Mesure invariante pour l’équation stochastique d’un modéle de compétition limitée entre des espéces avec une diffusion spatiale

On considére l’équation stochastique decrivant un systéme den espéces avec une perturbation stochastique du type environnemental et une diffusion dans un territoire de chaque espéce. On suppose la compétition avec un effet limité entre le espéces différentes, tandis que l’effet logistique pour chaque espéce est supposé quadratique. Sous une condition convenable pour les coefficients, on démontre l’existence d’une mesure invariante pour cette équation stochastique, oú la densité de population de chaque espéce est presque surement positive.      

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

Fluorescence Interaction and Determination of Sulfathiazole with Trypsin

The mechanism of interaction of trypsin with the sulfathiazole was studied through using fluorescence quenching and UV-visible absorption spectra at pH 7.4. The Stern-Volmer quenching constants, binding constants, number of binding sites and the corresponding thermodynamic parameters ΔH^o, ΔS^o and ΔG^o were calculated at different temperatures. The effect of common metal ions on the constants was also discussed. The results suggest that sulfathiazole can interact strongly trypsin and that there is the formation of trypsin-sulfathiazole complex and the interaction can be explained on the basis of hydrogen bonds and van der Waals forces. The binding distance (r) between the donor (trypsin) and acceptor (sulfathiazole) was 3.52 nm based on the Förster’s non-radiative energy transfer theory. The detection and quantification limits of sulfathiazole were calculated as 2.52 and 8.40 μM in the presence of trypsin, respectively. The relative standard deviation (RSD) was 4.086 % for determinations (n?=?7) of a sulfathiazole solution with the concentration of 7.54 μM.     

Unusual products in the reactions of hexachlorocyclotriphosphazatriene with sodium aryloxides

Reactions of hexachlorocyclotriphosphazatriene, N₃P₃Cl₆ 1 , with sodium aryloxides have been studied. Compound 1 was found to react by the nucleophilic substitution pathway to yield monocyclophosphazenes [N₃P₃Cl₆(OC₆H₂Bu¹₃-2,4,6) 5 and N₃P₃Cl₄(OC₆H₂Me-4-Bu¹₂-2,6)₂ 6 ] and bi(cyclophosphazenes) ([Cl₅N₃P₃-P₃N₃Cl₄(OC₆H₃Bu¹₂-2,6)] 7 and [N₃P₃(OC₆H₃Bu¹₂-2,6)₅]₂ 8 ). The unusual bi(cyclophosphazenes) 7 and 8 are the first examples of two cyclotriphosphazene rings linked by a P(SINGLE BOND)P bond [2.193 (2) Å], which have been obtained by reacting 1 with ArONa. The structures of compounds 5–8 are ascertained by elemental analyses, ¹H-, ³¹P-¹³C-NMR, IR, and MS spectra. The molecular structure of monocyclic-phosphazene 5 was determined by X-ray diffraction techniques for further structural assignment. It crystallizes in the monoclinic space group P2₁/m with a = 6.144(2), b = 17.079(9), c = 13.181(9) Å, β = 92.79(7), and Z = 2, R = 0.074. Compound 5 is on a crystallographic mirror plane, and there is only a half molecule in the asymmetric unit. © 1996 John Wiley & Sons, Inc.     

Mathematical Modelling of Glyphosate Molecularly Imprinted Polymer-Based Microsensor with Multiple Phenomena

The massive and careless use of glyphosate (GLY) in agricultural production raises many questions regarding environmental pollution and health risks, it is then important to develop simple methods to detect it. Electrochemical impedance spectroscopy (EIS) is an effective analytical tool for characterizing properties at the electrode/electrolyte interface. It is useful as an analytical procedure, but it can also help in the interpretation of the involved fundamental electrochemical and electronic processes. In this study, the impedance data obtained experimentally for a microsensor based on molecularly imprinted chitosan graft on 4-aminophenylacetic acid for the detection of glyphosate was analyzed using an exact mathematical model based on physical theories. The procedure for modeling experimental responses is well explained. The analysis of the observed impedance response leads to estimations of the microscopic parameters linked to the faradic and capacitive current. The interaction of glyphosate molecules with the imprinted sites of the CS-MIPs film is observed in the high frequency range. The relative variation of the charge transfer resistance is proportional to the log of the concentration of glyphosate. The capacitance decreases as the concentration of glyphosate increases, which is explained by the discharging of the charged imprinted sites when the glyphosate molecule interacts with the imprinted sites through electrostatic interactions. The phenomenon of adsorption of the ions in the CMA film is observed in the low frequency range, this phenomenon being balanced by the electrostatic interaction of glyphosate with the imprinted sites in the CS-MIPs film.     

Mechanism of antioxidant capacity assays and the CUPRAC (cupric ion reducing antioxidant capacity) assay

We report on the application of a simple and versatile antioxidant capacity assay for dietary polyphenols, vitamin C and vitamin E utilizing the copper(II)-neocuproine (Cu(II)-Nc) reagent as the chromogenic oxidant, which we term the CUPRAC (cupric reducing antioxidant capacity) method. It involves mixing the antioxidant solution (directly or after acid hydrolysis) with solutions of CuCl₂, neocuproine, and ammonium acetate at pH 7, and measuring the absorbance at 450 nm after 30 min. Slowly reacting antioxidants required an incubation at 50 °C for 20 min for color development. The flavonoid glycosides were hydrolyzed to their corresponding aglycones by refluxing in 1.2 M HCl-containing 50% MeOH for fully exhibiting their antioxidant potencies. Certain compounds also needed incubation after acid hydrolysis for color development. The CUPRAC absorbances of mixture constituents were additive, indicating lack of chemical deviations from Beer’s law. The CUPRAC antioxidant capacities of a wide range of polyphenolics are reported in this work and compared to those found by ABTS/persulfate and Folin assays. The trolox-equivalent capacities of the antioxidants were linearly correlated (r = 0.8) to those found by ABTS but not to those of Folin. The highest antioxidant capacities in the CUPRAC method were observed for epicatechin gallate, epigallocatechin gallate, quercetin, fisetin, epigallocatechin, catechin, caffeic acid, epicatechin, gallic acid, rutin, and chlorogenic acid in this order, in accordance with theoretical expectations. The experiences of other CUPRAC users also are summarized. Correspondence: Reşat Apak, Department of Chemistry, Faculty of Engineering, Istanbul University, Avcilar, TR-34320 Istanbul, Turkey     

Small amplitude dust-acoustic soliton energy in dusty plasmas with suprathermal polarization force

The effect of suprathermal polarization force on both linear and weakly nonlinear dust-acoustic solitary structures in a three-component dusty plasma is investigated. For this purpose, a new expression of the polarization force acting on dust particles that include the electronic suprathermal effect is derived. The results are applied to two different experimental dusty plasmas. We have found that the polarization force acting on the dust grains decreases as the electron suprathermality becomes more significant. In addition, we have shown that, for a given value of the spectral index κ , the polarization force magnitude fluctuates from one plasma to another. The changes arising in the propagation of small-amplitude dust-acoustic (DA) solitons due to the presence of this suprathermal polarization force are also analysed. Interestingly, an increase in the magnitude of the polarization force leads to an increase in the amplitude and width of DA soliton and provides more energy to the motion of this soliton.     

Microemulsion high performance liquid chromatography method for the determination of ibuprofen in the presence of preservatives and impurities in oral pediatric suspension

A simple and rapid isocratic oil-in-water microemulsion HPLC method (MELC) has been developed for the analysis of ibuprofen in oral suspension formulation. The method was optimized for simultaneous separation and determination of Ibuprofen and its related compound C (Imp C), sodium benzoate, methylparaben, propylparaben and their related compound A (Imp A). The optimum conditions were achieved by testing several columns and mobile phase compositions, while the chromatographic parameters (retention time, plate number, tailing factor and resolution) were measured. The six compounds were successfully separated within a run time of 14 min, using Eurospher II C18 (150 mm × 4.6 mm i.d., 5 µm) at ambient temperature, a mobile phase made of 5.0 g SDS, 6.6 g butan-1-ol, 0.8 g n-heptane in 100 mL of 0.05% TFA. Flow rate was fixed to 1 mL min^?1 and wavelength detection to 254 nm. The same phase was used in UHPLC and monolithic columns. A rapid comparison of system suitability between the three methods was made. The HPLC method was validated following ICH guidelines in terms of selectivity, linearity, accuracy and precision. The developed method was successfully applied to a commercial pharmaceutical formulation which shows that it can be used for routine analysis.     

Influence of Mn incorporation on the structural and optical properties of sol gel derived ZnO film

Undoped and manganese doped ZnO (ZnO:Mn) films were prepared by sol gel method using spin coating technique. The effect of Mn incorporation on the structural and optical properties of the ZnO film has been investigated. The crystalline structure and orientation of the films have been investigated by using their X-ray diffraction spectra. The films exhibit a polycrystalline structure. Mn incorporation led to substantial changes in the structural characteristics of the ZnO film. The scanning electron microscopy (SEM) images of the films showed that the surface morphology of the ZnO film was affected by the Mn incorporation. The transparency of the ZnO film decreased with the Mn incorporation. The optical band gap and Urbach energy values of the ZnO and ZnO:Mn films were found to be 3.22, 3.19 eV and 0.10, 0.23 eV, respectively. The optical constants of these films, such as refractive index, extinction coefficient and optical dielectric constants were determined using transmittance and reflectance spectra. The refractive index dispersion curve of the films obeys the single oscillator model with dispersion parameters. The oscillator energy, E _o , and dispersion energy, E _d, of the films were determined 5.30 and 16.26 eV for ZnO film and 5.80 and 12.14 eV for ZnO:Mn film, respectively.