Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Synthesis, electrical and thermal properties of Bi4V2−xMexO11 (x = 0.0 and 0.02) ceramics

Polycrystalline ceramic samples of Bi₄V_2?xMe_xO₁₁ (Me = Nb, Zr, Y and Cu and x = 0.0 and 0.02) have been synthesized by standard solid state reaction method using high purity oxides. The formation of the compounds have been analysed by X-ray diffraction method. The dielectric constant, dielectric loss and AC conductivity as a function of frequency and temperature have been measured. The dielectric studies indicate that the material is highly lossy and hence its AC conductivity increases with the increase of temperature. The DC conductivity of material has been measured as a function of temperature from room temperature to 380 °C and its activation energy was calculated using the relation σ = σ ₀exp (?E _a/kT). The modulated differential scanning calorimetry has been used to investigate the effect of substitution on the heat capacity and heat flow of the compounds. The results are discussed in detail.     

Theoretical investigation of the molecular structure,vibrational spectra,and molecular docking of tramadol using density functional theory

The optimized molecular structures, harmonic vibrational wavenumbers, and the corresponding vibrational assignments of (1S,2S)-tramadol and (1R,2R)-tramadol are computationally examined using the B3LYP density functional theory method together with the standard 6–311++G(d,p) and def2-TVZP basis sets. The optimized structures show that phenolic rings of both 1R,2R and 1S,2S tramadol adopt planar geometry, which are slightly distorted due to the substitution at the meta-position; and the six-membered cyclohexane adopts a slightly distorted chair conformation. The 1S,2S enantiomer is energetically more favorable than 1R,2R with the energy differences of 1.32 and 1.03 kcal/mol obtained at B3LYP/6–311++G(d,p) and B3LYP/Def2-TVZP levels, respectively. The analysis of the binding pocket in the silico molecular docking with the m-opioid receptor shows that it originated two clusters with the 1S,2S enantiomer and one cluster with the 1R,2R enantiomer of tramadol. The results point to a more stable complex of the m-opioid receptor with the 1R,2R enantiomer of tramadol.     

Low temperature survival of slender naiad (Najas flexilis) seeds

The response to drying and storage at -20 degrees C or in liquid nitrogen was studied in seeds of the freshwater aquatic plant Najas flexilis. The seeds of this species show some desiccation sensitivity, although post-harvest storage in water at 16 degrees C resulted in improvements in desiccation tolerance. There was 63% germination of seeds dried to 9.5% moisture content (30% RH) following this maturation period. Optimum moisture contents for seeds stored at -20 degrees C for 3 months and in liquid nitrogen for 1 week were ~11% and ~15%, respectively.     

Investigation into the rotational bands of ~(185)Pt with the particle-rotor model

Theoretical calculations have been performed for the ν9/2+[624](i13/2) and ν7/2-[503](f7/2) bands of 185Pt in the framework of particle-rotor model. The band properties of signature splitting and configuration mixing have been analyzed. The level energy and signature splitting before the band crossing can be well interpreted by introducing triaxiality. The positive-parity yrast band is pro posed to be dominated by the ν9/2+[624](i13/2) component, while the negative-parity band shows strong mixing of ν7/2-[5...     

Synthesis, structural and electrical properties of La and Nb modified Bi4Ti3O12 ferroelectric ceramics

Polycrystalline ceramic samples of Bi_4−xLa_xTi₃O₁₂ (x=0.0, 0.5 and 1) and Bi_3.5La_0.5Ti_3−yNb_yO₁₂ (y=0.02 and 0.04) have been synthesized by standard high temperature solid state reaction method using high purity oxides and carbonates. The effect of lanthanum doping on Bi-site and Nb doping on Ti-site on the structural and electrical properties of Bi₄Ti₃O₁₂ powders was investigated by X-ray diffraction, scanning electron microscopy, dc conductivity and dielectric studies. A better agreement between the observed and calculated X-ray diffraction pattern was obtained by performing the Rietveld refinement with a structural model using the non-centrosymmetric space group Fmmm in all the cases. A better agreement between observed and calculated d-values also shows that the lattice parameters calculated using the Rietveld refinement analysis are better. The increase in lanthanum and niobium contents does not lead to any secondary phases. It is found that La³⁺ doping reduces the material grain size and changes its morphology from the plate-like form to a spherical staking like form. The substitution of Nb for Ti ions affected the degree of disorder and modified the dielectric properties leading to more resistive ceramic compounds. The shape and size of the grains are strongly influenced by the addition of niobium to the system. The activation energies of all the compounds were calculated by measuring their dc electrical conductivities. The frequency and temperature dependent dielectric behavior of all the compounds have also been studied and the results are discussed in detail. The substitution of La and Nb on the Bi and Ti sites decreased the T_c and improved the dielectric and ferroelectric behavior.     

Measurement of στ product of solid state laser materials by an alternative method: Application to Nd3+ doped YVO4 crystal for 4 F 3/2→4 I 11/2 transition

In this paper an alternative approach for measurement of στ product for ⁴ F _3/2→⁴ I _11/2 transition of Nd³⁺ doped YVO₄ crystal is reported. In this method a microchip laser is formed by keeping a small piece of the sample in plane-plane resonator and a diode laser (808 nm) is used for pumping. The pump power induced thermal lensing effect is used to make the cavity stable. The cavity mode area is estimated by measuring the thermal lens focal length at the threshold and the average pump area is measured by Gaussian fit to the intensity profiles of the pump beam. The value of στ product of Nd:YVO₄ crystal obtained by this method is within 10% of the reported values. The advantage of this method is that it is a simple method for direct measurement of στ product of laser crystals.