Electrospray mass spectrometry of methanol and water solutions suppression of electric discharge with SF6 gas

An equation by D. P. H. Smith predicts the capillary voltage required for the onset of electrospray (ES). For different solvents the voltage increases with the square root of the surface tension. Water requires a potential that is 1.8 times higher than that for methanol. This is verified experimentally. The higher potential required for water leads to ES in the presence of corona electric discharge. For low total ES plus corona currents, the electrosprayed analyte ion intensity is not adversely affected by the presence of discharge. At high total currents, there is a large decrease of analyte sensitivity. The sensitivity decrease is probably due to adverse space charge effect at high currents. The discharge can be suppressed by adding sulfur hexafluoride to the ambient gas. Both sensitivity and signal stability are improved. However, the sensitivity still remains lower by a factor of ≈ 4 relative to that observed with methanol. This is attributed to lower efficiency of gas-phase ion formation from charged water, relative to methanol, droplets.     

The synthesis of 5-acyl-4-aryl(alkyl)-2-aryl-1,2,3-triazole 1-oxides by lead tetraacetate oxidation of mono- and bisarylhydrazones of α-hydroxyimino-β-diketones

The synthesis and lead tetraacetate oxidation of the title mono- and bis-arylhydrazones to the corresponding 5-acyl-4-aryl(alkyl)-2-aryl-1,2,3-triazole 1-oxides is described.     

Neutronenbeugungsuntersuchungen der magnetischen Struktur von TmCo3

The magnetic structure of the intermetallic TmCo₃ compound, determined by neutron diffraction measurements at 4.2 K on a powder sample, is colinear to the hexagonal c-axis, with the magnetic moments of Tm- and Co-ions being antiparallel coupled. The saturation moments have been found to beµ(Tm)=6.5µ _B andµ(Co)=0.8µ _B . The calculated magnetic moment of the Tm-ion by crystal field theory, based on a point charge model, is that of the free Tm³⁺ ion.     

Magnetismus in den intermetallischen SEAu3-Verbindungen (SE=Gd,Tb, Dy,Ho, Er und Tm)

The relation between inner displacement and strain is established and simplified by group theory. Results are given for the diamond structure (C, Ge, Si), cobalt (Co), graphite (C), neodymium (Nd), spinel (MgAl₂O₄). For these crystals we get an enormous reduction of the number of parameters to be determined by measurement.     

Ion-trap tandem mass spectrometry-based analytical methodology for the determination of polychlorinated biphenyls in fish and shellfish. Performance comparison against electron-capture detection and high-resolution mass spectrometry detection

Optimization of the Varian Saturn 2200 ion-trap tandem mass spectrometry (IT-MS/MS) system and comparison of its data quality with two other detection methods [electron-capture detection (ECD) and high-resolution mass spectrometry (HRMS)] was pursued by measuring polychlorinated biphenyls (PCBs) levels in fish and shellfish samples. IT-MS/MS methodology provided limits of detection (LOD) comparable to those obtained by ECD but superior specificity for the detection of a selected number of 39 PCB native congeners and 9 (13)C-labelled PCB standards. The method detection limits (MDLs) established for IT-MS/MS ranged between 1.0 and 5.0 pg/g on a wet weight basis while those obtained by ECD and HRMS were 1.0-4.0 pg/g and 0.1-2.0 pg/g, respectively. Overall, the results obtained in the study demonstrate that gas chromatography (GC) combined with IT-MS/MS provide higher data quality than those achievable by GC-ECD. For this particular set of target analytes the specificity achievable with IT-MS/MS was comparable to that obtained by HRMS and both techniques provided comparable data in terms of accuracy and precision.     

Electrospray ionization of alkali and alkaline earth metal species. Electrochemical oxidation and pH effects

The utility of electrospray ionization mass spectrometry (ESI-MS) for characterizing dissolved metal species has generated considerable interest in the use of this technique for metal speciation. However, the development of accurate speciation methods based on ESI-MS requires a detailed understanding of the mechanisms by which dissolved metal species are ionized during electrospray. We report how the analysis of alkali and alkaline earth metal species provides new information about some of the processes that affect electrospray ion yield. Selected metal ions and organic ligands were combined in 50 : 50 water-acetonitrile buffered with acetic acid or ammonium acetate and analyzed by flow injection ESI-MS using mild electrospray conditions. Species formed by alkali metal ions with thiol and oxygen-donating ligands were detected in acidic and neutral pH solutions. Electrochemical oxidation of N, N-diethyldithiocarbamate and glutathione during electrospray was indicated by detection of the corresponding disulfides as protonated or alkali metal species. The extent of ligand oxidation depended on solution pH and the dissociation constant of the thiol group. Tandem mass spectrometric experiments suggested that radical cations such as [NaL](+.) (where L=N,N-diethyldithiocarbamate) can be generated by in-source fragmentation of disulfide species. Greater complexation of alkali metals at neutral pH was indicated by a corresponding decrease in the relative abundance of the free metal ion. The number of alkali metal ions bound by glutathione and phthalic acid also increased with increasing pH, in accordance with thermodynamic equilibrium theory. Alkaline earth metal species were detected only in acidic solutions, the absence of 8-hydroxyquinoline complexes being attributed to their relative instability and subsequent dissociation during electrospray. Hence, accurate speciation by ESI-MS depends on experimental conditions and the intrinsic properties of each analyte. Copyright 2000 John Wiley & Sons, Ltd.     

Ultra-trace determination of aquaculture chemotherapeutants and degradation products in environmental matrices by LC-MS/MS

Two of the most common products currently used to control parasitic sea lice in fin fish aquaculture, salmon in particular, are Slice® and AlphaMax®. Emamectin benzoate (EB) is the active ingredient in Slice® and deltamethrin is the active ingredient in AlphaMax®. Several analytical methods have been developed for the determination of the active ingredients in these products but these have been focused on specific matrices and lack the sensitivity and versatility required in environmental monitoring. Here we present a validated, versatile, and simple analytical method for the determination of EB, its desmethyl degradation product (AB), and deltamethrin in a wide range of environmental matrices (sea water, marine sediment, and tissue). Sediments and tissues were extracted by accelerated solvent extraction (ASE®) and sample cleanup was achieved by solid phase extraction (SPE) while sea water was extracted using SPE disks. Analyte identification and quantification was based on liquid chromatography tandem mass spectrometry (LC-MS/MS) instrumentation with electrospray ionization, and multiple reaction monitoring (MRM). Method detection limits for the target analytes was in the parts per trillion (pg?g^?1) level for tissue and sediment and parts per quadrillion (pg?L^?1) for water. Except for deltamethrin in sea water, method performance in terms of analyte recoveries was better than 60%, and the method precision was RSD<20%. The method was used to determine EB and AB concentrations in water, sediment and prawn tissue samples collected near salmon aquaculture sites treated with Slice®. A distinct concentration gradient was observed in the immediate vicinity (within 50 to 100?m radius) of the salmon aquaculture sites where EB was detected at low ng?g^?1 levels for tissue (EB ranged from 0.041 to 3.0?ng?g^?1) and sediment (EB ranged from 0.051 to 35?ng?g^?1) and pg?L^?1 levels (EB ranged from 3 to 209?pg?L^?1) for water samples.     

Study on particle removal efficiency of an impinging jet by an image-processing method

 An image-processing method is proposed to obtain the distribution of the removal efficiency of particles on a plate by an air jet. This method can be used to measure particle removal from a flat surface by processing the image of the reflected light from the surface. Factors affecting the particle removal efficiency such as air pressure, distance between the nozzle and the impinging surface and the impinging angle are discussed. Optimal conditions are determined to obtain the most effective particle removal by the air jet. Received: 10 April 2001 / Accepted: 2 August 2001     

The onset of coulomb explosions in polyatomic molecules

With the development of high intensity femtosecond lasers, the ionisation and dissociation dynamics of molecules has become an area of considerable interest. Using the technique of femtosecond laser mass spectrometry (FLMS), the molecules carbon disulphide, pyrimidine, toluene, cyclohexanone and benzaldehyde are studied with pulse widths of 50 fs in the near infrared (IR) wavelength region (790 nm). Results are presented and contrasted for laser beam intensities around 10(15) and 10(16) W cm(-2). For the lower intensities, the mass spectra yield dominant singly charged parent ions. Additionally, the appearance of doubly charged parent ions is evident for carbon disulphide, toluene and benzaldehyde with envelopes of doubly charged satellite species existing in these local regions. Carbon disulphide also reveals a small triply charged component. Such atomic-like features are thought to be a strong fingerprint of FLMS at these intensities. However, upon increasing the laser intensity to approximately 10(16) W cm(-2), parent ion dominance decreases and the appearance of multiply charged atomic species occurs, particularly carbon. This phenomenon has been attributed to Coulomb explosions in which the fast absorption of many photons may produce transient highly ionised parent species which can subsequently blow apart. Copyright 1999 John Wiley & Sons, Ltd.