Uniaxial deformation and orientation of ethylene–tetrafluoroethylene films

This study concerns the thermal and mechanical response of several commercial grades of ethylene – tetrafluoroethylene copolymer films. Differential scanning calorimetry was used to show that, although films have similar degrees of crystallinity and melting temperature, the melting endotherms and crystallisation exotherms differ between materials, suggesting small changes in composition between manufacturers. Films were deformed in tension at a range of temperatures and rates. Selected films were unloaded immediately after stretching, and measurement of the elastic recovery highlighted further differences between materials. Batches of films were pre-drawn uniaxially above the glass transition and immediately quenched. When these materials were subsequently re-drawn below the glass transition temperature, most of them exhibited much improved yield stress, modulus and tensile strength (improving by factors of 5, 5 and 4, respectively at a draw ratio of 3), but a reduced strain to failure. In most of the films, the pre-drawing, as well as the initial orientation of the films, is accounted for by a simple shift in the true strain axis. This is indicative of a material response dominated by entropic network stretch. It also suggests that, in the cases where strain superposition does not work, a different arrangement of crystalline lamellae may be present, limiting the extent to which improved properties can be achieved in some materials.     

Quarkonia at Finite T: An Approach Based On QCD Sum Rules and the Maximum Entropy Method

Quarkonium spectral functions at finite temperature are studied, making use of a recently developed method of analyzing QCD sum rules by the maximum entropy method. This approach enables us to directly obtain the spectral function from the sum rules, without having to introduce any specific assumption about its functional form. QCD sum rules for heavy quarkonia incorporate finite temperature effects in form of changing values of the various gluonic condensates that appear in the operator product expansion. These changes depend on the energy density and pressure at finite temperature, which we extract from quenched lattice QCD calculations. As a result, it is found that the charmonium ground states of both S-wave and P-wave channels dissolve into the continuum already at temperatures around or slightly above the critical temperature T _c , while the bottomonium states are less influenced by temperature effects, surviving up to about 2.5 T _c or higher for S-wave and about 2.0 T _c for P-wave states.     

Composite Polybenzimidazole Membrane with High Capacity Retention for Vanadium Redox Flow Batteries

Currently, energy storage technologies are becoming essential in the transition of replacing fossil fuels with more renewable electricity production means. Among storage technologies, redox flow batteries (RFBs) can represent a valid option due to their unique characteristic of decoupling energy storage from power output. To push RFBs further into the market, it is essential to include low-cost materials such as new generation membranes with low ohmic resistance, high transport selectivity, and long durability. This work proposes a composite membrane for vanadium RFBs and a method of preparation. The membrane was prepared starting from two polymers, meta-polybenzimidazole (6 μm) and porous polypropylene (30 μm), through a gluing approach by hot-pressing. In a vanadium RFB, the composite membrane exhibited a high energy efficiency (~84%) and discharge capacity (~90%) with a 99% capacity retention over 90 cycles at 120 mA·cm⁻², exceeding commercial Nafion^® NR212 (~82% efficiency, capacity drop from 90% to 40%) and Fumasep^® FAP-450 (~76% efficiency, capacity drop from 80 to 65%).     

Viscoelastic phase diagram of fluorinated and grafted polymer films and proton‐exchange membranes for fuel cell applications

The influence of temperature and moisture activity on the viscoelastic behavior of fluorinated membranes for fuel cell applications was investigated. Uncrosslinked and crosslinked ethylene tetrafluoroethylene (ETFE)‐based proton‐conducting membranes were prepared by radiation grafting and subsequent sulfonation and their behavior was compared with ETFE base film and commercial Nafion^® NR212 membrane. Uniaxial tensile tests and stress relaxation tests at controlled temperature and relative humidity (RH) were carried out at 30 and 50 °C for 10% < RH < 90%. Grafted films were stiffer and exhibited stronger strain hardening when compared with ETFE. Similarly, both uncrosslinked and crosslinked membranes were stiffer and stronger than Nafion^®. Yield stress was found to decrease and moisture sensitivity to increase on sulfonation. The viscoelastic relaxation of the grafted films was found to obey a power‐law behavior with exponent equal to ?0.04 ± 0.01, a factor of almost 2 lower than ETFE, weakly influenced by moisture and temperature. Moreover, the grafted films presented a higher hygrothermal stability when compared with their membranes counterparts. In the case of membranes, a power‐law behavior at RH < 60% was also observed. However, a markedly different behavior was evident at RH > 60%, with an almost single relaxation time exponential. An exponential decrease of relaxation time with RH from 60 s to 10 s was obtained at RH ≥ 70% and 30 °C. The general behavior of grafted films observed at 30 °C was also obtained at 50 °C. However, an anomalous result was noticed for the membranes, with a higher modulus at 50 °C when compared with 30 °C. This behavior was explained by solvation of the sulfonic acid groups by water absorption creating hydrogen bonding within the clusters. A viscoelastic phase diagram was elaborated to map critical conditions (temperature and RH) for transitions in time‐dependent behavior, from power‐law scaling to exponential scaling. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1139–1148     

(Benzo[4, 5]cyclohepta[l, 2-b]thiophen-4-ylidene)acetic Acids: Novel Non-ulcerogenic Antiinflammatory Agents

Compound (Z)- 8a has been found to display interesting antiinflammatory activity. In order to prepare derivatives with a wide variety of substituents in the aromatic part of the molecule, a new synthesis of the key intermediates 9a-g was developed starting from thiophene-3-carboxylic acid ( 11 ) and substituted benzyl bromides. The conversion of 9a-g to 10a-g follows a known procedure. Ketones 10a-g , on reaction with alkyl (dialkoxy-phosphoryl)acetate, followed by isomer separation and alkaline ester hydrolysis, yielded the desired derivatives (Z)- 8a-g and (E)- 8a-g . The biologically most interesting compound (Z)- 8a is currently undergoing clinical trials.     

Charmonium spectra at finite temperature from QCD sum rules with the maximum entropy method

Charmonia spectral functions at finite temperature are studied using QCD sum rules in combination with the maximum entropy method. This approach enables us to directly obtain the spectral function from the sum rules, without having to introduce any specific assumption about its functional form. As a result, it is found that while J/ψ and η(c) manifest themselves as significant peaks in the spectral function below the deconfinement temperature T(c), they quickly dissolve into the continuum and almost completely disappear at temperatures between 1.0T(c) and 1.1T(c).     

Compound set enrichment: a novel approach to analysis of primary HTS data

The main goal of high-throughput screening (HTS) is to identify active chemical series rather than just individual active compounds. In light of this goal, a new method (called compound set enrichment) to identify active chemical series from primary screening data is proposed. The method employs the scaffold tree compound classification in conjunction with the Kolmogorov-Smirnov statistic to assess the overall activity of a compound scaffold. The application of this method to seven PubChem data sets (containing between 9389 and 263679 molecules) is presented, and the ability of this method to identify compound classes with only weakly active compounds (potentially latent hits) is demonstrated. The analysis presented here shows how methods based on an activity cutoff can distort activity information, leading to the incorrect activity assignment of compound series. These results suggest that this method might have utility in the rational selection of active classes of compounds (and not just individual active compounds) for followup and validation.     

Oxidative Coupling of αω,-Di(cyclopentadienyl)alkane-diides

The Cu^II-induced oxidative coupling of αω,-di(cyclopentadienyl)alkane-diides 6 (n = 2–5) has been shown to proceed mainly by an intermolecular pathway to give polymers 8 , while the yield of intramolecular coupling 6 → 7 strongly decreases with increasing number n of C-atoms of the alkyl chain (Scheme 3). For n = 2, intramolecular coupling may be considerably enhanced by replacing the H-atoms of the CH₂CH₂ bridge of 6a (n = 2) by Me groups. In this case, intramolecular couplings 11 → 20 (Scheme 7) and 22 → 23 + 24 (Scheme 8) are accomplished with a total yield of 59% and 54%, respectively. All the intramolecular couplings investigated so far proceed stereoselectively to give the C₂-symmetrical cyclohexanes 7a, 20 and 23 with a fixed chair conformation. These results are easily explained, if a conformational equilibrium E ? F is operative in which large substituents R are assumed to enhance the gauche-conformation F which is the favored conformation for intramolecular couplings. Bridged dihydropentafulvalenes 20 and 23 are quantitatively rearranged to the thermodynamically favored bridged pentafulvenes 27 and 28 under base or acid catalysis, respectively (Scheme 9).