Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Simulation of a High Harmonic Gyrotron with Axis-Encircling Electron Beam and Permanent Magnet

A computer code for simulation of beam-field interaction in a resonant cavity of a gyrotron has been developed. It is based on a self-consistent, time-independent, single-mode physical model. The code has been applied to the analysis of the electrodynamical system of a novel high-harmonic gyrotron with axis-encircling beam and a permanent magnet. In this paper both the physical model and numerical techniques used are outlined. Some results of the numerical experiments are presented and discussed.     

Study on crystalline properties of Er-Si-O compounds in relation to Er-related 1.54 μm photoluminescence and electrical properties

Er-Si-O crystalline compounds, which exhibit superlattice structures and sharp and strong Er-related 1.54 μm photoluminescence (PL) spectra at room temperature have been formed by self-assembling growth mechanism. Oxidation of the starting materials which have Si and Er at an atomic ratio of 2:1 are prepared and then oxidation and succeeding high-temperature annealing in Ar above 1250 °C cause a self-assembled superlattice-structured Er-Si-O crystalline compounds. The control of the ratio of Si and Er, as well as the following oxidation and annealing processes, is found to be sensitive to the crystalline properties, PL spectra and electrical properties. In this study, Er-Si-O crystalline thin films are formed on Si substrates by sol-gel and MOMBE methods, and their crystalline properties such as crystalline orientation and concentration ratio of Er, Si and O are investigated. Crystalline Er-Si-O films of high orientation are successfully grown on Si(1 0 0) and its inclined surface. The PL and excitation spectra, fluorescence decay and the electrical properties are found to be strongly related to the crystalline properties. Excess O causes a broader 1.54 μm PL spectra, slower fluorescence decay, lower carrier-mediated excitation and higher resistivity. A precise control of O is found to be necessary to grow superlattice-structured Er-Si-O compounds, which are semiconducting and are excitable via carrier-mediated excitation mechanism.     

Improvement of gas meter performance using polymer materials

The measuring elements of both dry‐ and wet‐type gas meters are composed of a diaphragm and rotary drum. In this article an explanation on the principle of measuring and the structure of the gas meter for each of these two types was discussed. Such applications were made as follows: synthetic rubber was used for the measuring diaphragm, engineering plastic was employed instead of metal for the measuring drum, and poly(butylene terephthalate) (PBT) was used for the casing, respectively. As a result, an improvement in the gas resistance performance and productivity, which led to a lighter weight, more compactness and a lower cost of productions was achieved. Also the influence of the solubility of the measured gas to the plastic on the measured valve was discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Interfacial adsorption state of protonated lipophilic porphyrins in a liquid-liquid system by using reflection spectrometry.

Analysis by reflection spectrometry was performed to clarify the interfacial adsorption of protonated lipophilic tetraphenylporphyrin derivatives in a dodecane-aqueous sulfuric acid system, and to confirm the utility of partial reflection spectroscopy. Interfacial adsorption was not observed for porphyrins substituted at the 2,6 positions of meso-phenyl groups, suggesting that the substituents prevent porphyrins from forming aggregates by steric hindrance. Polymorphous J-aggregates of acid dications were produced by tetra-p-tolylporphyrin with a saturated interfacial molecular density of 1.0 x 10(-10) mol cm(-2), which could yield 48 degrees as a mean tilting angle of the pyrrole ring plane from the interface normal. Partial-reflection spectrometry can provide sensitive detection and molecular orientation analysis of interfacial adsorbates.     

Gamma-ray spectroscopy of the neutron-rich Ni region through heavy-ion deep-inelastic collisions

Nuclei in the neutron-rich Ni region have been studied by γ-ray spectroscopy. Gamma-rays emitted from isomers, with T _1/2 > 1 ns, produced in heavy-ion deep-inelastic collisions were measured with an isomer-scope. The nuclear structure of the doubly magic ⁶⁸Ni and its neighbor ^69,71Cu is discussed on the basis of the shell model. Future experiments for more neutron-rich Ni nuclei are also viewed. Received: 1 May 2001 / Accepted: 4 December 2001     

Application of Novel Focusing Mirrors in Gyrotron Transmission Lines

A novel focusing mirror based on the shifting of the beam phase according to the Gaussian beam optics enabled us to realize a focusing elements with different focal lengths in different directions and to convert the gyrotron output into a Gaussian-like beam. In this paper, we compare the quality of beams produced by the new system (which includes novel mirrors) and a conventional system consisting of a quasi-optical antenna, an ellipsoidal mirror and two parabolic cylinder mirrors.     

Synthesis and structure-activity relationships of N-substituted 2-[(2-imidazolylsulfinyl)methyl]anilines as a new class of gastric H+/K(+)-ATPase inhibitors.

A series of N-substituted 2-[(2-imidazolylsulfinyl)methyl]anilines (3) was synthesized and evaluated for its biological activity against gastric H+/K(+)-ATPase prepared from rabbit stomach and gastric acid secretions in Heidenhain pouch dogs. Monoalkyl substituents on the nitrogen atom of the aniline moiety markedly inhibited the enzyme activity to the same degree as omeprazole, a representative H+/K(+)-ATPase inhibitor. Most of these compounds, administered at 3 mg/kg i.v. inhibited histamine-stimulated gastric acid secretion. The inhibitory activity of these derivatives on the enzymes at pH 6.0 was more potent than that at pH 7.4, and was distinctly correlated to stability in aqueous solution at pH 5.0.