Synthesis of polycyclic pyrazoles through formation of the first fused heterocyclic o-quinodimethane intermediate

1-Benzoyl-4,6-dibromo-3-methyl-1,4,5,6-tetrahydrocyclopenta[c]pyrazole (2) was used as a precursor for o-quinodimethane 3, which was trapped by in situ reactions with dienophiles to give bridged pyrazole derivatives.     

A flow-through microfluidic chip for continuous dielectrophoretic separation of viable and non-viable human T-cells

Effective methods for rapid sorting of cells according to their viability are critical in T cells based therapies to prevent any risk to patients. In this context, we present a novel microfluidic device that continuously separates viable and non-viable T-cells according to their dielectric properties. A dielectrophoresis (DEP) force is generated by an array of castellated microelectrodes embedded into a microfluidic channel with a single inlet and two outlets; cells subjected to positive DEP forces are drawn toward the electrodes array and leave from the top outlet, those subjected to negative DEP forces are repelled away from the electrodes and leave from the bottom outlet. Computational fluid dynamics is used to predict the device separation efficacy, according to the applied alternative current (AC) frequency, at which the cells move from/to a negative/positive DEP region and the ionic strength of the suspension medium. The model is used to support the design of the operational conditions, confirming a separation efficiency, in terms of purity, of 96% under an applied AC frequency of 1.5 × 10⁶ Hz and a flow rate of 20 μl/h. This work represents the first example of effective continuous sorting of viable and non-viable human T-cells in a single-inlet microfluidic chip, paving the way for lab-on-a-chip applications at the point of need.     

Dynamical disorder of spin-induced Jahn-Teller orbitals with the insulator-metal transition in cobaltites

Using elastic and inelastic neutron scattering, we investigated the evolution of the local atomic structure and lattice dynamics of La(1-x)SrxCoO3 (x=0-0.5) as it crosses over with x from an insulator to a ferromagnetic metal (FMM). Our pair density function analysis indicates that, in the paramagnetic insulating phase for all x, spin activation of Co3+ ions induces local static Jahn-Teller (JT) distortions. The size of the JT lattice increases almost linearly with x. However, in the FMM phase, static JT distortions are absent for x< or =30%. This coincides with narrowing of variant Planck's constant over 2 pi omega=22 and 24 meV modes in the phonon spectrum which we argue is due to localized dynamical JT fluctuations. For x>30%, static JT distortions reappear along with broadening of the phonon modes because of weakened charge-lattice interactions.     

In search for mixed transition metal/lanthanide single-molecule magnets: Synthetic routes to NiII/TbIII and NiII/DyIII clusters featuring a 2-pyridyl oximate ligand

Employing the mononuclear complex [Ni{(py)C(Me)NO}₂{(py)C(Me)NOH}] (1) as ‘ligand’ [(py)C(Me)NOH = methyl 2-pyridyl ketone oxime], the use of the ‘metal complexes as ligands’ approach has led to the synthesis of the mixed Ni^II/Ln^III complexes [NiTb{(py)C(Me)NO}₂(NO₃)₃{(py)C(Me)NOH}] (2), [Ni₂Ln₂{(py)C(Me)NO}₆(NO₃)₄] (Ln = Dy, 3; Ln = Tb, 4) and [Ni₂Tb{(py)C(Me)NO}₆](NO₃) (5). The structures of 2, 3, and 5, and the magnetic properties of 2 and 5 are briefly discussed.     

Possible link of a structurally driven spin flip transition and the insulator-metal transition in the perovskite La(1-x)Ba(x)CoO3

The nature of the magnetic ground state near the insulator-metal transition (IMT) in La(1-x)Ba(x)CoO3 was investigated via neutron scattering. Below the critical concentration, x(c)～0.22, a commensurate antiferromagnetic (AFM) phase appears initially. Upon approaching x(c), the AFM component weakens and a ferromagnetic (FM) ordered phase sets in while in the rhombohedral lattice. At x(c), a spin flip to a new FM structure occurs at the same time as the crystal symmetry transforms to orthorhombic (Pnma). The Pnma phase may be the driving force for the IMT.     

Pesticide residues analysis in honey using ethyl acetate extraction method: validation and pilot survey in real samples

This paper presents a cost-effective and validated multi residue confirmatory method for the determination of 167 chemically different pesticides and a survey study on Cyprus honey samples. This method uses ethyl acetate for the extraction of pesticides from honey and the determination is performed with liquid chromatography (LC) coupled to mass spectrometry (MS) operating in tandem mode (MS/MS) and with GC–ECD (gas chromatography with electron capture detector) analysis. The LC-MS/MS analytical system is especially important in the analysis of polar and non-volatile pesticides. For the validation of the method, blank honey samples were spiked with 146 pesticides (organophosphorous, carbamates, triazoles, amides, neonicodinoids, strobilurines, phenylureas, bendimidazoles and others) for the LC-MS/MS analysis at three levels: 0.01, 0.05 and 0.1 mg kg^?1 and with 21 pesticides for the GC-ECD analysis at two levels: 0.01 and 0.05 mg kg^?1for organochlorines and 0.05 and 0.2 mg kg^?1for the pyrethroids. As blank sample, a sample of honey which did not contain detectable levels of the analytes sought was used. The validation study was in accordance to the DG SANCO guidelines. The scope of validation included recovery, linearity, limits of quantification and precision. Linearity is demonstrated all along the range of concentration that was investigated with correlation coefficients ≥0.98. Recoveries of the majority of compounds were in the 70%–120% range and were characterised by precision lower or equal to 20%. The validated method was used for a survey of 36 samples of honey produced in different areas of Cyprus and this is the first work on Cypriot honey samples investigating a broad range of pesticides. Only coumaphos was detected at concentrations higher than 0.01 mg kg^?1 in the 58.6% of the honey samples analysed for Coumaphos. The results were evaluated in accordance to the provisions of the Commission Regulation (EU) No 37/2010 on pharmacologically active substances and their classification regarding maximum residue limits (MRLs) in foodstuffs of animal origin. The concentrations of coumaphos in all positive samples were at levels much lower than the MRL.     

UV-A induced oxidative stress is more prominent in naturally pigmented aged human RPE cells compared to non-pigmented human RPE cells independent of zinc treatment

To investigate the effects of zinc supplementation on human amelanotic (ARPE-19) and native pigmented retinal pigment epithelial cells (hRPE) under normal light conditions and after ultraviolet A light exposure. hRPE cells, containing both melanin and lipofuscin granules, were prepared from human donor eyes of 60-70 year old patients. Cells of the amelanotic ARPE-19 cell line and pigmented hRPE cells were treated with zinc chloride and subjected to oxidative stress by UV-A irradiation. Intracellular H(2)O(2) formation was measured using a fluorescence oxidation assay. Additionally, apoptosis and viability assays were performed. Control cells were treated identically except for irradiation and zinc supplementation. Under normal light conditions, zinc treated hRPE cells produced less H(2)O(2) than unsupplemented hRPE cells. Viability and apoptosis events did not change. After UV-A irradiation, ARPE and hRPE cells were greatly impaired in all tests performed compared to the non-irradiated controls. No differences were found after zinc supplementation. hRPE cells showed a higher apoptosis and mortality rate than non-pigmented cells when stressed by UV-A light. ARPE cells never showed any zinc related effects. In contrast, without irradiation, zinc supplementation reduced H(2)O(2) production in pigmented hRPE cells slightly. We did not find any zinc effect in irradiated hRPE cells. After UV light exposure, pigmented cells showed a higher apoptosis and mortality than cells lacking any pigmentation. We conclude that cells with pigmentation consisting of melanin and lipofuscin granules have more prooxidative than antioxidative capacity when stressed by UV light exposure compared to cells lacking any pigmentation.     

DFT and experimental investigation of catecholate derivatives of benzoic acid and pyridine

DFT calculations, at the B3LYP/TZVP level of theory for pyrocatechuic acid (2,3-dihydroxybenzoic acid, 2,3-DHBA), 2,3-dihydroxy-pyridine 2,3-DHPY and their ionized and oxidized forms, have been performed, in combination with experimental data. ¹H, ¹³C, 2D COSY NMR, IR and electronic spectra were coupled to the theoretical calculations. The geometrical parameters were checked by reported crystallographic data. The neutral form of pyrocatechuic acid is the most stable, regarding its ionized (mono-, di- or tri-anions) and oxidized ([2,3-DHBA-sqH]⁻, [2,3-DHBA-sq]²⁻, [2,3-DHBA-q]⁻) species. The most stable conformer 2,3-DHBA-H₃ displays the COOH– group co-planar to the catechol ring, hydrogen bonded with OH(2). In the [2,3-DHBA-H₂]⁻ the stable conformer shows the presence of protonated COOH, while OH(2) is ionized. The tri-anion is the form of 2,3-DHBA with the highest energy. Among the protonated semiquinone radical forms [2,3-DHBA-sqH]⁻, more stable is the OH(3)-oxidized, cited 21.3 kcal/mol lower in energy from the OH(2)-oxidized; in this latter the COO⁻ group lies perpendicular to the benzene ring. The same calculation procedure fitted on the oxygenated [2,3-DHBA-H-O₂]²⁻ shows a weak π-bonding between O(2) and dioxygen, strongly H–bonded to OH(3), while the C(2)–O bond order increases. The different way of 2,3-DHBA oxidation parallels the different, from 3,4-isomer, degradation products. Our DFT calculations show that the keto/enol tautomeric forms of the neutral 2,3-DHPY-H₂ differ by 5.02 kcal/mol. Both species give, upon ionization, the [2,3-DHPY-H]⁻ with the OH(2) deprotonated. The electronic density distribution of [2,3-DHPY-q] justifies further reactions (degradation or dienic addition) as experimentally observed.