Epoxy-silica/clay nanocomposite for silver-based antibacterial thin coatings: structure and ionic mobility

Journal of Solid State Electrochemistry - A novel material was developed using sol-gel chemistry and an environmental-friendly grafting process of clay nanoparticles. In a previous work of our...     

Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Radiation pasteurised oil palm empty fruit bunch fermented with Pleurotus sajor-caju as feed supplement to ruminants

In solid state fermentation, Pleurotus sajor-caju has been found to be able to degrade at least 30% oil palm empty Fruit Bunch (EFB) fibre leaving 70 % useful materials. Conditions under which fermentation carried out were investigated. It was found that, in the temperature range between 25– 28 °C, relative ph between 6–8, moisture between 60–70 % and medium composition of CaCO₃: rice bran 2 %: 5 % were the optimum conditions. The results showed in fermented products that, there were substantial reduction in cellulosic component such as Crude Fiber (CF, 18 %); Acid Detergent Fibre (ADF, 45 %), Neutral Detergent Fibre (NDF, 61 %) and Acid Detergent Lignin (ADL, 14 %). However, Crude Protein (CP, 10%) increased resulted from single cell protein enrichment of mycelial microbial mass. The mass reductions of substrate in fermentation process corresponds to the CO₂ released during fermentation. Hence, attributable to the decreased in content of CF, ADF, NDF, and ADL. The digestibility study has also been carried out to determine the useful level of this product to ruminant. Aflatoxin content was detected low in both the initial substrates and products. Based on nutritional value and low content of aflatoxin, the product is useful as a source of roughage to ruminant.     

Two-dimensional gas motion in nuclear-pumped laser cells at low energy deposits into the gas

The distribution of the two-dimensional gas velocity inside ion-irradiated laser cells is considered for low ion energy deposits into the gas. It is shown that, if the energy deposit is smoothly nonuniform, the twodimensional motion has two quasi-one-dimensional components: the longitudinal gas velocity is practically uniform across the cell and depends on the transversely averaged energy deposit, while the transverse velocity component depends on the difference between the local energy deposit and energy deposit averaged over the transverse direction.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Design and application of double amplified recirculating ring structure for hybrid fibre buses

The design of a double-parallel amplified recirculating optical delay line utilizing an erbium-doped fibre amplifier for a fibre optical bus is described. This structure is used for amplifying, equalizing and filtering multicarrier signals coming from optoelectronic units attached to fibre couplers. The use of this structure for a hybrid multimode-singlemode fibre bus that includes optoelectronic units for sensors is also demonstrated.     

反应原料组成对单分散苯乙烯微球粒径及其分布的影响

采用分散聚合工艺制备微米级单分散聚苯乙烯微球，并对分散聚合反应的内部影响因素(分散稳定剂、助稳定剂、单体、引发剂)进行了研究．结果表明，随着分散稳定剂和助稳定剂用量的增加，聚苯乙烯微球的粒径减小；随着单体和引发剂用量的增加，聚苯乙烯微球的粒径增大．分散稳定剂和单体用量是影响聚苯乙烯微球粒径分布的两个主要内部因素．     

Synthesis of octahydroquinolines through the Lewis acid catalyzed reaction of vinyl allenes and imines

The reaction of vinyl allenes with imines under Lewis acid catalysis has been explored. Vinyl allenes in which the allenic portion of the molecule is tri- or tetrasubstituted gave octahydroquinoline derivatives as single isomers together with a minor compound formed by an ene reaction of the imine with the allene. Compounds in which the allene is 1,3-disubstituted do not react under the conditions assayed.     

Organopolysiloxanes as Chemically Sensitive Coatings for Optical Fibers

Various types of UV-curable organically modified siloxanes have been synthesized by the sol-gel method with the aim of fabricating chemically sensitive coatings for silica optical fibers. The refractive index of the coating material can be tailored in the range from 1.46 to 1.56 and sensitivity towards CO2 is achieved by incorporation of amino groups. The interaction of the cured layers with CO2 or with hydrocarbons has been studied in immersion experiments. Both the reaction of CO2 with incorporated amino groups and the penetration of hydrocarbons into the layer induce changes of the light absorption coefficient and the refractive index of the coating which are detected by measuring the output light intensity from the fiber.