A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.     

Laminar heat transfer and fluid flow of two various hybrid nanofluids in a helical double-pipe heat exchanger equipped with an innovative curved conical turbulator

Journal of Thermal Analysis and Calorimetry - In the present study, the effect of inserting an innovative curved turbulator and utilizing two types of hybrid nanofluids on thermal performance in a...     

On the free vibration response of rectangular plates,partially supported on elastic foundation

Rectangular plates on distributed elastic foundations are widely employed in footings and raft foundations of variety of structures. In particular, mounted columns and single footings may partially occupy the rectangular plate of any kind.     

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 μm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.     

Calixarene Dimers as Host Molecules for Biologically Important Di‐ and Oligophosphates

A dimeric calixarene, with an aliphatic C₆‐bridge and six anilinium head groups at its upper rim, preferably complexes diphosphates and oligonucleotides with more than 10 bonds between both anionic moieties. Free binding energies correlate with the length of the aliphatic bridge in a roughly linear fashion. The binding event, which is monitored by fluorescence titrations and competition experiments, relies on Coulomb interactions, as opposed to a nonpolar variant with tert‐butyl instead of ammonium groups; here, hydrophobic forces prevail, rendering the calixarene dimer selective for less polar cofactors such as FAD. The best guest for the hexaanilinium dimer is found in ssDNA, which carries multiple copies of the optimal trinucleotide for maximum attraction towards the extended cationic host. The recognition event is also observed in the environment of a lipid monolayer, and provides a means to quantify dimer diphosphate interactions by measuring p/A shifts.     

Analytical solutions to nonlinear equations arising in heat transfer by variational iteration,homotopy perturbation,and Adomian decomposition methods

As thermal conductivity plays an important role on fin efficiency, we tried to solve heat transfer equation with thermal conductivity as a function of temperature. In this research, some new analytical methods called homotopy perturbation method, variational iteration method, and Adomian decomposition method are introduced to be applied to solve the nonlinear heat transfer equations, and also the comparison of the applied methods (together) is shown graphically. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 2010     

The oak (Quercus brantii) acorn as a growth promotor for rainbow trout (Oncorhynchus mykiss): growth performance,body composition,liver enzymes activity and blood biochemical parameters

Abstract

Medicinal plants play an important role in aquaculture as feed additives. This study aimed to investigate effects of alcoholic extract of acorn on growth performance, body composition, digestive enzymes activity and blood biochemical parameters of rainbow trout (O. mykiss) as a commercially important fish. Five dietary treatments were supplemented: 100, 200, 400 and 600?mg.kg^?1 of the extract. Fishes were fed twice per day for 8?weeks, and results showed that acorn extract positively affected all investigated parameters in rainbow trout fishes. Digestive enzymes activity and growth performance were increased, while activity of liver enzymes and cortisol were lowed in comparison to control individuals. Body composition of treated animals was also enhanced. Comparison between treated groups together with integrative biomarker response (IBR) values indicated greatest effects in animals fed with 400 and 600?mg.kg^?1 of the extract. Positive effects of the acorn represent promising start point for further studies.     

Directed DNA metallization

Genes of interest can be selectively metallized via the incorporation of modified triphosphates. These triphosphates bear functions that can be further derivatized with aldehyde groups via the use of click chemistry. Treatment of the aldehyde-labeled gene mixture with the Tollens reagent, followed by a development process, results in the selective metallization of the gene of interest in the presence of natural DNA strands.