Functional Groups Assisted Tunable Dielectric Permittivity of Guest-Free Zn-Based Coordination Polymers for Gate Dielectrics

The dielectric properties of coordination polymers has been a topic of recent interest, but the role of different functional groups on the dielectric properties of these polymers has not yet been fully addressed. Herein, the effects of electron-donating (R=NH₂) and electron-withdrawing (R=NO₂) groups on the dielectric behavior of such materials were investigated for two thermally stable and guest-free Zn-based coordination polymers, [Zn(L₁)(L₂)]_n ( 1 ) and [Zn(L₁)(L₃)]_n ( 2 ) [L₁=2-(2-pyridyl) benzimidazole (Pbim), L₂=5-aminoisophthalate (Aip), and L₃=5-nitroisophthalate (Nip)]. The results of dielectric studies of 1 revealed that it possesses a high dielectric constant (κ=65.5 at 1 kHz), while compound 2 displayed an even higher dielectric constant (κ=110.3 at 1 kHz). The electron donating and withdrawing effects of the NH₂ and NO₂ substituents induce changes in the polarity of the polymers, which is due to the inductive effect from the aryl ring for both NO₂ and NH₂. Theoretical results from density functional theory (DFT) calculations, which also support the experimental findings, show that both compounds have a distinct electronic behavior with diverse wide bandgaps. The significance of the current work is to provide information about the structure-dielectric property relationships. So, this study promises to pave the way for further research on the effects of different functional groups on coordination polymers on their dielectric properties.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Exact solutions of solid-liquid phase-change heat transfer when subjected to convective boundary conditions

A closed-form expression is presented to find the location of solid-liquid interface motion in convection-dominated solidification and melting problems. In this regard, the solutions are expressed in terms of the generalized representations of error functions,E (u, v) andF (u, v), which are useful to heat-conduction problems with convective-type boundary conditions. It is demonstrated that for constant surface temperature, the interface solution reduces to the classical Neumann solution.     

Barium(II)–2,4‐dinitrophenolate–18‐crown‐6 at 183 K

The title compound, bis(2,4‐dinitrophenolato‐κ²O,O′)(1,4,7,10,13,16‐hexaoxadecane‐κ⁶O)barium(II), [Ba(C₆H₃N₂O₅)₂(C₁₂H₂₄O₆)], is a 1:1 complex of barium(II)–2,4‐di­nitro­phenolate and 1,4,7,10,13,16‐hexaoxa­cyclo­octa­decane (18‐crown‐6). Its structure is located on a crystallographic inversion centre. The temperature dependence of the crystal structure has been studied. The monoclinic β angle of the P2₁/­n space group increases with increasing temperature. The packing structure of the complex is stabilized by intermolecular C—H?O interactions.     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.     

Synthesis and antimycobacterial activity of some beta-carboline alkaloids

In view of the attributed medicinal properties of beta-carboline alkaloids, some new O-acyl derivatives of beta-carboline alkaloid--harmol, were prepared and tested for possible antimycobacterial activity against Mycobacterium tuberculosis H37Rv.     

Di‐2‐pyridyl ketone N4,N4‐(butane‐1,4‐diyl)thiosemicarbazone

The title compound, C₁₆H₁₇N₅S, is in the thione form and crystallizes with two independent mol­ecules in the asymmetric unit. In both mol­ecules, the penta­methyl­ene­imine five‐membered ring adopts an envelope conformation, and in one of the molecules this ring shows positional disorder. The thione S and hydrazine N atoms are in the Z configuration with respect to the C—N bond.     

Bis[1,1′‐bis(diphenylphosphino)ferrocenium] hexadecachlorotetraantimony(III) ethanol solvate

In the title compound, [Fe(C₁₇H₁₄P)₂]₂[Sb₄Cl₁₆]·C₂H₆O, the Fe atoms lie on inversion centres and the pairs of cyclopentadienyl rings are consequently in a fully staggered conformation. The centrosymmetric anionic clusters formed by [Sb₄Cl₁₆]^4? are surrounded by the cations and are held together by weak C—H?Cl interactions. These formations stack along the a axis to form columns, and the columns are interconnected by another weak C—H?Cl interaction along the b axis.     

Parametric study of catalytic reforming process?

Summary A parametric study of catalytic reforming process in a pilot plant was carried out by varying the pressure, H₂/HC ratio, and space velocity. The results show that lower aromatics and higher hydrogen yields can be accomplished by increasing the space velocity in existing reformers, which will also result in better C₅⁺yield.