铁镍钴矩磁合金的铁心损耗

本文研究了经过纵向磁退火的铁镍钴合金带的铁心损耗,发现P/f-f曲线具有明显的反常行为。用180°畴壁移的反常涡流损耗理论模型做了解释。并提出一些减小损耗的可能途径。     

High repetition rate mid-infrared generation with singly resonant optical parametric oscillator using multi-grating periodically poled MgO:LiNbO3

A high repetition rate mid-infrared singly resonant optical parametric oscillator (OPO) using MgO-doped multi-grating periodically poled LiNbO₃ (MgO:PPLN) is demonstrated. A 1064 nm Q-switched Nd:YVO₄ laser at 10 kHz repetition rate and pulse width of 17.8 ns was used to pump the OPO. The period of the quasi-phase matched (QPM) grating in the multi-grating MgO:PPLN chip varied from 25.5 to 31.5 μm in steps of 0.5 μm. This corresponds to the generation of a signal beam from 1.37 to 1.64 μm and an idler beam from 3.0 to 4.8 μm, respectively. A maximum signal power of 250 mW and idler power of 140 mW has been obtained with an input pump beam of power 1.92 W, for a grating period of 30.5 μm. A maximum optic-optic conversion efficiency of 20% and 7.4% in the idler has been observed. It has been observed that the output power increases as the period of the grating increases.     

交直流叠加磁化下恒导磁薄片的反常涡流损耗

本文利用一致畴转模型分析了在交直流叠加磁化下恒导磁薄片的低频涡流损耗。指出涡流损耗的反常不仅壁移,而且同样存在于畴转。其原因是畴转过程中畴内磁导率是张量,从而比经典模型增加了一项“侧向涡流”。导出了转动涡流损耗反常系数η_r的表达式;并将结果在某些应用领域中作了推广,得出了相应的结论。     

高合金钢光谱分析准确度改进试验

在我国钢铁厂中,高合金钢的光谱分析受到准确度的限制,没有普遍展开。通过对两种有代表性的高合金钢,即P18高速钢及Я1不锈钢的试验,证明用摄谱方法采取种种改进以后,高合金钢的分析约可达到最小的百分均方误差1％左右。文中对某些工厂的先进经验曾加以介绍。对于高合金钢的准确度问题曾予讨论。