Phase diagram, crystal chemistry and thermoelectric properties of compounds in the Ca-Co-Zn-O system

In the Ca-Co-Zn-O system, we have determined the tie-line relationships and the thermoelectric properties, solid solution limits, and structures of two low-dimensional cobaltite series, Ca₃(Co, Zn)₄O_9−z and Ca₃(Co,Zn)₂O_6−z at 885 °C in air. In Ca₃(Co,Zn)₄O_9−z, which has a misfit layered structure, Zn was found to substitute in the Co site to a limit of Ca₃(Co_3.8Zn_0.2)O_9−z. The compound Ca₃(Co,Zn)₂O_6−z (n=1 member of the homologous series, Ca_n+2(Co,Z_n)_n(Co,Zn)′O_3n+3−z) consists of one-dimensional parallel (Co,Zn)₂O₆⁶⁻ chains that are built from successive alternating face-sharing (Co,Zn)O₆ trigonal prisms and ‘n’ units of (Co,Zn)O₆ octahedra along the hexagonal c-axis. Zn substitutes in the Co site of Ca₃Co₂O₆ to a small amount of approximately Ca₃(Co_1.95Zn_0.05)O_6−z. In the ZnO-CoO_z system, Zn substitutes in the tetrahedral Co site of Co₃O₄ to the maximum amount of (Co_2.49Zn_0.51)O_4−z and Co substitutes in the Zn site of ZnO to (Zn_0.94Co_0.06)O. The crystal structures of (Co_2.7Zn_0.3)O_4−z, (Zn_0.94Co_0.06)O, and Ca₃(Co_1.95 Zn_0.05)O_6−z are described. Despite the Ca₃(Co, Zn)₂O_6−z series having reasonably high Seebeck coefficients and relatively low thermal conductivity, the electrical resistivity values of its members are too high to achieve high figure of merit, ZT.     

Formal aza-Michael additions to tropone: Addition of diverse aryl- and alkylamines to tricarbonyl(tropone)iron and [(C7H7O)Fe(CO)3]BF4

A formal aza-Michael addition to tropone by way of tricarbonyl(tropone)iron and/or the tetrafluoroborate salt formed via protonation of the complex is reported. Tricarbonyl(tropone)iron smoothly undergoes the direct aza-Michael reaction with unhindered aliphatic amines under solvent free conditions in good yields. Meanwhile, the known cationic complex [(C₇H₇O)Fe(CO)₃]BF₄ (whose reaction with a small number of nucleophiles was previously reported) undergoes addition with an even broader array of amine nucleophiles. Finally, it was discovered that protecting the aza-Michael adduct as a carbamate was necessary for oxidative demetallation of the complex.     

Molecular Weight Control via Cross Metathesis in Photo-Redox Mediated Ring-Opening Metathesis Polymerization

Photo-redox mediated ring-opening metathesis polymerization (photo-ROMP) is an emerging ROMP technique that uses an organic redox mediator and a vinyl ether initiator, in contrast to metal-based initiators traditionally used in ROMP. The reversibility of the redox-mediated initiation and propagation steps enable spatiotemporal control over the polymerization. Herein, we explore a simple, inexpensive means of controlling molecular weight, using alpha olefins as chain transfer agents. This method enables access to low molecular weight oligomers, and molecular weights between 1 and 30 kDa can be targeted simply by altering the stoichiometry of the reaction. This method of molecular weight control was then used to synthesize a functionalized norbornene copolymer in a range of molecular weights for specific materials applications.     

Thermal conductivity of CoSb3 nano‐composites grown via a novel solvothermal nano‐plating technique

We have utilized a solvothermal nano‐plating technique to grow nano‐structured CoSb₃ directly onto the surface of micron‐sized CoSb₃ particles that were subsequently hot pressed and densified into a homogeneous skutterudite nano‐composite. We herein present results for three samples: a bulk sample to serve as a reference, and two samples with solvothermally grown nano‐structures of 5 wt% and 20 wt%, respectively. All three samples used the same bulk starting materials. The thermal conductivity was measured via two independent techniques (steady state and laser flash) and both show a systematic reduction in the thermal conductivity with an increasing amount of nano‐structures. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spectroscopic and photopolymerization studies of benzyl methacrylate/poly(benzyl methacrylate) two‐component system

The influence of the viscosity of a two‐component system on its molecular dynamics (on the basis of hypersonic wave velocity and attenuation coefficient) and photopolymerization kinetics was studied. The system investigated represented the solution of poly(benzyl methacrylate), PBzMA (MW = 70000) in its monomer, benzyl methacrylate (BzMA). The viscosity of the system was varied by adding various amounts of the polymer to the monomer (10–50 wt %). The molecular dynamics in the neat BzMA was studied by the proton Nuclear Magnetic Resonance (NMR) spin‐lattice relaxation time measurements and the wide‐line ¹H NMR spectroscopy in a wide range of temperature. Information on the local dynamics in liquid BzMA above its melting temperature was gained from the high‐resolution ¹H and ¹³C NMR spectra. The hypersonic wave velocity and the attenuation coefficient were investigated in the appropriate temperature range related to a viscoelastic relaxation process by the Brillouin light scattering method. The kinetic measurements have demonstrated that the photopolymerization rate rapidly increases and the monomer conversion decreases with increasing polymer‐to‐monomer ratio; this effect has been noted in the whole range of polymer concentration and reaction temperature studied. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1336–1348, 2010     

High‐temperature thermoelectric properties of p‐type skutterudites Ybx Co3FeSb12

Partially filled polycrystalline p‐type skutterudites of nominal compositions Yb_x Co₃FeSb₁₂ were synthesized and their thermoelectric properties characterized. The compositions and filling fractions were confirmed with a combination of Rietveld refinement and elemental analysis. The thermoelectric properties were evaluated from 300 K to 810 K. The Seebeck coefficient and resistivity increase while the thermal conductivity decreases with increasing Yb content. A maximum ZT value of 0.85 was obtained at 810 K. This work is part of a continuing effort to enhance the thermoelectric properties of p‐type skutterudites, as this class of materials continues to be of interest for thermoelectrics applications. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Round-robin measurements of two candidate materials for a Seebeck coefficient Standard Reference Material™

A Standard Reference Material (SRM^™) for the Seebeck coefficient is critical for inter-laboratory data comparison and for instrument calibration. To develop this SRM^™, we have conducted an international round-robin measurement survey of two candidate materials—undoped Bi₂Te₃ and constantan (55% Cu and 45% Ni alloy). Measurements were performed in two rounds by twelve laboratories involved in active thermoelectric research using a number of commercial and custom-built measurement systems and techniques. We report the results of these measurements and the statistical analysis performed. Based on this extensive study, we have selected Bi₂Te₃ as the prototype standard material.     

Molecular Weight Control via Cross Metathesis in Photo‐Redox Mediated Ring‐Opening Metathesis Polymerization

Photo‐redox mediated ring‐opening metathesis polymerization (photo‐ROMP) is an emerging ROMP technique that uses an organic redox mediator and a vinyl ether initiator, in contrast to metal‐based initiators traditionally used in ROMP. The reversibility of the redox‐mediated initiation and propagation steps enable spatiotemporal control over the polymerization. Herein, we explore a simple, inexpensive means of controlling molecular weight, using alpha olefins as chain transfer agents. This method enables access to low molecular weight oligomers, and molecular weights between 1 and 30 kDa can be targeted simply by altering the stoichiometry of the reaction. This method of molecular weight control was then used to synthesize a functionalized norbornene copolymer in a range of molecular weights for specific materials applications.