Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.     

Fe2O3/YSZ-γ-Al2O3催化剂在甲烷催化燃烧中的催化性能研究

以Fe2O3为活性组分，γ-Al2O3，ZrO2-γ—Al2O3及YSZ—γ—Al2O3(YSZ是用Y2O3稳定ZrO2的催化剂载体)为载体，制备了3种甲烷燃烧催化剂．其中以YSZ—γ—Al2O3为载体的催化剂催化性能最好．XPS检测发现．ZrO2和Y2O3的存在可以增加和稳定Fe2O3的表面浓度，同时也可减弱Fe2O3与γ—Al2O3之间的相互作用．Fe2O3质量分数为10％的Fe2O3／YSZ—γ—Al2O3催化剂具有最佳的催化活性．XRD测试结果表明．该催化剂的活性与Fe2O3在载体上的分散状况有关．     

2,2′-(1,2-亚苯基二氧)二(N-苯基乙酰胺)及其稀土配合物的合成、表征与荧光性质

合成了一种新的芳香族酰胺配体2，2’-（1，2-亚苯基二氧）二（N-苯基乙酰胺）及其稀土（La，Eu，Tb，Dy，Sm，Gd）硝酸盐配合物，通过核磁共振谱、元素分析、摩尔电导、红外光谱、差热等测试技术对其进行了结构表征。结果表明，稀土配合物的可能结构为：[REL（NO3）3]·H2O（RE：La^3＋、Sm^3＋、Eu^3＋、Gd^3＋、Tb^3＋、Dy^3＋）．配合物产率约为78％。在稀土配合物中，作为抗衡阴离子的3个硝酸根均以双齿的配位方式与稀土配位，稀土配位数为10，并且还有1个结晶水。在298K下对配合物[EuL（NO3）3]·H2O和[TI）L（N03）3]·H2O的固体荧光性质进行了研究。结果发现，它们分别发射Eu^3＋和Tb^3＋稀土离子的特征荧光，且配合物[TbL（NO3）3]·H2O的荧光比[EuL（NO3）3]·H2O的荧光强。说明此芳香族酰胺配体敏论Tb^3＋发光比敏化Eu^3＋发光程度大。     

Synthesis and Crystal Structure of (2S,2'S,4'R)-2-(1-Hydroxy-1-ethylpropyl)-1-[(1'-p-tosyl-4'-hydroxypyrrolidin-2'-yl)methyl]pyrrolidine

1 INTRODUCTION In recent years, chiral β-amino alcohols have attracted much attention due to their special bio- logical functions and catalytic activities. Chiral β- amino alcohol moieties are usually found not only in natural products (e.g., cinchona alkaloids, ephe- drine, toxal, etc.) with special biological activities[1, 2], but also critical structural segments of some syn- thesized biologically active compounds, such as adrenergic agonists or antagolist[3, 4] and inhibitors for HI…     

A new oxamato-bridged heterotrinuclear NiCuNi complex with irregular spin state structure: Synthesis, spectroscopy, crystal structure and magnetism

A new oxamato-bridged Ni^IICu^IINi^II species, [Ni(tacn)(H₂O)]₂[μ-Cu(pba)](ClO₄)₂·6H₂O 1, (tacn=1,4,7-triazacyclononane; pba=1,3-propylenebis(oxamato)) has been synthesized and structurally as well as magnetically characterized. Complex 1 has a discrete trinuclear Ni^IICu^IINi^II structure: Two nickel(II) ions are bridged by [Cu(pba)]²⁻ anion, macrocyclic ligand tacn works as terminal ligand of the nickel(II) center. The magnetic data of compound 1 was analyzed by means of

leading to g_Cu=2.19, g_Ni=2.18, J=−112.8 cm⁻¹, D=±4.31 cm⁻¹. The parameters are compared with the similar complexes and the irregular spin state structure of complex 1 is also described here.     

Synthesis,structures and properties of two novel copper(II) complexes with hydrogen bonding supramolecular networks

Two novel complexes, [Cu(HL)₂(H₂O)]₂(OH)₂(ClO₄)₂·1.5H₂O (1) and [Cu(HL)₂]Cl₂·4H₂O (2), have been prepared by reacting copper salts with the 4-amino-3-ethyl-1,2,4-triazole-5-thione (HL) ligand in neutral solution and in HCl (6 mol L^–1) medium, respectively. They were characterized by FT-IR and u.v.–vis. spectra, and the structures were determined by single crystal X-ray diffraction techniques. In both complexes, the triazole ligand chelated the metal ions through the amine and thione substituents on the five-membered ring. Complex (1) has a square-pyramidal copper(II) ion coordinated by two triazole ligands and one water molecule. Unlike (1), the Cu²⁺ ion in (2) displays its characteristic Jahn–Teller distortion with the distance of the Cl^– anions to metal ion further away than that of the triazole ligands. The most intriguing structural features of the title complexes are that the HL ligands chelate copper(II) ions through the N(1) and S(1) atoms, in a cis mode in (1) and a trans mode in (2). In both cases, self-assembled crystals, by supramolecular contacts simultaneously, form two multi-dimensional frameworks.     

Construction of the Pharmacophore Model of Glycogen Synthase Kinase-3 Inhibitors

A three dimensional pharmacophore model has been generated for glycogen synthase kinase-3 （GSK-3） inhibitots. A dataset consisting of 89 compounds was selected on the basis of the information content of the structures and activity data as required by the CATALYST system. The optimum model with four features （one hydrogen-bond acceptor unit, one ring aromatic unit, and two hydrophobic aromatic units） was selected with a good correlation coefficient （0.95）. This model is able to predict the activity of other known GSK-3 inhibitors not included in the model generation, and can be further used to identify structurally diverse compounds with desired biological activity by virtual screening.     

Metal-Free,Visible-Light-Induced Selective C−C Bond Cleavage of Cycloalkanones with Molecular Oxygen

A metal-free, visible-light-induced oxidative C−C bond cleavage of cycloketones with molecular oxygen is described. Cooperative Brønsted-acid catalysis and photocatalysis enabled selective C−C bond cleavage of cycloketones to generate an array of γ-, δ- and ϵ-keto esters under very mild conditions. Mechanistic studies indicate that singlet molecular oxygen (¹O₂) is responsible for this transformation.