Formulation–composition map of a lecithin-based emulsion

Formulation–composition map is an interesting tool to predict the nature of an emulsion, stability, viscosity and nevertheless to decide the mixing protocol of its ingredients. Information based on optimum formulation (environmental conditions at which the affinity of an emulsifier for oil and for aqueous phase is same), which is depicted through hydrophilic–lipophilic deviation (HLD) concept, is necessary to make a formulation–composition map of an emulsion. In order to apply this concept in food emulsions, it is necessary to determine characteristic constants of each component of the system, i.e. the aqueous phase, the oil phase and the emulsifier at equilibrium. In this work formulation–composition map of a sunflower oil–water–lecithin system, based on the knowledge of phase behavior of lecithin at equilibrium and emulsification, was made. The shape of inversion line on formulation–composition map was not the classical stair type rather an almost vertical inversion line at water-fraction (f_w) near 0.20 was observed. It was supposed to be linked to the viscosity of oil phase which was 50 times the viscosity of aqueous phase. Additionally, emulsions were of oil-in-water (O/W) type for f_w higher than 0.20, but their viscosity and the drop size behavior with respect to salt concentration as formulation variable did not show the existence of transitional inversion line on formulation–composition map. Such map in advance can certainly facilitate the guidelines for dynamic emulsification.     

Modification des polydienes par les dihalocarbenes-etude sur molecule modele de polyisoprene-3,4

A study has been made of the addition of dihalocarbenes to synthetic polybutadienes and polyisoprenes, having low molecular weights and principally 1,2 or 3,4 enchainments. The gemdihalocyclopropane groups have been transformed to allenic groups; this change makes it possible to obtain macromolecules having carbonyl groups in the side-chains by hydration of the 1,2 double bond of the allene. In order to define the conditions for this reaction, there has been a preliminary study on a molecule acting as a model for the unit in polyisoprene-3,4 viz. methyl-2 ethyl-3 pentene-1.     

Theoretical interpretation of X-rays photo-absorption in medium-Z elements plasmas measured at LULI2000 facility

We analyzed the spectra of X-ray transmission through radiatively heated medium-Z plasma (Fe, Ni, Cu and Ge) measured at LULI2000 facility in the wavelength range of 2p–nd transitions. The analysis was performed using the statistical superconfiguration code SCO, two line-by-line opacity codes based on the HULLAC and FAC packages and a new hybrid statistical-detailed code SCORCG. The temperature and mass density of the samples were estimated from hydrodynamic simulations based on the cavity radiative temperature measurements. The theory–experiment agreement is relatively good in the wavelength range corresponding to the 2p–3d transitions except in the germanium case. In the wavelength range of the 2p–2d, n > 3 transitions a relatively good theory–experiment agreement was found in the copper case. As predicted by calculations the separation of the characteristic spin-orbit-split 2p–3d structures, absent in the iron measured spectrum, appears in the nickel spectrum and is visible in the copper and germanium spectra. Comparisons of the experimental transmission with calculations confirm the importance of the relativistic configuration interaction. The absorption strength of the measured germanium 2p–3d transition is much larger than that obtained from the codes. Spatial temperature and density gradients, relatively high in the germanium sample, may be at the origin of this discrepancy.     

Plasmon Waveguide Resonance: Principles,Applications and Historical Perspectives on Instrument Development

Plasmon waveguide resonance (PWR) is a variant of surface plasmon resonance (SPR) that was invented about two decades ago at the University of Arizona. In addition to the characterization of the kinetics and affinity of molecular interactions, PWR possesses several advantages relative to SPR, namely, the ability to monitor both mass and structural changes. PWR allows anisotropy information to be obtained and is ideal for the investigation of molecular interactions occurring in anisotropic-oriented thin films. In this review, we will revisit main PWR applications, aiming at characterizing molecular interactions occurring (1) at lipid membranes deposited in the sensor and (2) in chemically modified sensors. Among the most widely used applications is the investigation of G-protein coupled receptor (GPCR) ligand activation and the study of the lipid environment’s impact on this process. Pioneering PWR studies on GPCRs were carried out thanks to the strong and effective collaboration between two laboratories in the University of Arizona leaded by Dr. Gordon Tollin and Dr. Victor J. Hruby. This review provides an overview of the main applications of PWR and provides a historical perspective on the development of instruments since the first prototype and continuous technological improvements to ongoing and future developments, aiming at broadening the information obtained and expanding the application portfolio.     

Polarized transient absorption to resolve electron transfer between tryptophans in DNA photolyase

Transient absorption spectroscopy is a powerful tool for studying biological electron-transfer chains, provided that their members give rise to distinct changes of their absorption spectra. There are, however, chains that contain identical molecules, so that electron transfer between them does not change net absorption. An example is the chain flavin adenine dinucleotide (FAD)-W382-W359-W306 in DNA photolyase from E. coli. Upon absorption of a photon, the excited state of FADH* (neutral FAD radical) abstracts an electron from the tryptophan residue W382 in approximately 30 ps (monitored by transient absorption). The cation radical W382*+ is presumably reduced by W359 and W359*+ by W306. The latter two reactions could not be monitored directly so far because the absorption changes of the partners compensate in each step. To overcome this difficulty, we used linearly polarized flashes for excitation of FADH*, thus inducing a preferential axis in the a priori unoriented sample (photoselection). Because W359 and W306 are very differently oriented within the protein, detection with polarized light should allow us to distinguish them. To demonstrate this, W306 was mutated to redox-inert phenylalanine. We show that the resulting anisotropy spectrum of the initial absorption changes (measured at 10 ns time resolution) is in line with W359 being oxidized. The corresponding spectrum in wildtype photolyase is clearly different and identifies W306 as the oxidized species. These findings set an upper limit of 10 ns for electron transfer from W306 to W359*+ in wildtype DNA photolyase, consistent with previous, more indirect evidence [Aubert, C.; Vos, M. H.; Mathis, P.; Eker, A. P. M.; Brettel, K. Nature 2000, 405, 586-590].     

Isoquinoline-based lanthanide complexes: bright NIR optical probes and efficient MRI agents

In the objective of developing ligands that simultaneously satisfy the requirements for MRI contrast agents and near-infrared emitting optical probes that are suitable for imaging, three isoquinoline-based polyaminocarboxylate ligands, L1, L2 and L3, have been synthesized and the corresponding Gd(3+), Nd(3+) and Yb(3+) complexes investigated. The specific challenge of the present work was to create NIR emitting agents which (i) have excitation wavelengths compatible with biological applications and (ii) are able to emit a sufficient number of photons to ensure sensitive NIR detection for microscopic imaging. Here we report the first observation of a NIR signal arising from a Ln(3+) complex in aqueous solution in a microscopy setup. The lanthanide complexes have high thermodynamic stability (log K(LnL) =17.7-18.7) and good selectivity for lanthanide ions versus the endogenous cations Zn(2+), Cu(2+), and Ca(2+) thus preventing transmetalation. A variable temperature and pressure (17)O NMR study combined with nuclear magnetic relaxation dispersion measurements yielded the microscopic parameters characterizing water exchange and rotation. Bishydration of the lanthanide cation in the complexes, an important advantage to obtain high relaxivity for the Gd(3+) chelates, has been demonstrated by (17)O chemical shifts for the Gd(3+) complexes and by luminescence lifetime measurements for the Yb(3+) analogues. The water exchange on the three Gd(3+) complexes is considerably faster (k(ex)(298) = (13.9-15.4) × 10(6) s(-1)) than on commercial Gd(3+)-based contrast agents and proceeds via a dissociative mechanism, as evidenced by the large positive activation volumes for GdL1 and GdL2 (+10.3 ± 0.9 and +10.6 ± 0.9 cm(3) mol(-1), respectively). The relaxivity of GdL1 is doubled at 40 MHz and 298 K in fetal bovine serum (r(1) = 16.1 vs 8.5 mM(-1) s(-1) in HEPES buffer), due to hydrophobic interactions between the chelate and serum proteins. The isoquinoline core allows for the optimization of the optical properties of the luminescent lanthanide complexes in comparison to the pyridinic analogues and provides significant shifts of the excitation energies toward lower values which therefore become more adapted for biological applications. L2 and L3 bear two methoxy substituents on the aromatic core in ortho and para positions, respectively, that further modulate their electronic structure. The Nd(3+) and Yb(3+) complexes of the ligand L3, which incorporates the p-dimethoxyisoquinoline moiety, can be excited up to 420 nm. This wavelength is shifted over 100 nm toward lower energy in comparison to the pyridine-based analogue. The luminescence quantum yields of the Nd(3+) (0.013-0.016%) and Yb(3+) chelates (0.028-0.040%) are in the range of the best nonhydrated complexes, despite the presence of two inner sphere water molecules. More importantly, the 980 nm NIR emission band of YbL3 was detected with a good sensitivity in a proof of concept microscopy experiment at a concentration of 10 μM in fetal bovine serum. Our results demonstrate that even bishydrated NIR lanthanide complexes can emit a sufficient number of photons to ensure sensitive detection in practical applications. In particular, these ligands containing an aromatic core with coordinating pyridine nitrogen can be easily modified to tune the optical properties of the NIR luminescent lanthanide complexes while retaining good complex stability and MRI characteristics for the Gd(3+) analogues. They constitute a highly versatile platform for the development of bimodal MR and optical imaging probes based on a simple mixture of Gd(3+) and Yb(3+)/Nd(3+) complexes using an identical chelator. Given the presence of two inner sphere water molecules, important for MRI applications of the corresponding Gd(3+) analogues, this result is particularly exciting and opens wide perspectives not only for NIR imaging based on Ln(3+) ions but also for the design of combined NIR optical and MRI probes.