Oxidation of Aromatic Amines to Quinones by Iodic Acid under Microwave Irradiation in the Presence of Montmorillonite K10 and Silica Gel

A variety of aromatic amines are oxidized to their corresponding quinones in excellent yields by supported iodic acid under microwave irradiation and solvent free conditions.     

An injectable chitosan-based hydrogel reinforced by oxidized nanocrystalline cellulose and mineral trioxide aggregate designed for tooth engineering applications

The complex anatomy of teeth limits the accessibility and efficacy of regenerative treatments. Therefore, the application of well-known inducers as injectable hydrogels for the regeneration of the dentin-pulp complex is considered a promising approach. In this regard, this study aimed to develop an injectable hydrogel containing mineral trioxide aggregate (MTA). The injectable chitosan/oxidized-nanocrystalline cellulose/MTA (CS/OCNC/MTA) hydrogels were prepared, and the physicochemical properties of these hydrogels were evaluated by TGA, FTIR, Rheological analysis, and SEM. Moreover, the effect of MTA on the swelling and degradability of scaffolds was assessed. The proliferative effects of synthesized hydrogels were also determined on human dental pulp stem cells (hDPSCs) by MTT assay. For induction of differentiation and biomineralization in these cells, the alkaline phosphatase activity and Alizarin Red S staining tests were performed in the presence of fabricated scaffolds. The proliferation of hDPSCs was significantly increased in the presence of these hydrogels. Moreover, the addition of MTA to hydrogel structure dramatically improved the differentiation of hDPSCs. These results suggested that this novel injectable hydrogel provides appropriate physiochemical properties and can be considered a promising scaffold for regenerative endodontic procedures.

Graphical abstract

     

A convenient and regioselective oxidative bromination of electron-rich aromatic rings using potassium bromide and benzyltriphenylphosphonium peroxymonosulfate under nearly neutral reaction conditions

Regioselective oxidative bromination of electron-rich aromatic rings has been studied using potassium bromide as a bromine source in the presence of benzyltriphenylphosphonium peroxymonosulfate as oxidant under nearly neutral reaction conditions. In most cases we obtained monobrominated derivatives regioselectively and in good to high yields without the aid of strong acids.     

Preparation and some properties of a polyethyleneimine-agarose metal adsorbent

An adsorbent for metal ions has been prepared by reacting high molecular weight polyethyleneimine (PEI) with a crosslinked and activated agarose gel, Novarose. The synthesis variables, i.e. time, temperature, pH, PEI concentration and PEI/Novarose ratio, were optimized in order to obtain a high metal binding capacity of the adsorbent. The binding capacity for Cu(2+) is 500 micromol/ml packed adsorbent. A number of properties of the adsorbent relevant for metal ion accumulation has been investigated for Cu(2+), Ni(2+), Cd(2+) and Zn(2+). Adsorption capacities, adsorption isotherms, distribution coefficients, recoveries and relative rates of accumulation were determined. The adsorbent can be used for preconcentration and for separation of interfering alkali and alkaline earth metals in analytical applications.     

Green synthesis of banana flavor using different catalysts: a comparative study of different methods

ABSTRACT

Esterification of isoamyl alcohol with acetic acid was studied using different ion-exchange resins, namely Amberlyst 15 dry, Amberlyst 16 wet, Amberlite 120-IR. Esterification was carried out using different esterification methods that are quite new (ohmic, ultrasonic probe, and ultrasonic bath) and the results were compared with microwave-assisted esterification (MAE). The highest isoamyl acetate yield (99%) was obtained by MAE, using a mixture of acetic acid and isoamyl alcohol (mole ratio of 1:2) after 2?h of reaction time. In this process, 2% Amberlyst 15 dry was used. MAE had the least specific energy consumption (0.42?kWh/g isoamyl acetate) and specific CO₂ emission (34?g/g isoamyl acetate). According to the images obtained by scanning electron microscopy, lower amounts of Amberlyst 15 dry beads were destroyed by MAE method compared to other esterification methods. In conclusion, MAE proved to be an economic and environmentally-friendly method for esterification of different flavoring compounds.     

Novel coated-graphite membrane sensor based on N,N′-dimethylcyanodiaza-18-crown-6 for the determination of ultra-trace amounts of lead

A novel selective membrane electrode for determination of ultra-trace amount of lead was prepared. The PVC membrane containing N,N′-dimethylcyanodiaza-18-cown-6 (DMCDA18C6) directly coated on a graphite electrode, exhibits a Nernstian response for Pb²⁺ ions over a very wide concentration range (from 1.0×10⁻² to 1.0×10⁻⁷ M) with a limit of detection of 7.0×10⁻⁸ M (∼14.5 ppb). It has a fast response time of ∼10 s and can be used for at least 2 months without any major deviation in potential. The electrode revealed very good selectivity with respect to all common alkali, alkaline earth, transition and heavy metal ions. The proposed sensor was used as an indicator electrode in potentiometric titration of lead ions and in determination of lead in edible oil, human hair and water samples. The proposed sensor was found to be superior to the best Pb²⁺-selective electrodes reported in terms of detection limit and selectivity coefficient.     

Homogeneous liquid-liquid extraction method for the selective separation and preconcentration of ultra trace molybdenum

A new simple and efficient homogeneous liquid-liquid extraction method for the selective separation and preconcentration of molybdenyl ions was developed. α-Benzoin oxime (ABO) was investigated as a complexing ligand, and perfluorooctanoate ion (PFOA⁻) was applied as a phase-separator agent under strongly acidic conditions. Under the optimal conditions ([ABO] = 2.1 × 10⁻³ M, [PFOA⁻] = 1.8 × 10⁻² M, [HNO₃] = 1.7 M, [acetone] = 11.8% (v/v)), 10 μg of molybdenum in 5 ml aqueous phase could be extracted quantitatively into 40 μl of the sedimented phase. The maximum concentration factor was 125-fold. Thiocyanate was applied as a chromogenic reagent for the direct spectrophotometric determination of molybdenum in the sedimented phase. The reproducibility of the proposed method is at the most 2.4%.The influence of the type and concentration of acid solution, the concentration of ABO, the type and volume of the water-miscible organic solvent, the concentration of PFOA⁻, and the effect of different diverse ions on the extraction and determination of molybdenum(VI) were investigated. The proposed method was applied to the extraction and determination of molybdenum(VI) in natural water, Spinach, and Lucerne samples. A satisfactory agreement exists between the results obtained by the proposed method and those reported by GF-AAS.     

Vector and Cell Line Engineering Technologies Toward Recombinant Protein Expression in Mammalian Cell Lines

The rapid growth of global biopharmaceutical market in the recent years has been a good indication of its significance in biotechnology industry. During a long period of time in recombinant protein production from 1980s, optimizations in both upstream and downstream processes were launched. In this regard, one of the most promising strategies is expression vector engineering technology based on incorporation of DNA opening elements found in the chromatin border regions of vectors as well as targeting gene integration. Along with these approaches, cell line engineering has revealed convenient outcomes in isolating high-producing clones. According to the fact that more than 50% of the approved therapeutic proteins is being manufactured in mammalian cell lines, in this review, we focus on several approaches and developments in vector and cell line engineering technologies in mammalian cell culture.     

A new design of the elimination and choice translating reality method for multi-criteria group decision-making in an intuitionistic fuzzy environment

The purpose of this paper is to design a new extension of the ELECTRE, known as the elimination and choice translating reality method, for multi-criteria group decision-making problems based on intuitionistic fuzzy sets. This method is widely utilized when a set of alternatives should be identified and evaluated with respect to a set of conflicting criteria by reflecting decision makers’ (DMs’) preferences. However, handling the exact data and numerical measure is difficult to be precisely focused because the DMs’ judgments are often vague in real-life decision problems and applications. A more realistic and practical approach can be to use linguistic variables expressed in intuitionistic fuzzy numbers instead of numerical data to model DMs’ judgments and to describe the inputs in the ELECTRE method. The proposed intuitionsitic fuzzy ELECTRE utilizes the truth-membership function and non-truth-membership function to indicate the degrees of satisfiability and non-satisfiability of each alternative with respect to each criterion and the relative importance of each criterion, respectively. Then, a new discordance intuitionistic index is introduced, which is extended from the concept of the fuzzy distance measure. Outranking relations are defined by pairwise comparisons and a decision graph is depicted to determine which alternative is preferable, incomparable or indifferent in the intuitionistic fuzzy environment. Finally, a comprehensive sensitivity analysis is employed to further study regarding the impact of threshold values on the final evaluation, and a comparative analysis is demonstrated with an application example in flexible manufacturing systems between the proposed ELECTRE method and the existing intuitionistic fuzzy technique for order preference by similarity to ideal solution (IF-TOPSIS) method.