Headspace SPME–GC Method for Acetone Analysis and its Biomedical Application

A new method for extraction and analysis of acetone in human urine based on headspace solid phase microextraction using a mixture of activated carbon and zeolite as sorbents in a PVC matrix coated on a silver wire and its application to the determination of ketone bodies is described. Unlike commercial fibers, which are coated on fused silica, the coating adheres strongly to the silver wire and is thermally stable up to 250 °C. After optimization of coating composition and microextraction conditions the fiber was used for the analysis of acetone in human urine.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.     

Semi-micro solvent extraction as a rapid and efficient preconcentration technique for the determination of n-alkanes in oil-contaiminated water and soil samples by capillary gas chromatography

Summary In this study, a rapid and efficient semi-micro extraction procedure is presented for the extraction of some higher n-alkanes from water and soil samples. In the case of water samples n-hexane was used as the organic phase in a phase volume ratio (volume of aqueous phase/volume of organic phase) higher than 285, while in the case of soil samples, extraction with n-hexane was carried out in the presence of an excess of 2 M NaCl solution. The extraction rate from soil samples is very high and is better than Soxhlet extraction, comparable with supercritical fluid extraction. High preconcentration factor in water samples allows the limits of detection to be in the ng.mL⁻¹ level with the use of gas chromatographic analysis. Flame ionization detector was used for monitoring the analytes. The obtained recoveries of all studied compounds from both water and soil samples are higher than 90%. This method was successfully used to determine some n-alkanes in municipal wastewater and contaminated soil.     

HPLC and GC Methods for Determination of Lubricants and Their Evaluation in Analysis of Real Samples of Polyethylene

High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants (stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol (60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method. Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants in commercial polymers (0.05–0.2%).     

Hydration of short-chain poly(oxyethylene) in carbon tetrachloride: an infrared spectroscopic study

Hydration of short-chain poly(oxyethylene)s, CH(3)(OCH(2)CH(2))(m)OCH(3) (abbreviated as C(1)E(m)()C(1)) (m = 1-3), in carbon tetrachloride has been studied by infrared spectroscopy. The O-H stretching vibrations of water in ternary solutions with H(2)O:C(1)E(m)C(1):CCl(4) mole ratios of 0.000418:0.005:0.995 to 0.000403:0.04:0.96 were analyzed. Two types of hydrogen bonds are formed in the interaction between water and C(1)E(m)C(1) in carbon tetrachloride; one is a monodentate hydrogen bond, in which only one of the O-H bonds of a water molecule participates in hydrogen bonding, and the other is a bidentate hydrogen bond, in which both of the O-H bonds of a water molecule participate in hydrogen bonding by bridging oxygen atoms separated by two or more monomer units on the polymer chain. An important finding is that the bidentate hydrogen-bond bridge is not formed between the nearest-neighbor oxygen atoms. This experimental observation supports the results of previous molecular dynamics simulations. The shortest oligomer of poly(oxyethylene), i.e., CH(3)OCH(2)CH(2)OCH(3) (1,2-dimethoxyethane) with a single monomer unit, is suggested not to be an adequate model for this polymer with respect to hydrogen bonding to water. The hydrogen bonding in a 1:1 C(1)E(m)C(1)-water adduct in carbon tetrachloride represents primitive incipient hydration of poly(oxyethylene). The present results indicate that both monodentate and bidentate hydrogen bonds are important and the latter is destabilized more rapidly than the former with increasing temperature. This dehydration process can be a potential mechanism of the poly(oxyethylene)-water phase separation.     

Ketoconazol‐Triiodide Ion Pair Complex as a Suitable Carrier in an Iodide Selective Membrane Electrode

A novel membrane sensor for selective monitoring of iodide, consisting of a triiodide‐ketoconazole ion pair complex dispersed in a PVC matrix, plasticized with a mixture of 2‐nitrophenyl octyl ether and dioctylphtalate with unique selectivity toward iodide ions, is described. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The optimized membrane demonstrates a near‐Nernstian response for iodide ions over a wide linear range from 1.0 × 10^?2 to 1.0 × 10^?5 M, at 25 ± 1 °C. The electrode could be used over a wide pH range 3–10 and has the advantages of high selectivity, fast response time and good lifetime (over 4 months). It was successfully used as indicator electrode in potentiometric titrations and direct potentiometric assay of iodide ions.     

Different PES nanofibrous membrane parameters effect on the efficacy of immunoassay performance

The contribution of electrospun nanofibrous membranes (e.NFMs) in the biosensing platforms opens up a new prospect for the invention of faster and more sensitive analytical devices. In this paper, we utilized e.NFM of polyethersulfone (PES) as a solid substrate for the protein immobilization through two different approaches: physical and covalent. Scanning electron microscopy (SEM) and Fourier‐transform‐infrared (FTIR) tests were performed to study the effect of plasma treatment on protein immobilization efficacy. Moreover, taking advantage of ELISA technique, the influence of different parameters, namely, nanofibers diameter, membrane thickness, plasma treatment time, an incubation time of ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide/N‐hydroxysuccinimide (EDC/NHS), and their ratio on antibody immobilization efficacy through two mentioned approaches, was also assessed.     

Graphene oxide reinforced polyamide nanocomposite coated on paper as a novel layered sorbent for microextraction by packed sorbent

ABSTRACT

In this work, a novel layered sorbent for microextraction by packed sorbent (MEPS) was introduced, which has been prepared by coating graphene oxide/polyamide (GO/PA) nanocomposite (NC) onto cellulose paper through solvent exchange method. Scanning electron microscopy (SEM) was applied to investigate the surface characteristic and morphology of PA and GO/PA NC coated on cellulose paper. The prepared MEPS device was used for extraction of organophosphorous pesticides (OPPs) including chlorpyrifos, fenthion, fenithrothion, ethion, edifenphos and phosalone in environmental aqueous samples followed by detection using gas chromatography-flame ionisation detector (GC-FID). Important parameters affecting the MEPS method including pH of sample solution, extraction draw-discard cycles, sorbent layers, desorption solvent volume and desorption draw-eject number were studied and optimised using central composite design (CCD). Based on the method validation, limits of detection (LODs) were in the range of 0.2–1 µg L^?1. The calibration graphs for chlorpyrifos, fenthion and edifenphos are linear in the concentration range of 1 to 500 µg L^?1; for ethion and phosalone are linear in the range of 1–1000 µg L^?1 and for fenithrothion is linear in the range of 3–1000 µg L^?1. The method precision (RSD %) with six replicates determinations was in the range of 3 to 9.4 % and 3.9 to 11.9% for distilled water and spiked river water sample, respectively, at the concentration level of 300 µg L^?1 . The developed method was applied successfully to determine OPP compounds in river, dam and tap water samples; accordingly, the relative recoveries (RR%) were obtained in the range of 77.8 to 113.3%.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

Detection of copper(II) sulfate’s uniformity and its thermal behavior in flammability of cotton fabric

Blue vitriol (copper(II) sulfate pentahydrate), CuSO₄·5H₂O has been chosen and investigated for its effectiveness as a flame-retardant, when impregnated into cotton fabric (cotton with a plain structure; woven 180 g m⁻², with 22 numbers of yarns per 10 mm). Using the vertical flame test, the extent of resistance to burning of the specimens has been determined. The impregnation was accomplished via dipping and stirring of bone-dried, weighed fabrics into the individual and suitable concentrations of the salt at room temperature. Afterwards the samples were squeeze rolled and dried horizontally at 110°C for 30 min in an oven and cooled in a desiccator and reweighed with an analytical precision. They were then kept under ordinary conditions overnight prior the fulfillment of the vertical flame test. The efficient quantities of the aforesaid salt expressed in g per 100 g dry fabric have been determined in an average figure of 12.75%. Estimation of uniformity in a selected sample was carried out via a spectrophotometer and results are in favor of the heterogeneous distribution of the salt in the fabric’s middle sectors. However initial and final parts of specimen showed to be rather uniformed. Thermogravimetric analysis of the pure cotton and the treated ones with insufficient and effective amounts of the salt were fulfilled and their thermograms were compared and commented. The results obtained for the effect of copper(II) sulfate comply with ‘The Dust or Wall Effect Theory’. This action is also assigned to the condensed phase retardation.