Efficient method for the direct preparation of aryl carboxylates from carboxylic acids using tosyl chloride under solvent-free conditions

A simple, clean and efficient solvent-free procedure for the preparation of aryl carboxylates is described from the direct reaction of carboxylic acids and phenols, in the presence of 1-methylimidazole as base and tosyl chloride (TsCl) as coupling agent. This method can be easily applied for different substituted phenols and carboxylic acids. It can also be applied for the selective acylation when other functional group such as hydroxyl is present on phenol ring.     

Phosphorus Pentachloride (PCl5) Mediated Synthesis of Tetraarylporphyrins

A new synthesis of porphyrins from pyrrole and substituted benzaldehydes is described, with PCl₅ as catalyst. Aromatic aldehydes condense irreversibly with pyrrole in the presence of this catalyst, and aerobic oxidation of porphyrinogen provides functionalized porphyrins in yields of 20–65%.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.     

A mixed‐ligand quinazoline‐based Ni(II) Schiff base complex: Synthesis,characterization, crystal structure,antimicrobial investigation and catalytic activity for the synthesis of 2H–indazolo[2,1‐b]phthalazine‐triones

A tridentate Schiff base ligand, (E)‐3‐((2‐hydroxy‐3‐methoxybenzylidene)amino)‐2‐methylquinazolin‐4(3H)‐one [HL], and its mixed‐ligand Ni(II) complex [Ni(L)(imi)], were synthesized and fully characterized using elemental analysis, FT‐IR, UV–Vis and ¹HNMR spectroscopy techniques. The structure of the synthesized ligand and complex was determined with single crystal X‐ray diffraction method. In the complex, a square planner geometry was observed around the Ni(II) central atom coordinated with the donor atoms of the Schiff base ligand and one nitrogen of imidazole group. In addition, the catalytic activity of the complex on the three‐component condensation of hydrazine hydrate with phthalic anhydride and dimedone to obtain 2H–indazolo[2,1‐b]phthalazine‐triones was investigated. Furthermore, in‐vitro antimicrobial studies were performed that indicated the great antibacterial activities of the Ni(II) complex against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Bacillus cereus bacteria.     

Synthesis,characterization and application of 3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate as nanostructured catalyst for the tandem reaction of β‐naphthol with aromatic aldehydes and amide derivatives

3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate {[Msim]FeCl₄} was prepared and fully characterized by fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDX) and vibrating sample magnetometer (VSM) and used, as an efficient catalyst, for the tandem reaction of β‐naphthol with aromatic aldehydes and benzamide at 110 °C under solvent‐free conditions to give 1‐amidoalkyl‐2‐naphthols in high yields and very short reaction times.     

Preparation of magnetic polyurethane rigid foam nanocomposites

Super paramagnetic Fe₃O₄@SiO₂ nanoparticle was incorporated into polyurethane rigid foams in order to prepare new corresponded magnetic nanocomposite foams via one-shot method. The core–shell-structured nanoparticles were prepared by sol–gel method and characterized by transmission electron microscopy, X-ray diffraction, as well as Fourier transform infrared spectroscopy techniques. Magnetic nanoparticles were used up to 3 % in the foam formulations and the samples prepared successfully. Thermal, mechanical, and magnetic properties of nanocomposites were studied and the results showed superior properties in comparison with pristine foams.     

Lignin as a Partial Polyol Replacement in Polyurethane Flexible Foam

This study was focused on evaluating the suitability of a wide range of lignins, a natural polymer isolated from different plant sources and chemical extractions, in replacing 20 wt.% of petroleum-based polyol in the formulation of PU flexible foams. The main goal was to investigate the effect of unmodified lignin incorporation on the foam’s structural, mechanical, and thermal properties. The hydroxyl contents of the commercial lignins were measured using phosphorus nuclear magnetic resonance (³¹P NMR) spectroscopy, molar mass distributions with gel permeation chromatography (GPC), and thermal properties with differential scanning calorimetry (DSC) techniques. The results showed that incorporating 20 wt.% lignin increased tensile, compression, tear propagation strengths, thermal stability, and the support factor of the developed PU flexible foams. Additionally, statistical analysis of the results showed that foam properties such as density and compression force deflection were positively correlated with lignin’s total hydroxyl content. Studying correlations between lignin properties and the performance of the developed lignin-based PU foams showed that lignins with low hydroxyl content, high flexibility (low T_g), and high solubility in the co-polyol are better candidates for partially substituting petroleum-based polyols in the formulation of flexible PU foams intended for the automotive applications.     

Studying the Suitability of Nineteen Lignins as Partial Polyol Replacement in Rigid Polyurethane/Polyisocyanurate Foam

In this study, nineteen unmodified lignins from various sources (hardwood, softwood, wheat straw, and corn stover) and isolation processes (kraft, soda, organosolv, sulfite, and enzymatic hydrolysis) were used to replace 30 wt.% of petroleum-based polyol in rigid polyurethane/polyisocyanurate (PUR/PIR) foam formulations. Lignin samples were characterized by measuring their ash content, hydroxyl content (Phosphorus Nuclear Magnetic Resonance Spectroscopy), impurities (Inductively Coupled Plasma), and pH. After foam formulation, properties of lignin-based foams were evaluated and compared with a control foam (with no lignin) via cell morphology, closed-cell content, compression strength, apparent density, thermal conductivity, and color analysis. Lignin-based foams passed all measured standard specifications required by ASTM International C1029-15 for type 1 rigid insulation foams, except for three foams. These three foams had poor compressive strengths, significantly larger cell sizes, darker color, lower closed-cell contents, and slower foaming times. The foam made with corn stover enzymatic hydrolysis lignin showed no significant difference from the control foam in terms of compressive strength and outperformed all other lignin-based foams due to its higher aliphatic and p-hydroxyphenyl hydroxyl contents. Lignin-based foams that passed all required performance testing were made with lignins having higher pH, potassium, sodium, calcium, magnesium, and aliphatic/p-hydroxyphenyl hydroxyl group contents than those that failed.     

Evaluation of Phoma sp. Biomass as an Endophytic Fungus for Synthesis of Extracellular Gold Nanoparticles with Antibacterial and Antifungal Properties

The aim of our study was to examine the different concentrations of AuNPs as a new antimicrobial substance to control the pathogenic activity. The extracellular synthesis of AuNPs performed by using Phoma sp. as an endophytic fungus. Endophytic fungus was isolated from vascular tissue of peach trees (Prunus persica) from Baft, located in Kerman province, Iran. The UltraViolet-Visible Spectroscopy (UV–Vis spectroscopy) and Fourier transform infrared spectroscopy provided the absorbance peak at 526 nm, while the X-ray diffraction and transmission electron microscopy images released the formation of spherical AuNPs with sizes in the range of 10–100 nm. The findings of inhibition zone test of Au nanoparticles (AuNPs) showed a desirable antifungal and antibacterial activity against phytopathogens including Rhizoctonia solani AG1-IA (AG1-IA has been identified as the dominant anastomosis group) and Xanthomonas oryzae pv. oryzae. The highest inhibition level against sclerotia formation was 93% for AuNPs at a concentration of 80 μg/mL. Application of endophytic fungus biomass for synthesis of AuNPs is relatively inexpensive, single step and environmentally friendly. In vitro study of the antifungal activity of AuNPs at concentrations of 10, 20, 40 and 80 μg/mL was conducted against rice fungal pathogen R. solani to reduce sclerotia formation. The experimental data revealed that the Inhibition rate (RH) for sclerotia formation was (15, 33, 74 and 93%), respectively, for their corresponding AuNPs concentrations (10, 20, 40 and 80 μg/mL). Our findings obviously indicated that the RH strongly depend on AuNPs rates, and enhance upon an increase in AuNPs rates. The application of endophytic fungi biomass for green synthesis is our future goal.