Study on crystalline properties of Er-Si-O compounds in relation to Er-related 1.54 μm photoluminescence and electrical properties

Er-Si-O crystalline compounds, which exhibit superlattice structures and sharp and strong Er-related 1.54 μm photoluminescence (PL) spectra at room temperature have been formed by self-assembling growth mechanism. Oxidation of the starting materials which have Si and Er at an atomic ratio of 2:1 are prepared and then oxidation and succeeding high-temperature annealing in Ar above 1250 °C cause a self-assembled superlattice-structured Er-Si-O crystalline compounds. The control of the ratio of Si and Er, as well as the following oxidation and annealing processes, is found to be sensitive to the crystalline properties, PL spectra and electrical properties. In this study, Er-Si-O crystalline thin films are formed on Si substrates by sol-gel and MOMBE methods, and their crystalline properties such as crystalline orientation and concentration ratio of Er, Si and O are investigated. Crystalline Er-Si-O films of high orientation are successfully grown on Si(1 0 0) and its inclined surface. The PL and excitation spectra, fluorescence decay and the electrical properties are found to be strongly related to the crystalline properties. Excess O causes a broader 1.54 μm PL spectra, slower fluorescence decay, lower carrier-mediated excitation and higher resistivity. A precise control of O is found to be necessary to grow superlattice-structured Er-Si-O compounds, which are semiconducting and are excitable via carrier-mediated excitation mechanism.     

Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

Assembly of Carbohydrates on a Nickel(II) Center by Utilizing N-Glycosidic Bond Formation with Tris(2-aminoethyl)amine (tren). Syntheses and Characterization of [Ni{N-(aldosyl)-tren}(H(2)O)](2+), [Ni{N,N'-bis(aldosyl)-tren}](2+) and [Ni{N,N',N"-tris(aldosyl)-tren}](2+)

Reactions of [Ni(tren)(H(2)O)(2)]X(2) (tren = tris(2-aminoethyl)amine; X = Cl (1a), Br (1b); X(2) = SO(4) (1c)) with mannose-type aldoses, having a 2,3-cis configuration (D-mannose and L-rhamnose), afforded {bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine}nickel(II) complexes, [Ni(N,N'-(aldosyl)(2)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (2a), Br (2b), X(2) = SO(4) (2c); aldosyl = L-rhamnosyl, X(2) = SO(4) (3c)). The structure of 1c was confirmed by X-ray crystallography to be a mononuclear [Ni(II)N(4)O(2)] complex with the tren acting as a tetradentate ligand (1c.2H(2)O: orthorhombic, Pbca, a = 15.988(2) ?, b = 18.826(4) ?, c = 10.359(4) ?, V = 3118 ?(3), Z = 8, R = 0.047, and R(w) = 0.042). Complexes 2a,c and 3c were characterized by X-ray analyses to have a mononuclear octahedral Ni(II) structure ligated by a hexadentate N-glycoside ligand, bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine (2a.CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 16.005(3) ?, b = 20.095(4) ?, c = 8.361(1) ?, V = 2689 ?(3), Z = 4, R = 0.040, and R(w) = 0.027. 2c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.93(2) ?, b = 21.823(8) ?, c = 9.746(2) ?, V = 3176 ?(3), Z = 4, R = 0.075, and R(w) = 0.080. 3c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.560(4) ?, b = 21.694(5) ?, c = 9.786(2) ?, V = 3091 ?(3), Z = 4, R = 0.072, and R(w) = 0.079). The sugar part of the complex involves novel intramolecular sugar-sugar hydrogen bondings around the metal center. The similar reaction with D-glucose, D-glucosamine, and D-galactosamine, having a 2,3-trans configuration, resulted in the formation of a mono(sugar) complex, [Ni(N-(aldosyl)-tren)(H(2)O)(2)]Cl(2) (aldosyl = D-glucosyl (4b), 2-amino-2-deoxy-D-glucosyl (5a), and 2-amino-2-deoxy-D-galactosyl (5b)), instead of a bis(sugar) complex. The hydrogen bondings between the sugar moieties as observed in 2 and 3 should be responsible for the assembly of two sugar molecules on the metal center. Reactions of tris(N-aldosyl-2-aminoethyl)amine with nickel(II) salts gave the tris(sugar) complexes, [Ni(N,N',N"-(aldosyl)(3)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (6a), Br (6b); L-rhamnosyl, X = Cl (7a), Br (7b); D-glucosyl, X = Cl (9); maltosyl, X = Br (10); and melibiosyl, X = Br (11)), which were assumed to have a shuttle-type C(3) symmetrical structure with Delta helical configuration for D-type aldoses on the basis of circular dichroism and (13)C NMR spectra. When tris(N-rhamnosyl)-tren was reacted with NiSO(4).6H(2)O at low temperature, a labile neutral complex, [Ni(N,N',N"-(L-rhamnosyl)(3)-tren)(SO(4))] (8), was successfully isolated and characterized by X-ray crystallography, in which three sugar moieties are anchored only at the N atom of the C-1 position (8.3CH(3)OH.H(2)O: orthorhombic, P2(1)2(1)2(1), a = 16.035(4) ?, b = 16.670(7) ?, c = 15.38(1) ?, V = 4111 ?(3), Z = 4, R = 0.084, and R(w) = 0.068). Complex 8 could be regarded as an intermediate species toward the C(3) symmetrical tris(sugar) complexes 7, and in fact, it was readily transformed to 7b by an action of BaBr(2).     

Preparation of new nitrogen-bridged heterocycles. 56. Syntheses and reactions of 1-[2,2-bis(alkylthio)-1-(ethoxycarbonylacetyl)vinyl]pyridinium salts

The title compounds, readily available from the S-alkylation of pyridinium 1-[alkylthio(thiocarbonyl)](ethoxycarbonylacetyl)methylides with alkyl halides or alkyl bromoacetates, were treated with a base and then a dehydrogenating agent to provide some unique products such as 3-[bis(alkylthio)methylene]-2(3H)-indolizinones and dialkyl 7-methyl-4-oxo-1,4,8,8a-tetrahydro-1,4-thiazino[3,4,5-cd]indolizine-1,5-dicarboxylates. On the other hand, similar reaction of these pyridinium salts in the absence of the dehydrogenating agent afforded alkyl 2-hydroxyindlizine-3-carboxythiolates, whose yields were increased by adding trifluoroacetic acid to the reaction mixture. The structures of some products were confirmed by the X-ray analyses.     

Unequally spaced multiple mid-infrared wavelength generation using an engineered quasi-phase-matching device

We propose a novel quasi-phase-matched (QPM) device that can generate unequally spaced multiple wavelengths. Unequally spaced multiple QPM peaks can be obtained by employing the optimized phase modulation of a periodic domain structure. We fabricated a LiNbO3 waveguide device for 3.2-3.4 microm band difference frequency generation based on the design. Using the multiple mid-infrared outputs, we demonstrate the detection of multiple hydrocarbon gases, namely, methane, ethylene, and ethane.     

High‐Quality Three‐Dimensional Nanoporous Graphene

We report three‐dimensional (3D) nanoporous graphene with preserved 2D electronic properties, tunable pore sizes, and high electron mobility for electronic applications. The complex 3D network comprised of interconnected graphene retains a 2D coherent electron system of massless Dirac fermions. The transport properties of the nanoporous graphene show a semiconducting behavior and strong pore‐size dependence, together with unique angular independence. The free‐standing, large‐scale nanoporous graphene with 2D electronic properties and high electron mobility holds great promise for practical applications in 3D electronic devices.     

Selective Generation of Formamides through Photocatalytic CO2 Reduction Catalyzed by Ruthenium Carbonyl Compounds

The selective formation of dialkyl formamides through photochemical CO₂ reduction was developed as a means of utilizing CO₂ as a C₁ building block. Photochemical CO₂ reduction catalyzed by a [Ru(bpy)₂(CO)₂]²⁺ (bpy: 2,2′‐bipyridyl)/[Ru(bpy)₃]²⁺/Me₂NH/Me₂NH₂⁺ system in CH₃CN selectively produced dimethylformamide. In this process a ruthenium carbamoyl complex ([Ru(bpy)₂(CO)(CONMe₂)]⁺) formed by the nucleophilic attack of Me₂NH on [Ru(bpy)₂(CO)₂]²⁺ worked as the precursor to DMF. Thus Me₂NH acted as both the sacrificial electron donor and the substrate, while Me₂NH₂⁺ functioned as the proton source. Similar photochemical CO₂ reductions using R₂NH and R₂NH₂⁺ (R=Et, nPr, or nBu) also afforded the corresponding dialkyl formamides (R₂NCHO) together with HCOOH as a by‐product. The main product from the CO₂ reduction transitioned from R₂NCHO to HCOOH with increases in the alkyl chain length of the R₂NH. The selectivity between R₂NCHO and HCOOH was found to depend on the rate of [Ru(bpy)₂(CO)(CONR₂)]⁺ formation.     

Local crystal structure of nano-manganese-oxide gold adsorbent

The local crystal structure of dried and deuterated nano-manganese-oxide powder samples was studied via atomic pair distribution function analysis of X-ray and neutron powder diffraction data. The protonated sample shows ultrahigh efficiency as a gold adsorbent even from ppt-level aqueous solutions such as seawater. We show that the nano-manganese-oxide particles have an R-MnO₂-type local crystal structure. The possible role of the protons on the surface of the nano-particles is discussed.