Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger

Journal of Thermal Analysis and Calorimetry - In recent decades, the growth of heat transfer using nanomaterials in the conventional base fluid has caught the attention of researchers...     

The effect of rapid rotation on a vertical bridgman furnace at large Rayleigh number

In quasi-steady operation, convection currents in a Bridgmandevice, used for producing a semi-conductor crystal, createinhomogeneities that may make the crystal unusable. It has oftenbeen suggested that additional forces due to rotation or magnetismmight be efficacious in reducing the segregation of the elementsof the alloy. It has been found that, over a wide range of rotationrates, there is no improvement in performance due to rotationabout the vertical axis. However, numerical results that havebeen obtained previously (Lee & Pearlstein, J. Crys. Growth240, 2002) indicate that, when effects of centrifugal buoyancyare introduced, a substantial reduction in segregation is achieved.In the work reported here, by contrast, in which we extend previouslarge-Rayleigh-number asymptotic analysis to include centrifugalbuoyancy, we find no improvement in radial segregation, butrather increasing segregation with increasing rotation rate.     

Extension of multigrid methodology to supersonic/hypersonic 3-D viscous flows

A multigrid acceleration technique developed for solving the three-dimensional Navier–Stokes equations for subsonic/transonic flows has been extended to supersonic/hypersonic flows. An explicit multistage Runge–Kutta type of time-stepping scheme is used as the basic algorithm in conjunction with the multigrid scheme. Solutions have been obtained for a blunt conical frustum at Mach 6 to demonstrate the applicability of the multigrid scheme to high-speed flows. Computations have also been performed for a generic High-Speed Civil Transport configuration designed to cruise at Mach 3. These solutions demonstrate both the efficiency and accuracy of the present scheme for computing high-speed viscous flows over configurations of practical interest.     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

Controlled hydrothermal growth of ZnO nanostructures by sequestering the Zn metal ions with the chelating agent EDTA

In the present work, a controlled growth of ZnO nanostructures by manipulating Zn metal ion concentration by the chelating action of ethylene diaminetetra acetic acid in hydrothermal method is studied. EDTA produces metal–chelate complex by the formation of bidentate ligand with Zn²⁺ in the solution and diminishes the reactivity of Zn metal cations. Concentration of EDTA in the mother solution was varied in different ranges like 3, 5 and 10 mM while retaining the zinc metal salt and the NaOH concentration the same. Three different morphologies of wurtzite structured ZnO nanostructures such as nanorods-bunch, separate/discrete uniformly sized hexagonal nanorods and tapered flower petals like shapes are achieved by 3, 5 and 10 mM strengths of EDTA, respectively. The medium concentration 5 mM of EDTA is found to have moderate control over producing ZnO nanostructures of uniform diameter and a high aspect (length to diameter) ratio. An array of vertically aligned free standing ZnO nanorods with uniform spacing is successfully achieved by the addition of 5 mM of EDTA in the mother solution and the same is studied for its fluorescence property at an excitation of 325 nm and it has exhibited a characteristic UV emission of ZnO around 383 nm.     

Robust half-metallicity at the zincblende CrTe(0 0 1) surfaces and its interface with ZnTe(0 0 1)

All electron full potential calculations based on spin density functional theory are performed to study cubic zincblende (ZB) and hexagonal NiAs structures of bulk CrTe, free (0 0 1) surfaces of ZB CrTe, and interface of ZB CrTe with ZnTe(0 0 1). The ferromagnetic NiAs structure is reported to be about 0.26 eV more stable than the ferromagnetic ZB phase while ZB CrTe is found to be a half-metallic ferromagnet with a half-metallic gap of about 2.90 eV. Thermodynamic stability of CrTe(0 0 1) surfaces are studied in the framework of ab-initio thermodynamic. The obtained phase diagram evidences more stability of the Te terminated surface compared with the Cr termination. We discuss that both Te and Cr ideal terminations of CrTe(0 0 1) retain bulk-like half-metallic property but with a reduced half-metallic gap compared with bulk value. The structural, electronic, magnetic, and band alignment properties of the ZB CrTe/ZnTe(0 0 1) interface are computed and a rather large minority valence band offset of about 1.09 eV is observed in this heterojunction.     

Half-metallicity characteristic at zincblende CrSb(0 0 1) surfaces and its interfaces with GaSb(0 0 1) and InAs(0 0 1)

Electronic and magnetic properties of the zincblende CrSb(0 0 1) surfaces and its interfaces with GaSb(0 0 1) and InAs(0 0 1) semiconductors are studied within the framework of the density-functional theory using the FPLAPW+lo approach. We found that the Cr-terminated surfaces retain the half-metallic character, while the half-metallicity is destroyed for the Sb-terminated surfaces due to surface states, which originate from p electrons. The phase diagram obtained through the ab-initio atomistic thermodynamics shows that at phase transition has occurred. Also the half-metallicity character is preserved at both CrSb/GaSb and CrSb/InAs interfaces. The conduction band minimum (CBM) of CrSb in the minority spin case lies about 0.63 eV above that of InAs, suggesting that the majority spin can be injected into InAs without being flipped to the conduction bands of the minority spin. On the other hand the CrSb/GaSb interface has a greater valence band offset (VBO) compared with the CrSb/InAs interface and the minority electrons have lower contribution in the injected currents and hence more efficient spin injection into the GaSb semiconductor. Thus the CrSb/GaSb and CrSb/InAs heterojunctions can be useful in the field of spintronics.     

New ideas in neutrino detection

What is new in the field of neutrino detection? In addition to new projects probing both the low and high ends of the neutrino energy scale, an inexpensive, effective technique is being developed to allow tagging of antineutrinos in water Cherenkov (WC) detectors via the addition to water of a solute with a large neutron cross-section and energetic γ daughters. Gadolinium is an excellent candidate since in recent years it has become very inexpensive, now less than $8 per kilogram in the form of commercially available gadolinium trichloride. This non-toxic, non-reactive substance is highly soluble in water. Neutron capture on gadolinium yields an 8.0 MeV gamma cascade easily seen in detectors like Super-Kamiokande. The uses of GdCl₃ as a possible upgrade for the Super-Kamiokande detector — with a view toward improving its performance as an antineutrino detector for supernova neutrinos and reactor neutrinos — are discussed, as are the ongoing R&;D efforts which aim to make this dream a reality within the next two years.     

有机硅活性中间体的研究 II. 一些含环丙基的有机硅化合物的合成及其结构

用锂有机物的方法合成了四种含有环丙基有机硅化合物,对上述每种化合物中可能存在着的立体异构进行了分离和和构型测定。