Electrocatalytic activity of sol-gel-prepared RuO2/Ti anode in chlorine and oxygen evolution reactions

Electrocatalytic properties of RuO₂/Ti anode with different coating masses, which are prepared by the alkoxide sol-gel procedure, are investigated in chlorine and oxygen evolution reactions by polarization measurements and electrochemical impedance spectroscopy in H₂SO₄ and NaCl electrolytes. According to polarization measurements, the activity of anodes at overpotentials below 100 mV is independent of coating mass. However, impedance measurements above 100 mV reveal changes in the activity of anodes in chlorine evolution reaction for different coating masses. The diffusion limitations related to the evolved chlorine are registered in low-frequency domain at 1.10 V (SCE), diminishing with the increase in potential to the 1.15 V (SCE). The observed impedance behavior is discussed with respect to the activity model for activated titanium anodes in chlorine evolution reaction involving formation of gas channels within porous coating structure. Gas channels enhance the mass transfer rate similarly to the forced convection, which also increases the activity of anode. This is more pronounced for the anode of greater coating mass due to its more compact surface structure. The more compact structure appears to be beneficial for gas channels formation. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1173–1179. The text was submitted by the authors in English.     

Unusual and unexpected reactivity of t-butyl dicarbonate (Boc2O) with alcohols in the presence of magnesium perchlorate. A new and general route to t-butyl ethers

[reaction: see text] A new mild method for protecting alcohols as t-butyl ethers is reported. The reaction proceeds with Mg(ClO4)2 and Boc2O and shows general applicability. The deprotection of t-butyl ethers has also been revisited. Preliminary results indicate the CeCl3 x 7H2O/NaI system is a very suitable catalyst for their removal.     

The evolution of comprehensive two-dimensional gas chromatography (GC x GC)

For a technology little over a decade old, comprehensive two-dimensional gas chromatography (GC x GC) has quickly reached the status of one of the most powerful analytical tools for volatile organic compounds. At the heart of any GC x GC system is an interface, which physically connects the primary and the secondary columns and acts to preserve the separation obtained in the first dimension (first column) while allowing additional separation in the second dimension. The paper presents a review of the technology, including fundamental principles of the technique, data processing and interpretation and a timeline of inventive contributions to interface design. In addition, applications of the technique are presented, with a more detailed discussion of selected examples.     

Use of high-molecular-mass polyacrylamides as matrices for microchip electrophoresis of DNA fragments

DNA fragment analysis requires the use of polymer solutions as sieving matrices. Generally, such matrices are constituted of high-molar-weight polymers employed at a concentration higher than their entanglement threshold concentration. These polymer solutions are highly viscous and difficult to use in the narrow channels of a microchip. Ultralarge polyacrylamides synthesized via a nonconventional method, being the low-temperature plasma-induced polymerization (PIP), were used as DNA sieving matrices for microchip electrophoresis. The distinctive features of these polymers (ultralarge molecular mass and linearity) allow their use at a dilute concentration. Dilute PIP polyacrylamides revealed a constant value of resolution in a broad range of DNA fragment sizes (123 bp-1353 bp), thus proving to be effective in common genotyping applications. Moreover, the low viscosity of the dilute solutions enable it to be easier and faster in filling the channel between runs, thus enhancing the throughput of the microchip devices.     

The impedance behavior of the cell Au/HClO4 · 5.5 H2O/Au in the temperature range 4.2–300 K

The impedance of the cell Au/HClO₄-5.5 H₂O/Au was investigated in the frequency range 1 to 10⁵ Hz between 4.2 and 300 K. The analysis of the data enables an evaluation of important electrolyte properties such as conductivity and dielectric constant in a wide range of temperatures, predominantly in the solid state of the electrolyte HClO₄-5.5 H₂O (T_f = 228 K). The double layer capacity of the gold electrodes was also determined; it shows a qualitatively similar result compared with previous measurements. In the solid state, the ionic conductivity exhibits two distinct activation energies of 0.37 and 0.54 eV corresponding to the two phases present in HClO₄-5.5 H₂O above and below 170 K. Below 120 K the activation energy becomes very small and tends to zero around 80 K indicating possible tunneling processes in the rigid H₂O structure. At about the same temperature the dielectric constant reaches its low temperature limit with a value _∞ ≈ 11 which is considerably higher than the value of pure ice of _∞ ≈ 3.     

The Michael addition of indoles to alpha,beta-unsaturated ketones catalyzed by CeCl3.7H2O-NaI combination supported on silica gel

Alkylation of indoles by means of the Michael addition has been the subject of a number of investigation. It is well established that regioselectivity in the additions of indoles to electron-deficient alkenes is strongly controlled by the reaction medium. In a continuation of the work on developing greener and cleaner technologies, the cerium(III) chloride heptahydrate and sodium iodide combination supported on silica gel catalyzes the alkylation of various indoles with alpha,beta-unsaturated ketones giving 3-(3-oxoalkyl)indole derivatives in good yields. The substitution on the indole nucleus occurred exclusively at the 3-position, and N-alkylation products have not been observed.     

New heterocyclic structures. [1,3]Thiazino[3,2-a]purine and [1,2,3]triazolo[4,5-d][1,3]thiazino[3,2-a]pyrimidine

Derivatives of two new molecular structures, namely, [1,3]thiazino[3,2-a]purine and [1,2,3]triazolo[4,5-d]-[1,3]thiazino[3,2-a]pyrimidine, were synthesized together with other heterocyclic compounds. Retrosynthetic analysis of their molecular skeletons suggested a simple way of obtaining 3,4-dihydro-7,8-diamino-2H,6H-pyrimido[2,1-b][1,3]thiazin-6-one, which is a useful intermediate for their synthesis. This intermediate and the thiazole homologue were obtained directly by reaction of 5,6-diamino-2,3-dihydro-2-thioxo-4(lH)-pyrimidi-none with 1,3- or 1,2-dibromoalkane, respectively.     

Cobalt(II) and nickel(II) chloride complexes with some 2-(4′-Methyl-2′-pyridyl and 2′- or 8′-quinolyl)benz-X-azoles

Summary Complexes of general formula ML_mCl₂ · nH₂O, where M=cobalt(II) or nickel(II); L=2-(4-methyl, 2-pyridyl)-benzimidazole (mpbi), 2-(4-methyl, 2-pyridyl)benzothiazole (mpbt), 2-(4-methyl, 2-pyridyl)benzoxazole (mpbo), 2-(4-methyl, 2-quinolyl)benzoxazole (mqbo), or 2-(4-methyl, 8-quinolyl)benzoxazole (mqbo); m=1,2; n=0–3, were prepared and characterized by t.g.a., conductance and magnetic measurements, i.r. and diffuse-reflectance electronic spectra.All the ligands behave as bidentate and coordinate through the pyridine- and isoxazole-nitrogen atoms.The nickel complexes have distorted octahedral or fivecoordinate structures. The cobalt complexes arepseudo-tet- rahedral except Co(mpbo)₂Cl₂·2H₂O where the metal is six-coordinate.     

Novel P‐Stereogenic PCP Pincer‐Aryl Ruthenium(II) Complexes and Their Use in the Asymmetric Hydrogen Transfer Reaction of Acetophenone

Achiral P‐donor pincer‐aryl ruthenium complexes ([RuCl(PCP)(PPh₃)]) 4c , d were synthesized via transcyclometalation reactions by mixing equivalent amounts of [1,3‐phenylenebis(methylene)]bis[diisopropylphosphine] ( 2c ) or [1,3‐phenylenebis(methylene)]bis[diphenylphosphine] ( 2d ) and the N‐donor pincer‐aryl complex [RuCl{2,6‐(Me₂NCH₂)₂C₆H₃}(PPh₃)], ( 3 ; Scheme 2). The same synthetic procedure was successfully applied for the preparation of novel chiral P‐donor pincer‐aryl ruthenium complexes [RuCl(P*CP*)(PPh₃)] 4a , b by reacting P‐stereogenic pincer‐arenes (S,S)‐[1,3‐phenylenebis(methylene)]bis[(alkyl)(phenyl)phosphines] 2a , b (alkyl=ⁱPr or ^tBu, P*CHP*) and the complex [RuCl{2,6‐(Me₂NCH₂)₂C₆H₃}(PPh₃)], ( 3 ; Scheme 3). The crystal structures of achiral [RuCl(equation/tex2gif-sup-3.gifPCP)(PPh₃)] 4c and of chiral (S,S)‐[RuCl(equation/tex2gif-sup-6.gifPCP)(PPh₃)] 4a were determined by X‐ray diffraction (Fig. 3). Achiral [RuCl(PCP)(PPh₃)] complexes and chiral [RuCl(P*CP*)(PPh₃)] complexes were tested as catalyst in the H‐transfer reduction of acetophenone with propan‐2‐ol. With the chiral complexes, a modest enantioselectivity was obtained.     

Multimodal open-tubular capillary electrochromatographic analysis of amines and peptides

This study describes a comparison of different modes of open-tubular electrochromatography (OTCEC) in bare and etched capillaries. To carry out the investigation, the separation of impurities of two synthetic peptides and the separation of a mixture of five heterocyclic aromatic amines were studied. Three different types of stationary phase were evaluated: (i) fluorosurfactants (anionic and zwitterionic) adsorbed in the inner wall of the capillary (electrochromatography with dynamically modified stationary phases (DMS)CEC); (ii) physically adsorbed polymers (DMA-SO(3-) and DMA-N(+)(CH(3))(3)) and (iii) chemically modified capillaries (C(18), cholesteryl 10-undecanoate and diol). The results confirm that electrochromatography can be a viable alternative to capillary electrophoresis (CE) and liquid chromatography, more established separation techniques. It is possible to differentiate some minor species for the synthetic peptides that cannot be resolved by CE or high-performance liquid chromatography (HPLC). Moreover the separation of the amine mixture depends strongly on the stationary phase used.