Stereological simulations of asymmetric polymerization in channels of bile acid inclusion compounds: A detailed analysis of the monomer arrangements in the channels

We studied simulations by computer graphics to estimate the steric mechanism of the asymmetric polymerization of prochiral diene monomers in channels of inclusion compounds of steroidal bile acids, such as deoxycholic acid (DCA) and cholic acid. We applied a hierarchization method to interpret the crystal structures of bile acids, clarifying that the chiral host molecules associated to form characteristic 2₁-helical assemblies with uneven surfaces. A detailed analysis of the uneven channels in a close-packing state indicated that there were many possible arrangements of the monomers in the channels. The plausible arrangements in the channel could explain a previous study, which showed that the polymerization in the DCA channel yielded chiral polymers with a predominant configuration from prochiral diene monomers, such as 2-methyl-trans-1,3-pentadiene. On the basis of such simulation studies of the arrangements of guest monomers in the channel, we examined a plausible steric mechanism for asymmetric inclusion polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4648–4655, 2004     

Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Effect of structural variation within cationic azo-surfactant upon photoresponsive function in aqueous solution

The cationic azo-surfactants possessing different spacers and tail alkyl chain lengths have been synthesized by azocoupling ofp-alkylaniline orop-ethoxyaniline with phenol, followed by alkylation and quaternalization with dibromoalkane and trimethylamine, respectively. These surfactants showed a good solubility in water. A reversibletrans-cis isomerization of the azosurfactants by photoirradiation was assessed by UV-Vis absorption spectra. Due to a difference in HLB between thetrans- andcis-surfactants, the observed critical micelle concentration (CMC) values and the electric conductivity of the surfactant solution at above the CMC were significantly affected by the photoinducedtrans-cis isomerization. The azo-surfactants bearing moderate alkyl chain lengths such as surfactants 6 (R₂=C₂H₄, R₃=C₄H₉) and 9 (R₂=C₄H₈, R₃=C₂H₅) were found to be effective to achieve large CMC changes (3.6 mmol/L for 6 and 5.9 mmol/L for 9) by UV-light irradiation. The replacement of the tail chain species also affected the photoresponsive function. The surfactant 12, possessingp-ethoxy group as the tail chain, was found to form a stable micelle aggregation as compared with the structurally related surfactant 10 having ethyl unit as its tail group, but it exhibited a large CMC change (5.3 mmol/L) by UV-light irradiation.     

Characteristics of hyaluronate-hydroxyethyl acrylate blend gel and release of cationic amphiphilic solutes

Hyaluronate-hydroxyethyl acrylate blend gel (HA-PHEA) were prepared to modify the brittleness of hyaluronate gel (HA) and the characteristics of HA-PHEA gel were compared with those of HA and polyhydroxyethyl acrylate (PHEA) gels. These gels were high in water content and transparent. HA-PHEA gel was improved in viscoelastic properties due to the elasticity and the high affinity with water of PHEA, and the drying-swelling cycles became reversible. The effective charge densities theta of the gels estimated from membrane potentials were -0.002, -0.008 and 0 mol dm(-3) for HA-PHEA, HA and PHEA gels. Effects of electro- static and nonelectrostatic interactions on absorptions and releases were studied using sodium benzoate (NaBA) as an anionic solute, and methylene blue (MB), chlorpromazine (CPHCl) and benzethonium chloride (BZTCl) as cationic solutes, in which CPHCl and BZTCl are cationic amphiphilic solutes. The releases of MB, CPHCl and BZTCl from HA-PHEA and HA gels were suppressed comparing with those of NaBA. By adding salts, the releases of MB and CPHCl were enhanced but those of BZTCl were suppressed due to enhancement of the intra- and intermicelle formation. In the releases of the cationic solutes from HA-PHEA gel, electrostatic and nonelectrostatic interactions with HA were found to play important roles. Behaviors of the releases from HA-PHEA gel were found to possess the features of HA gel.     

Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Reaction of 1-alkylthioisoquinolinium salts with active methylene compounds

2-Alkyl-1-alkylthioisoquinolinium salts were readily prepared from 2-alkyl-1(2H)-isoquinolones via 2-alkyl1(2H)-thioisoquinolones in two steps. Under mild conditions, the reaction of 2-alkyl-1-alkylthioisoquinolinium salts with active methylene compounds in the presence of sodium hydride afforded 2-alkyl-1-(substituted methylene)iso-quinolines in good yields. Pyrrolo[2,1-a]isoquinolines were synthesized by the cyclization of 2-benzyl-1-(substituted methylene)isoquinolines using acetic anhydride.     

Structure reinvestigation of gelsemoxonine,a constituent of Gelsemium elegans,reveals a novel,azetidine-containing indole alkaloid

[structure: see text] The structure of gelsemoxonine, isolated from Gelsemium elegans Benth., was revised to be a novel oxindole alkaloid having an azetidine unit. A new alkaloid, 14,15-dihydroxygelsenicine, which was presumed to be a biosynthetic precursor of gelsemoxonine, was also isolated.     

Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.     

Determination of 4-hydroxy-2-nonenal in primary rat hepatocyte cultures by liquid chromatography with laser induced fluorescence detection

An HPLC (high performance liquid chromatography) method with laser induced fluorescence (LIF) detection is described for the determination of 4-hydroxy-2-nonenal (HNE) formed from lipid peroxidation in rat hepatocytes. Carbonyl compounds were fluorescently labelled by incubating the hepatocyte samples with a tagging reagent, 4-(2-carbazoylpyrrolidin-1-yl)-7-nitro-2,1,3-benzoxadiazole (NBD-ProCZ), at 60 degrees C for 10 min. The hydrazone derivatives were extracted with a C18 solid phase extraction (SPE) cartridge and separated on a reversed-phase HPLC column. The detection limit was 2.5 fmol or 0.5 nM (5 microL injection) of HNE in the cell homogenate. Method precision (C.V.) was 5% at the 5 nM level. The method has been used to determine free HNE in rat hepatocyte samples treated with several pro-oxidant toxins. A significant HNE increase (from 4 to 27.6 pmol/10(6) cells) was observed with the samples treated by allyl alcohol. The results were in accordance with those for malondialdehyde formation as measured by a thiobarbituric acid (TBA) assay.