Cyclic deformation of aluminium and its alloys

The formation of slip bands is the main mechanism of cyclic deformation in pure Al. Their density, orientation and heights in polycrystalline Al were investigated during cycling. Types, sizes and densities of precipitates are responsible for the mode of cyclic deformation in AlCu4 pure alloy. In technical Al alloys intermetallic phases have detrimental effects on deformation homogeneity and largely govern the fatigue mechanism of the material and especially microcrack initiation.     

The reaction of thiocaprylic acid with methyl thiocyanate

Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2154–2155, September, 1989.     

含氧光敏引发体系的研究——Ⅵ.二苯酮/三乙胺体系引发光聚合过程中的再次引发效应

过去,作者曾发表了多种光敏引发体系引发烯类单体光聚合的工作,在研究2,2-二甲氧基苯乙酮在氧存在下引发甲基丙烯酸甲酯光聚合时,结合在聚合物链端的引发剂碎片具有光化学活性,在光聚合反应中产生高分子自由基,发生再次聚合,出现高分子量     

Synthesis of Derivatives of of Δ2-Imidazolin-5-one and Imidazolidine Containing Residues of Sterically-hindered Phenols

1-Substituted 4-benzylidene-2-{-[3,5-di(tert-butyl)-4-hydroxyphenyl]vinyl}-4-benzylidene-²-imidazolin-5-ones have been synthesized by the interaction of azomethines and N-acylhydrazones (derivatives of 3,5-di(tert-butyl)-4-hydroxybenzaldehyde) with 4-benzylidene-2-methyloxazol-5-one. The acylation of 1,2-bis[3,5-di(tert-butyl)-4-hydroxybenzylideneamino]ethane with acid chlorides in acetonitrile in the presence of triethylamine leads to 1,3-diacyl-2-[3,5-di(tert-butyl)-4-hydroxyphenyl]imidazolidine.     

Isostructural self-assembled monolayers. 2. Methyl 1-(3-mercaptopropyl)-oligo(ethylene oxide)s

The structural order and ordering conditions of the self-assembled monolayers (SAMs) of HSCH2CH2CH2O(EO)xCH3, where EO = CH2CH2O and x = 3-9, on polycrystalline gold (Au) were determined by reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and electrochemical impedance spectroscopy. For x = 5-7, RAIRS and SE data show that the oligo(ethylene oxide) [OEO] segments adopt the near single phase, 7/2 helical conformation of the folded-chain crystal polymorph of crystalline poly(ethylene oxide), oriented normal to the substrate. These SAMs exhibit OEO segment structure and orientation identical to that found in a previous isostructural series [HS(CH2CH2O)6-8C18H37 SAMs. Vanderah, D. J., et al. Langmuir 2003, 19, 3752] and are anisotropic films for surface science metrology where structure is constant and thickness increases in 0.30 nm increments. In addition, this is the first example of OEO SAMs to attain this highly ordered, helical conformation where the (EO)x segment is separated from the Au-sulfur headgroup by a polymethylene chain. For x = 4, 8, and 9, the SAMs are largely helical but show evidence of nonhelical conformations and establish the upper and lower limits of the isostructural set. For x = 3, the SAMs are largely disordered containing some all-trans conformation. SAM order as a function of immersion time from 100% water and 95% ethanol indicates that the HSCH2CH2CH2O(EO)5-7CH3 SAMs order faster and under a wider range of conditions than omega-alkyl 1-thiaolio(ethylene oxide) [HS(EO)xCH3] SAMs, reported earlier (Vanderah, D. J., et al. Langmuir 2002, 18, 4674 and Vanderah, D. J., et al. Langmuir 2003, 19, 2612).     

Mode of turbulent heating of plasma by hot and cold ions

Turbulent heating of plasma particles in the mode of strong heating by hot ions and weak heating by cold ions, where the turbulent state lifetime is not limited as in the case of heating by ions with equal temperatures, is discussed.     

Comparative investigations of LiVPO4F/C and Li3V2(PO4)3/C synthesized in similar soft chemical route

Triclinic LiVPO₄F and monoclinic Li₃V₂(PO₄)₃ are synthesized through a soft chemical process with mechanical activation assist, followed by annealing. In this process, ascorbic acid is used as reducing agent as well as carbon source. The as-prepared samples are coated with amorphous carbon. XPS analysis results show the expected valency states of ions in LiVPO₄F and Li₃V₂(PO₄)₃. The electrochemical properties of the prepared LiVPO₄F/C and Li₃V₂(PO₄)₃/C cathodes are evaluated. The as-prepared LiVPO₄F/C cathode shows an initial discharge specific capacity of 140?±?3 mAh?g^?1 at 30 mA?g^?1 in the voltage range of 3.0~4.4 V, compared with that of 138?±?3 mAh?g^?1 possessed by Li₃V₂(PO₄)₃/C. Both samples exhibit good cycle performance at different current densities. The capacity delivered by LiVPO₄F remains 95.5 and 91.7 % of its initial discharge capacity after 50 cycles at 150 and 750 mA?g^?1, respectively, while 97.4 and 90.6 % for Li₃V₂(PO₄)₃/C. But the rate capability of LiVPO₄F/C is not so good compared with as-prepared Li₃V₂(PO₄)₃/C.     

Alkylation of 3‐Phenyl‐1H‐pyrazolo[4,3‐c] quinoline: Theoretical Analysis of Regioselectivity

The interaction of 3‐phenyl‐1H‐pyrazolo[4.3‐c]quinoline with alkylating agents in the presence of NaH leads mainly to N1‐substituted derivatives. The regioselectivity of the reaction has been studied using AM1 semi‐empirical calculations in the isolated molecule approximation.     

新型氮杂环卡宾催化剂的合成及其在烯烃的自由基氟烷基酰化反应中的应用研究

以环庚酮及环己（庚）胺为起始原料,经溴代、环化、脱硫等反应,以良好的收率合成了环烷基取代的新型噻唑骨架的氮杂环卡宾催化剂。结果表明,在该催化剂催化下成功地实现了烯烃的自由基氟烷基酰化反应,以中等的收率完成了三种类型的γ-氟烷基取代酮的高效合成。所得化合物通过¹H NMR, ¹³C NMR, ¹⁹F NMR和HR-MS（ESI-TOF）进行表征。