Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Kristallstrukturbestimmung von NaHC2O4 · H2O

NaHC₂O₄ · H₂O crystallizes in space group P 1 with a₀ = 6,51, b₀ = 6,66, c₀ = 5,70 Å, α₀ = 95,0°, β₀ = 109,8°, γ₀ = 74,9° and Z = 2. The structure was solved by direct methods. The refinement was carried out with 679 reflections to R₁ = 7,7%. The angle between the O? C? O planes is 12,6°.     

Simultaneous determination of midazolam and its three hydroxy metabolites in human plasma by electron-capture gas chromatography without derivatization

Electron-capture gas chromatography was carried out to determine midazolam and its three hydroxy metabolites (1-hydroxymethylmidazolam, 4-hydroxymidazolam and 1-hydroxymethyl-4-hydroxymidazolam) in human plasma. The assay involves extraction from plasma, buffered to pH 9.3, into cyclohexane-dichloromethane (6:4) and analysis by gas chromatography. The use of an HP-17 cross-linked, capillary column makes derivatization unnecessary. The sensitivity of the method was 2-3 ng/ml for midazolam, 1-hydroxymethylmidazolam and 4-hydroxymidazolam, and 20 ng/ml for 1-hydroxymethyl-4-hydroxymidazolam. The extraction recovery of midazolam, 1-hydroxymethylmidazolam, 4-hydroxymidazolam and 1-hydroxymethyl-4-hydroxymidazolam was 99.3 +/- 2.4, 67.0 +/- 4.6, 92.7 +/- 4.7 and 28.7 +/- 6.3%, respectively. This gas chromatographic assay was used to assess the concentration-time profiles of midazolam and its metabolites in human plasma after rectal and intravenous administration of midazolam.     

Implementation and use of the method of prudent ascent in conformational analysis using molecular mechanics

In two-dimensional conformational analysis the current practice is to perform an energy minimization for all possible combinations of two dihedral angles in the molecule, in a fixed order, and apply a certain dihedral angle step-size. A newly developed method is presented in which the order of the evaluation points on the energy-surface is not fixed, but is dependent on all previous results in a way which we call “the method of prudent ascent.” In this method the most promising calculation is carried out first, thus minimizing the risk of atomic collisions. In order to be able to take care of the many additional degrees of conformational freedom present in, e.g., carbohydrate molecules, all minimizations are performed using a set of different promising starting conformations on the basis of previous calculations, and only the lowest energy result for each point is saved. An application of the method to conformational analysis of methyl-cellobiose and the artificial sweetener trichlorogalactosucrose is also presented.     

Design and application of dielectric distributed Bragg back reflector in thin-film silicon solar cells

A dielectric distributed Bragg reflector (DBR) formed by four pairs of hydrogenated amorphous silicon/silicon nitride layers is used as the back reflector in thin-film silicon solar cells. The DBR was designed to perform in a broad wavelength range with the peak reflectance at 600 nm. The DBR was fabricated at low substrate temperature (172 °C) and applied at the rear side of flat and textured amorphous silicon single-junction solar cells in both superstrate (pin) and substrate (nip) configurations. The spectral response and electrical I–V characteristics were measured. Solar cells with optimized DBR exhibit an enhanced external quantum efficiency in the long wavelength range and the electrical performance is comparable to solar cells having conventional Ag back reflector.     

Low‐Transition‐Temperature Mixtures (LTTMs): A New Generation of Designer Solvents

A new generation of designer solvents emerged in the last decade as promising green media for multiple applications, including separation processes: the low‐transition‐temperature mixtures (LTTMs). They can be prepared by mixing natural high‐melting‐point starting materials, which form a liquid by hydrogen‐bond interactions. Among them, deep‐eutectic solvents (DESs) were presented as promising alternatives to conventional ionic liquids (ILs). Some limitations of ILs are overcome by LTTMs, which are cheap and easy to prepare from natural and readily available starting materials, biodegradable, and renewable.