Williamson法合成两亲性聚醚砜酮-聚乙二醇接枝共聚物

含二氮杂萘酮结构的聚醚砜酮(PPESK)是一种新型的耐热可溶解工程塑料,其玻璃化温度高达263~305℃,可用来制造耐高温气体分离、超滤和纳滤膜,表现出优异的综合性能[1~4].然而,膜材料本身的疏水特性使PPESK膜在过滤操作中易遭受膜污染,导致膜性能下降,对膜材料进行亲水化改性以抑     

Preparation and optical properties of Eu(III) complexes J-aggregate formed on the surface of silver nanoparticles

Ag colloidal nanoparticles coated with Eu(TTA)₃ · 2H₂O complexes were prepared, and it was found that Eu(TTA)₃ · 2H₂O complexes J-aggregate was formed on the surface of Ag nanoparticles according to a red shift (18.2 nm) in UV–Vis spectra. However, there had similar excitation wavelength, which was attributed to existence of Ag nanoparticles. Highly luminescent properties of Ag colloidal nanoparticles were observed, and it was believed to result from low energy transfer between Eu(III) complexes and Ag and the large electromagnetic field arising from the excitation of surface plasmon polariton of Ag nanoparticles.     

GAS TRANSPORT PROPERTIES OF A POLYIMIDE BASED ON 2, 2-BIS (3, 4-DECARBOXYPHENYL) HEXAFLUOROPROPANE AND meta-PHENYLENEDIAMINE

By means of a vacuum time-lag method, gas transport properties of apolyimide based on 2, 2- bis (3, 4- decarboxyphenyl ) hexafluoropropane dianhydride (6FDA )and meta- phenylenediamine (mPDA ) have been measured as a function of upstream pres-sure and temperature. The results show that no gas-induced plasticization occurs for thispolyimide in the upstream pressure range from 1 atm to 20atm. The temperature depen-dence of P and D can be described by the Arrhenius equations. The activation energiesof permeation and diffusion were obtained for the gas/polymer pair studied and correlatedwith the size of penetrant gas.     

聚苯乙炔LB多层膜及其光电导性能的研究

制备了聚苯乙炔（ＰＰＡ）ＬＢ多层膜，将其作为电荷产生层首次应用于机能分离型光电导体领域．从π Ａ曲线发现，ＰＰＡ单分子膜具有表面压力的各向异性和松弛特性．ＴＥＭ照片显示，ＰＰＡ分子链在ＬＢ膜中有序排列．转移比和ＸＰＳ的研究表明，复合膜沉积均匀．与ＰＰＡ涂膜相比，以ＰＰＡ ＬＢ多层膜作为电荷产生层的光电导体表面充电电位Ｖ０＝１３４５Ｖ，光照１ｓ后的光衰百分比ΔＶ１ｓ＝６５０５％，半衰时间ｔ１／２＝０５８ｓ，具有更优异的光电导性能．     

Ultralow interfacial tension for enhanced oil recovery at very low surfactant concentrations

The interfacial tension (IFT) between alkanes and several individual surfactants and their mixtures has been investigated, using three kinds of alkyl hydrocarbons: decane, dodecane, and tetradecane. For individual and mixed surfactant systems, critical micelle concentrations and areas per molecule at the hydrocarbon-aqueous solution interface were calculated; for the mixed surfactant systems, betasigma(LL), the molecular interaction parameter at the hydrocarbon-aqueous solution interface, and beta(M), the molecular interaction parameter in mixed micelle formation, were calculated. It was found that IFT in the 10(-3) mN/m (ultralow) range can be obtained at surfactant concentrations below 0.05 wt % and even at concentrations below 0.01 wt %, when mixtures of certain surfactants are used at the proper ratio. Surfactants with branched-chain alkyl groups show a much better IFT reduction effectiveness than those with straight-chain alkyl groups. Contrary to what has been observed at the air-aqueous solution surface, mixtures of two homologues with two hydrophobic groups show significant molecular interactions, with both betasigma(LL) and beta(M) having negative values in the 4-5 range in some cases, with the betasigma(LL) value more negative than beta(M). The relationship between micellar shape and ultralow IFT was investigated by calculating the critical packing parameter of the surfactants. It was found that ultralow IFT between the surfactant mixtures and the three hydrocarbons investigated could reach ultralow (<10(-2) mN/m) values when the critical packing parameter is very close to 1.     

The first chlorogenic acid ester saponin from <Emphasis Type="Italic">Lonicera macranthoides</Emphasis>

An original triterpenoid saponin, named lonimacranthoide I, was isolated from the flower buds of Lonicera macranthoides (Caprifoliaceae). It has hederagenin as aglycone. Lonimacranthoide I is a rare chlorogenic acid ester acylated at C-23 of hederagenin. The structure of the saponin was established based on chemical and spectral methods.     

On the Origin of Foam Stability: Understanding from Viscoelasticity of Foaming Solutions and Liquid Films

The foam stability (drainage half-life) of α-olefin sulfonate (AOS) with partially hydrolyzed polyacrylamide (HPAM) or xanthan gum (XG) solution was evaluated by the Warring Blender method. With the increase of polymer (HPAM or XG) concentration, foam stability of the surfactant–polymer complexes increased, and the drainage half-life of AOS-XG foam was higher than that of AOS-HPAM foam at the same polymer and surfactant concentration. With the addition of polymer (HPAM or XG), the viscoelasticity of bulk solution and the liquid film were enhanced. The viscoelasticity of AOS-XG bulk solution and liquid film were both higher than that of AOS-HPAM counterparts.      

Multicomponent Reactions for Diverse Synthesis of N‐Substituted and NH 1,4‐Dihydropyridines

The multicomponent reactions of aldehydes, electron deficient alkynes and amines have been successfully performed to yield a number of symmetrical 2,6‐unsubstituted 1,4‐dihydropyridines (1,4‐DHPs). This method has been found generally applicable for the synthesis of both N‐substituted and N‐unsubstituted 1,4‐DHPs by employing secondary amine to activate the alkyne component via enaminoester intermediates. The present method runs through an enamine type activation, which is different from the known approach employing AcOH as solvent.     

One-step solution synthesis of Fe2O3 nanoparticles at low temperature

A new synthesis method of α-Fe₂O₃ nanoparticles was developed, in which the ferrous and ferric salts as well as polyaniline acted as the precursor and dispersant, respectively. From the investigation of X-ray diffraction and FT-IR spectra, the α-Fe₂O₃ nanoparticles can be directly prepared by the co-precipitation method without high-temperature calcining. Transmission electron microscope (TEM) and scanning electron microscope (SEM) observation revealed that the α-Fe₂O₃ nanoparticles had average diameters ranging from 30.0 to 75.0 nm. Compared with previous methods, this present method shows an easy processing and can be applied on the large-scale produce of α-Fe₂O₃ nanoparticles in one step.     

Simple synthesis of zwitterionic diblock copolymers for the application on metal nanoparticles preparation

AB diblock copolymers of poly(2-(dimethylamino)ethyl metharylate-block-potassiurn acrylate) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The structure of the block polymer was determined by the nuclear magnetic resonance (NMR) spectroscopy and the gel permeation chromatography. Moreover, it has also been shown that the diblock copolymers exhibit aggregate as function of the pH according to the result of ¹H-NMR spectroscopy, FT-IR absorption spectra, UV-vis transmittance spectroscopy, transmission electron microscopy and ultrasonic particle size analyzer. The result was attributed that such AB diblock copolymers were tailored to undergo pH-induced self-assembly. Furthermore, the aggregate can be as template of metal nanoparticles preparation, and the sizes of the aggregate, in turn, strongly control nanoparticle sizes.