Distributions of major-to-ultratrace elements among the particulate and dissolved fractions in natural water as studied by ICP-AES and ICP-MS after sequential fractionation.

In order to elucidate the distributions of the elements among the particulate and dissolved fractions in pond water, major-to-ultratrace elements in different sizes of particles as well as in the filtrate passed through the 0.05 microm filter were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The different sizes of particle samples (ca. 100-300 microg each) were collected on the membrane filters with pore sizes of 10, 3.0, 1.2, 0.4, 0.2 and 0.05 microm, respectively, by sequential fractionation. As a result, about 40 elements in different sizes of particles could be determined by ICP-AES and ICP-MS, after acid digestion using HNO3/HF/HClO4. Then, the fractional distribution factors of major-to-ultratrace elements among the particulate and dissolved fractions were estimated from the analytical results. The total contents of Al, Fe, Ti, REEs (rare earth elements), Bi, Pb and Ag in the particulate fractions (larger than 0.05 microm) were more than 80-90%, while those of Ca, Sr, Cs, W, Ba, Mn and Co in the dissolved fraction, which corresponded to the filtrate passed through the 0.05 microm membrane filter, were more than 80%. It was further found that the fractional distributions of Cu and Zn in the dissolved fraction were ca. 50%. In addition, the enrichment factors (EFs) of the elements in the particulate fractions with particle sizes of 3.0-10 microm and 0.05-0.2 microm were estimated to elucidate their geochemical characteristics in natural water.     

An enrichment method of molybdenum on a cellulose nitrate resin for the determination by electrothermal atomic absorption spectrometry coupled with the resin suspension injection.

Cellulose derivative resin (CDR) suspensions containing resin particles of cellulose nitrate (CDR(CN)), cellulose acetate (CDR(CA)), or cellulose triacetate (CDR(CTA)) were prepared as the sorbent for resin suspension injection (RSI) electrothermal atomic absorption spectrometry (ETAAS), in which fine resin particles holding a desired trace element were directly injected into the graphite tube as the suspension. To compare the sorption ability, the distribution ratios of the Mo(VI)-phenylfluorone complex were measured between the aqueous phase and the sorbents, including the CDRs mentioned above and the finely divided anion exchange resin (AR). The results showed that the sorption ability decreases in the following order: CDR(CN) > or = AR > CDR(CA) > or = CDR(CTA). It was concluded that CDR(CN) was able to extract more than 98% of Mo(VI), and was suitable for RSI-ETAAS as well as AR. CDR(CN) was used for the determination of Mo in NIES certified reference materials, No. 10 Rice flour-unpolished; the results showed fairly good agreements between the analytical values and the certified values.     

Utilization of carbohydrates by radiation processing

Upgrading and utilization of carbohydrates such as chitosan, sodium alginate, carrageenan, cellulose, pectin have been investigated for recycling these bio-resources and reducing the environmental pollution. These carbohydrates were easily degraded by irradiation and various kinds of biological activities such as anti-microbial activity, promotion of plant growth, suppression of heavy metal stress, phytoalexins induction, etc. were induced. On the other hand, some carbohydrate derivatives, carboxymethylcellulose and carboxymethylstarch, could be crosslinked under certain radiation condition and produce the biodegradable hydrogel for medical and agricultural use.     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

Optical and electric properties of Nb-doped anatase TiO2 single crystal

Nb-doped anatase TiO₂ single crystal has been grown by chemical vapour transport method. Raman spectra shows that the obtained crystal with Nb of 0.08 wt% has typical anatase structure. An absorption band was observed at around 2.2 eV, which seems to be due to the d-d transition in the conduction band. The electron paramagnetic resonance and electric resistivity measurements show that the doped niobium makes quite shallow donor level whose orbital is d_xy-like centered at the titanium position of anatase.     

A new method for the synthesis of 1,3-oxathiolan-2-ones by the reaction of epoxides with sulfur and carbon monoxide

The convenient method for the synthesis of 1,3-oxathiolan-2-ones by the reaction of epoxides with elemental sulfur and carbon monoxide in the presence of catalytic amount of sodium hydride has been developed.     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

Synthesis of well‐defined syndiotactic poly(methyl methacrylate) with low‐temperature atom transfer radical polymerization in fluoroalcohol

The copper‐mediated atom transfer radical polymerization of methyl methacrylate (MMA) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied to simultaneously control the molecular weight and tacticity. The polymerization using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as a ligand was performed even at ?78°C with a number‐average molecular weight (M_n) of 13,400 and a polydispersity (weight‐average molecular weight/number‐average molecular weight) of 1.31, although the measured M_n's were much higher than the theoretical ones. The addition of copper(II) bromide (CuBr₂) apparently affected the early stage of the polymerization; that is, the polymerization could proceed in a controlled manner under the condition of [MMA]₀/[methyl α‐bromoisobutyrate]₀/[CuBr]₀/[CuBr₂]₀/[Me₆TREN]₀ = 200/1/1/0.2/1.2 at ?20°C with an MMA/HFIP ratio of 1/4 (v/v). For the field desorption mass spectrum of Cu^IBr/Me₆TREN in HFIP, there were [Cu(Me₆TREN)Br]⁺ and [Cu(Me₆TREN)OCH(CF₃)₂]⁺, indicating that HFIP should coordinate to the Cu^I/Me₆TREN complex. The syndiotacticity of the obtained poly(methyl methacrylate)s increased with the decreasing polymerization temperature; the racemo content was 84% for ?78°C, 77% for ?30°C, 75% for ?20°C, and 63% for 30°C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1436–1446, 2006     

Thermal properties and fracture toughness of a liquid‐crystalline epoxy resin cured with an aromatic diamine crosslinker having a mesogenic group

A mesogenic‐type curing agent was synthesized to introduce a mesogenic group not only into epoxy resin backbones but also into the crosslink units. In the mesogenic curing agent system, the domain size became larger, and the network arrangement in each domain existed to a greater extent than that in a system cured with the ordinary diamine curing system according to the evidence from polarized optical micrographs and polarized Fourier transform infrared mapping measurements. Moreover, the fracture toughness of the system was considerably improved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2486–2494, 2006     

Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.