A Simple Chaotic Circuit with Impulsive Switch Depending on Time and State

This paper presents a simple chaotic circuit consisting of two capacitors, one linear two-port VCCS and one time-state-controlled impulsive switch. The impulsive switch causes rich chaotic and periodic behavior. The circuit dynamics can be simplified into a one-dimensional return map that is piecewise linear and piecewise monotone. Using the return map, we clarify parameter conditions for existence of chaotic and periodic attractors and coexistence state of attractors.     

Diversification of shotgun process

Three protocols for shotgun process are put forth in which simultaneous multi-fold reactions occur exclusively to each other. The first one involves simple combination of selective and non-selective reactions. Even if the simple protocol fails to give rise to the high selectivity, satisfactory outcome can be achieved by kinetic control or adjustment of functional groups.     

Effect of nitriding on grain oriented silicon steel bearing aluminum (the second study)

All kinds of high-permeability GO are manufactured using AlN as the main inhibitor. From a purely metallurgical viewpoint, three types of inhibitor preparation for high-permeability GO have been shown. They include a complete solution without nitriding, a complete precipitation with nitriding and a partial precipitation with nitriding. In this study, another possibility, i.e., a complete solution method with nitriding, was investigated to avoid the extra high-temperature slab reheating and to examine the effect of nitriding on GO bearing Al. This method can also provide the sharp Goss texture, and nitriding is shown to be very useful for changing the inhibitor intensity, depending on the primary grain size.     

Effects of natural polysaccharide addition on drug release from calcium-induced alginate gel beads

Calcium-induced alginate gel beads (Alg-Ca) containing various polysaccharides, including an alginate hydrolysate, were prepared and the drug release profiles were investigated. Hydrocortisone (HC) was gradually released from Alg-Ca into the mimic gastric fluid, while in intestinal fluid, it was quickly released with the dissolution of Alg-Ca. However, with Alg-Ca containing 5% chitin (CT), dissolution of Alg-Ca was not observed, and release of HC showed apparent zero-order kinetics. Furthermore, addition of the alginate hydrolysate altered the HC-release profile for Alg-Ca.     

One-step synthesis of 4-aminodihydrobenzofurans and 4-hydroxyindoles via dehydrogenation-heteromercuration of 2-alyl-3-aminocyclohexenones using mercury(II) acetate

On treatment of the 2-allyl-3-aminocyclohexenones with mercury(II) acetate, either sequence, dehydrogenation—oxymercuration or dehydrogenation—aminomercuration, occurred depending on the nature of the amino group in the substrate to yield the dihydrobenzofurans or indoles, respectively.     

VISUAL PIGMENTS—10. SPECTROSCOPY AND PHOTOPHYSICAL DYNAMICS OF RETINOL AND RETINYL ETHER

Abstract— The absorption and emission spectra, lifetimes and quantum yields of all-trans retinol have been examined as a function of solvent and temperature. In addition, the spectroscopy of retinyl ether and 2 other polyene alcohols have been determined. Based on the results obtained, we conclude that the singlet excited state of retinol and retinyl cther is of a forbidden character and of the type loosely called ¹A^-_g. Retinol forms a dimer in an alkane solvent when cooling from 298 to 77 K. A general structure for the dimer is proposed.     

Radiation-induced polymerization of cyclohexene sulfide in the solid state

Radiation-induced solid-state polymerization of cyclohexene sulfide has been investigated. Differential thermal analysis shows that this compound has a phase transition point at ?74°C and behaves as a plastic crystal in the temperature range from ?74 to ?20°C (melting point). By rapid cooling, this plastic crystal was easily supercooled, and below ?166°C a glassy crystal, i.e., a supercooled nonequilibrium state of plastic crystal, was obtained. In-source polymerization proceeded in the plastic crystalline state. Postpolymerization of glassy crystalline monomer irradiated at ?196°C occurred above ?166°C (glass transition point) during subsequent heating.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

Scale-up of high shear granulation based on the internal stress measurement

Scale-up of wet granulation in a vertical high shear mixer was conducted. Pharmaceutical excipient powders composed of lactose, cornstarch and micro-crystallinecellulose, and hydroxypropylcellulose as a binder were mixed together and then granulated with purified water under various operating conditions and vessel scales. A novel internal stress measurement system was developed and stress of normal and tangential directions that granules received from the agitator blade during the granulation was continuously measured. The results indicated that granules received stress mainly from the tangential direction, which also showed the largest value near at the vessel wall. The effects of the agitator tip speed and the centrifugal acceleration on the measured stress was investigated. It was found that the tip speed of the agitator blade could be the main factor for the granule growth. The physical properties such as strength, size distribution and compressibility of granules prepared by changing the operating conditions and the vessel scales were evaluated and the scale-up characteristics of high shear granulation were investigated experimentally. The results showed that these physical properties had linear correlations with the tip speed. It was finally concluded that the scale-up of high shear granulation could be well conducted by means of the tip speed of the agitator blade.     

Regioselectivity in palladium-indium iodide-mediated allylation reaction of glyoxylic oxime ether and N-sulfonylimine

Allylation reaction of electron-deficient imines with allylic alcohol derivatives in the presence of a catalytic amount of palladium(0) complex and indium(I) iodide was studied. The reversibility of allylation was observed in the reaction of glyoxylic oxime ether having camphorsultam. As the important effect of water on regioselectivity, the gamma-adducts were kinetically formed from monosubstituted allylic reagents in the presence of water. The selective formation of thermodynamically stable alpha-adducts was observed in anhydrous THF. In contrast, the allylation of N-sulfonylimine gave the gamma-adducts with high regioselectivities even under anhydrous reaction conditions.