Fluorimetric Determination of Histamine in Fish Using Micellar Media and Fluorescamine as Labelling Reagent

An analytical method based on the use of fluorescamine to produce a fluorescent derivative with histamine and combined with micellar-enhanced fluorescence detection of the formed complex is developed for the sensitive and rapid determination of histamine in fishes. The fluorescence properties of the obtained complex in water and micellar solutions of sodium dodecyl sulfate (SDS), cetyltrimethylammonium chloride (CTAC) and brij-700 are reported. Physicochemical variables influencing the sensitivity of the method (pH, micellar, fluorescamine and NaCl relative concentrations) have been optimized. The stability of the formed complex, as shown by kinetic study, depends on the pH of the solution. Linear calibration curves allowing an effective histamine determination were established with large linear dynamic range (LDR), and low limits of detection (LOD) between 0.5 and 33 ng mL⁻¹, according to the solvent. Application to the analysis of fish samples (sardines) yielded satisfactory results. The method seems to be suitable for environmental fish quality control. Presented in part, at the 39th IUPAC Congress and the 86th Conference of the Canadian Society for Chemistry, August, 10–15, 2003, Ottawa (Canada).     

Microstructural characterisation of nanoparticles using, XRD line profiles analysis, FE-SEM and FT-IR

In this investigation, the structural characteristics of α- Fe₂O₃ nanoparticles synthesised by a mechanical milling have been explored. The structure and morphology of samples were characterized by X-ray powder diffraction, field-emission scanning electron microscope (FE-SEM) and FT-IR measurements. The crystallite size and internal strain were evaluated by XRD patterns using Williamson-Hall and Scherrer methods. The results did not reveal any phase change during the milling. The average particle size decreases with a prolongation of milling times, while the lattice parameters and internal strain increase. It was found that using this method allowed the formation of hematite nanoparticles.     

Sol–gel synthesis of 8 nm magnetite (Fe3O4) nanoparticles and their magnetic properties

Magnetite (Fe₃O₄) nanoparticles were successfully synthesized by a sol–gel method. The obtained nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive analysis by X-ray (EDAX), transmission electron microscopy (TEM), superconducting quantum interference device (SQUID) and Mössbauer spectrometry. XRD and Mössbauer measurements indicate that the obtained nanoparticles are single phase. TEM analysis shows the presence of spherical nanoparticles with homogeneous size distribution of about 8 nm. Room temperature ferromagnetics behavior was confirmed by SQUID measurements. The mechanism of nanoparticles formation and the comparison with recent results are discussed. Finally, the synthesized nanoparticles present a potential candidate for hyperthermia application given their saturation magnetization.     

Free convection effects and radiative heat transfer in MHD Stokes problem for the flow of dusty conducting fluid through porous medium

The present note deals with the effects of radiative heat transfer and free convection in MHD for a flow of an electrically conducting, incompressible, dusty viscous fluid past an impulsively started vertical non-conducting plate, under the influence of transversely applied magnetic field. The heat due to viscous dissipation and induced magnetic field is assumed to be negligible. The governing linear partial differential equations are solved by finite difference technique. The effects of various parameters (like radiation parameter N, Prandtl number Pr, porosity parameter K) entering into the MHD Stokes problem for flow of dusty conducting fluid have been examined on the temperature field and velocity profile for both the dusty fluid and dust particles.     

A RECONSIDERATION OF THE PROPERTIES OF A PULSED RUBY LASER IN RELATION TO MICROSURGERY

Abstract— The properties of a pulsed ruby laser beam focused through a triocular microscope were studied in relation to microsurgery. Quantitative studies on 'model tissues' with different absorbencies at 6943 Å revealed that the spot diameter of the focused microbeam was dependent upon several factors. It decreased with (1) a decrease in the absorption by the object at 6943 Å; (2) a decrease in the energy of the microbeam; and (3) an increase in the magnification of the microscope. The existence of the 'tube of effect' in the optical path of the focused micro-beam was realized by irradiating the object at different planes. The depth of the tube of effect increased with (1) increase in laser energy or (2) decrease in magnification. By employing certain plant species ( Spirogyra praetensis Transeau, Ulva lactuca Linnaeus, Porphyra miniata (Lyngbye) C. Agardh and Elodea sp.) the reaction of the protoplasm to the laser microbeam in terms of 'primary damage' and 'secondary damage' was defined. Based on these experimental data the concept of minimal visible spot size in laser microsurgery and its limitations are discussed.     

Approximation properties of Szász‐Mirakyan‐Kantorovich type operators

In this paper, we introduce and study new type Szász‐Mirakyan‐Kantorovich operators using a technique different from classical one. This allow to analyze the mentioned operators in terms of exponential test functions instead of the usual polynomial type functions. As a first result, we prove Korovkin type approximation theorems through exponential weighted convergence. The rate of convergence of the operators is obtained for exponential weights.     

Synthesis, structural, magnetic and optical properties of nanocrystalline ZnFe2O4

Nanocrystalline zinc ferrite (ZnFe₂O₄) is synthesized by high-energy ball-milling after 12 h from a powders mixture of zinc oxide (ZnO) and hematite (α-Fe₂O₃) with balls to powders mass ratio of 20:1. X-ray diffraction, vibrating sample magnetometer (VSM), the Mössbauer spectrometry and photoluminescence (PL) are used to characterize the samples. Rietveld analysis and VSM measurements show that the powder has an average crystallites size of 10 nm and a ferrimagnetic behavior with a saturation magnetization of 30 emu/g. After annealing at 700 °C, the lattice parameter reduces from 8.448 to 8.427 Å and the sample transforms into a superparamagnetic behavior, which was confirmed as well by the room temperature Mössbauer spectrometry. Different mechanisms to explain the obtained results and the correlation between magnetism and structure are discussed. Finally, the broadband visible emission band is observed in the entire PL spectrum and the estimated energy band gap is about 2.13 eV.     

Size effect on magnetism of Fe thin films in Fe/Ir superlattices

In ferromagnetic thin films, the Curie temperature variation with the thickness is always considered as continuous when the thickness is varied from n to n+1 atomic planes. We show that it is not the case for Fe in Fe/Ir superlattices. For an integer number of atomic planes, a unique magnetic transition is observed by susceptibility measurements, whereas two magnetic transitions are observed for fractional numbers of planes. This behavior is attributed to successive transitions of areas with n and n+1 atomic planes, for which the T(c)'s are not the same. Indeed, the magnetic correlation length is presumably shorter than the average size of the terraces. Monte Carlo simulations are performed to support this explanation.     

Heat transfer in MHD flow of dusty viscoelastic (Walters’ liquid model-B) stratified fluid in porous medium under variable viscosity

The paper investigates the effects of heat transfer in MHD flow of viscoelastic stratified fluid in porous medium on a parallel plate channel inclined at an angle θ. A laminar convection flow for incompressible conducting fluid is considered. It is assumed that the plates are kept at different temperatures which decay with time. The partial differential equations governing the flow are solved by perturbation technique. Expressions for the velocity of fluid and particle phases, temperature field, Nusselt number, skin friction and flow flux are obtained within the channel. The effects of various parameters like stratification factor, magnetic field parameter, Prandtl number on temperature field, heat transfer, skin friction, flow flux, velocity for both the fluid and particle phases are displayed through graphs and discussed numerically.     

Effect of Zr,Ti substitutions onT c in superconducting YBa2Cu3O7−δ system

Zr and Ti have been substituted in the system Y_1−x M _x Ba₂Cu₃O_7−δ(M=Zr, Ti,x=0.05,0.1). We find that theT _c value is unchanged, ∼90K for Zr substitutions up to 10% and in the case of Ti substitutions theT _c drops significantly. These changes may arise from their site preference.