Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Synthetic studies on (−)-FR182877: construction of the ABCD ring system via the intramolecular cycloadditions (2)

Construction of the ABCD ring system of (−)-FR182877 via the intramolecular Diels-Alder (IMDA) reaction and the highly diastereoselective intramolecular hetero-Diels-Alder (IMHDA) reaction is described. The IMHDA reactions of the substrates incorporating the oxabutadiene with the E- or Z-alkene were examined, revealing that the sole product was obtained from both substrates and the E-alkene geometry was found to be crucial to obtaining the desired product.     

Synthesis,Properties, and Redox Behavior of 1,1,4,4‐Tetracyano‐2‐ferrocenyl‐1,3‐butadienes Connected by Aryl,Biaryl, and Teraryl Spacers

Aryl‐substituted 1,1,4,4‐tetracyano‐1,3‐butadienes (FcTCBDs) and bis(1,1,4,4‐tetracyanobutadiene)s (bis‐FcTCBDs), possessing a ferrocenyl group on each terminal, were prepared by the reaction of a variety of alkynes with tetracyanoethylene (TCNE) in a [2+2] cycloaddition reaction, followed by retro‐electrocyclization of the initially formed [2+2] cycloadducts (i.e., cyclobutene derivatives). The characteristic intramolecular charge transfer (ICT) between the donor (ferrocene) and acceptor (TCBD) moieties were investigated by using UV/Vis spectroscopy. The redox behaviors of FcTCBDs and bis‐FcTCBDs were examined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), which revealed their properties of multi‐electron transfer depending on the number of ferrocene and TCBD moieties. Moreover, significant color changes were observed by visible spectroscopy under the electrochemical reduction conditions.     

A novel condition for capillary electrophoretic analysis of reductively aminated saccharides without removal of excess reagents

We have identified novel CE conditions for the separation of 7‐amino‐4‐methylcoumarin‐labeled monosaccharides and oligosaccharides from glycoproteins. Using a neutrally coated capillary and alkaline borate buffer containing hydroxypropylcellulose and ACN, saccharide derivatives form anionic borate complexes, which move from the cathode to the anode in an electric field and are detected near the anodic end. Excess labeling reagents and other fluorescent products remain at the cathodic end. Fluorimetric detection using an LED as a light source enables determination of monosaccharide derivatives with good linearity between at least 0.4 and 400 μM, may correspond to 140 amol to 140 fmol. The lower LOD (S/N = 5) is only 80 nM in the sample solution (ca. 28 amol). The results were comparable to reported values using fluorometric detection LC. The method was also applied to the analysis of oligosaccharides that were enzymatically released from glycoproteins. Fine resolution enables profiling of glycans in glycoproteins. The applicability of the method was examined by applying it to other derivatives labeled with nonacidic tags such as ethyl p‐aminobenzoate‐ and 2‐aminoacridone‐labeled saccharides.     

Chiral phosphinooxazolidine ligands for palladium- and platinum-catalyzed asymmetric Diels-Alder reactions

Cationic palladium (Pd)- and platinum (Pt)-phosphinooxazolidine catalysts 13a-c, 15a-d, 17a-c, and 19a-c were prepared from phosphinooxazolidine ligands 1-3, MCl(2) (M = Pd and Pt), and counterions, and the activities of the catalysts in the asymmetric Diels-Alder (DA) reactions of cyclic or acyclic dienes with imide dienophiles were investigated. These catalysts demonstrated high levels of catalytic activity. The cationic Pd-POZ complex 13c provided particularly excellent enantioselectivity (98% ee) in the DA reactions of cyclopentadiene with acryloyl-, crotonyl-, and fumaroyl-1,3-oxazolidin-2-ones (20a-c).     

Synthesis of 2-azabicyclo[2.1.0]pentanes by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide

A variety of 2-azabicyclo[2.1.0]pentanes were synthesized by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide. The 1-chlorocyclopropyl p-tolyl sulfoxides possessing an N-aryl-substituted aminomethyl group were prepared from dichloromethyl p-tolyl sulfoxide, α,β-unsaturated carboxylic acid esters, and anilines in four steps. The deprotonation of the amine with t-BuMgCl followed by sulfoxide/magnesium exchange of the sulfoxides with i-PrMgCl led to the generation of the cyclopropylmagnesium carbenoids possessing a magnesium anilide moiety. Subsequent intramolecular nucleophilic substitution of the cyclopropylmagnesium carbenoids occurred in a 4-exo-tet manner to give the 2-azabicyclo[2.1.0]pentanes. The optically active 2-azabicyclo[2.1.0]pentane was synthesized using a p-tolylsulfinyl group as a chiral auxiliary.     

Catalytic Enantioselective Reaction of α‐Phenylthioacetonitriles with Imines Using Chiral Bis(imidazoline)–Palladium Catalysts

The catalytic enantioselective reaction of α‐phenylthioacetonitriles with imines has been developed. The reaction of various imines proceeds in good yields and diastereo‐ and enantioselectivities in the presence of chiral bis(imidazoline)–palladium catalysts. The obtained products can be converted into β‐aminonitrile or β‐aminoamide compounds without loss of enantiopurity.     

Potential energy curve for ring-opening reactions: comparison between broken-symmetry and multireference coupled cluster methods

The spin-unrestricted Hartree-Fock (UHF)-based coupled cluster singles and doubles (UHF-CCSD) and Mukherjee's state-specific multireference CCSD (MkCCSD) methods are applied to four ring-opening reactions. The spin-restricted Hartree-Fock (RHF)-based CCSD (RHF-CCSD) calculations are also performed for comparison. In the case of the UHF-CCSD method, an approximate spin-projection (AP) method is applied to the broken-symmetry (BS) singlet solution to remove the spin contamination effect. For potential energy curves (PECs) of all reactions presented in this study, the results of RHF-CCSD and UHF-CCSD are substantially different from those of MkCCSD, while the results after the AP method (AP-UCCSD) reproduce the MkCCSD results well. It strongly suggests that the spin contamination effect should be removed by the AP correction even at the UHF-CCSD level to predict reliable energetics of these reactions.