O₃上,制备出Pd@SiO₂/Al₂O₃催化剂。结果表明:具有较大比表面积的Al₂O₃载体(球形)有利于Pd@SiO₂的分散,且SiO₂层可以抑制Pd粒子的团聚,能在一定程度上改善催化活性。而较小比表面积的载体(菱形)上出现了Pd@SiO₂的团聚,表现出较低的CO氧化活性,但在降低负载量后,CO氧化活性明显提高。该结果为推动新型热稳定、高效纳米三效催化剂的研发具有一定的启示意义。     

聚L-谷氨酸苄酯固定相的制备及色谱评价

利用L-谷氨酸苄酯开环聚合得到聚L-谷氨酸苄酯,对其进行表征,将聚L-谷氨酸苄酯溶于四氢呋喃后涂敷在3-氨丙基三乙氧基硅胶上制得液相色谱固定相,研究了正相色谱条件下聚L-谷氨酸苄酯涂敷型固定相对9种位置异构体及10种手性化合物的拆分能力。以不同比例的正己烷/异丙醇为流动相,有6种位置异构体(o,m,p-氯苯胺、o,m,p-溴苯胺、o,m,p-碘苯胺、o,m,p-硝基苯胺、o,m,p-二硝基苯和o,m,p-苯二胺)和4种手性化合物(1-(对氯苯基)乙醇、5-二硝基-N-(1-苯乙基)苯甲酰胺、华法林和四咪唑)得到不同程度的拆分,表明聚L-谷氨酸苄酯涂敷型固定相对位置异构体具有较好的识别作用,同时也表现出良好的手性拆分能力。