Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

Heteroconjugation-based capillary electrophoretic separation of phenolic compounds in acetonitrile and propylene carbonate

A mixture of methyl- and hydroxy-substituted phenols was separated by capillary electrophoresis in pure acetonitrile and propylene carbonate. Interactions between undissociated phenolic compounds and the background electrolytes were investigated. In the present work, benzyltriethylammonium chloride, tetrabutylammonium acetate, and two room temperature-molten salts, 1-butyl-3-methyl imidazolium trifluoroacetate and 1-butyl-3-methyl imidazolium heptafluorobutanoate, were used as background electrolytes. The formation of a negative complex between background electrolyte anion and neutral phenolic compound was observed and the formation constant calculated. The formation constants for anion-analyte complexes were approximately the same in propylene carbonate and in acetonitrile. In both solvents the formation constants were the highest for acetate and the lowest for trifluoroacetate. The separation of analytes was slightly influenced by the nature of the solvent: in acetonitrile the resolution between peaks was higher for 1,3-dihydroxyphenol and 1,3,5-trihydroxyphenol, in propylene carbonate 3-methylphenol and phenol were better separated. It was demonstrated that traces of water influence the mobilities of anion-phenol complexes in propylene carbonate.     

Separation of polyphenolic compounds extracted from plant matrices using capillary electrophoresis

Phenolic compounds constitute a large group of secondary plant products whose chemical structure may range from quite simple compounds to highly polymerized substances. The polyphenols content have been investigated in the alcoholic extract of the fruits of three different plants: sweet gale, sea buckthorn, hiprose. The trans-resveratrol content we have studied in roots, stems, leaves and flowers of Japanese knotweed grown in Estonia. Plant material was pre-treated in two different ways: by infusing with methanol and by supercritical fluid extraction with carbon dioxide modified with different alcohols. The relationship between variables (pressure, temperature, modifier amount) and yields are examined. The capillary zone electrophoresis methods were developed for the separation of polyphenolic anti-oxidative compounds. Using both water based borate buffer and acetonitrile based non-aqueous media it was possible to get reliable separation of several polyphenolic compounds. Based on that there has been identified such as flavone, trans-resveratrol, catechin, chlorogenic acid, quercetin and myricetin in plant extracts. Changes in the relative concentrations of trans-resveratrol in different parts of the knotweed have been established.     

E.p.r. spectra and bonding parameters of copper(ii) complexes of 2-methyl-4,6-diacylphenols,of the dibenzoyl analogues and of some of their derivatives

Summary The e.p.r. spectra of mononuclear copper(II) complexes of 2-methyl-4,6-diacylphenols and dibenzoylphenols, and their condensation products with 1,3-diaminopropane have been examined. The MO coefficients evaluated from e.p.r. spectral parameters indicate that the in-plane-, in-plane- and out-of-plane- bondings are significantly covalent. The e.p.r. spectra of the macrocyclic dicopper(II) complexes derived from 2-methyl-4,6-diacyl(benzoyl)phenols and 1,3-diaminopropane measured at 77 K reveal the presence of mononuclear species of axial symmetry.     

One Way Traffic: Base-to-Backbone Hole Transfer in Nucleoside Phosphorodithioate

The directionality of the hole-transfer processes between DNA backbone and base was investigated by using phosphorodithioate [P(S⁻)=S] components. ESR spectroscopy in homogeneous frozen aqueous solutions and pulse radiolysis in aqueous solution at ambient temperature confirmed initial formation of G^.+-P(S⁻)=S. The ionization potential of G-P(S⁻)=S was calculated to be slightly lower than that of guanine in 5′-dGMP. Subsequent thermally activated hole transfer from G^.+ to P(S⁻)=S led to dithiyl radical (P-2S^.) formation on the μs timescale. In parallel, ESR spectroscopy, pulse radiolysis, and density functional theory (DFT) calculations confirmed P-2S^. formation in an abasic phosphorodithioate model compound. ESR investigations at low temperatures and higher G-P(S⁻)=S concentrations showed a bimolecular conversion of P-2S^. to the σ²-σ*¹-bonded dimer anion radical [-P-2S 2S-P-]⁻ [ΔG (150 K, DFT)=−7.2 kcal mol⁻¹]. However, [-P-2S 2S-P-]⁻ formation was not observed by pulse radiolysis [ΔG° (298 K, DFT)=−1.4 kcal mol⁻¹]. Neither P-2S^. nor [-P-2S 2S-P-]⁻ oxidized guanine base; only base-to-backbone hole transfer occurs in phosphorodithioate.     

Analysis of electron energy distribution function in a magnetically filtered complex plasma

The electron energy distribution function (EEDF) for a magnetically filtered dusty plasma is studied in a dusty double plasma device where the electron energy can be varied from 0.15 eV to ～ 2.8 eV and plasma density from 10 6 cm-3 to 10 9cm-3 . The characteristics of EEDF for these ranges of plasma parameters are investigated in a pristine plasma as well as in a dusty plasma. The results show that in the presence of dust, there is a drastic modification in EEDF patterns in a plasma with higher electron temperature and density than those in a low temperature and low density plasma produced by the magnetic filter.     

Polycrystalline silicon films prepared by metal-induced crystallisation using pre- and post-deposited aluminium on amorphous silicon

We report on the successful fabrication of polycrystalline silicon films by aluminium-induced crystallisation (AIC) of Radio frequency (rf) plasma-enhanced chemical vapour deposited (PECVD) a-Si films. The effects of annealing at different temperatures (300 and 400°C), below the eutectic temperature of the Si–Al binary system, on the crystallisation process have been studied. This work emphasises the important role of the position of the Al layer with respect to the Si layer on the crystallisation process. The properties of the crystallised films were characterised using X-ray diffraction, Raman spectroscopy, ellipsometry, field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). With an increase in the annealing temperature, it was found that the degree of crystallisation of annealed a-Si/Al and Al/a-Si films increased. The results showed that the arrangement where the Al was on top of the a-Si had a more prominent effect on crystallisation enhancement than when Al was below the a-Si. The interfacial layer between the Al and a-Si film is crucial because it influences the layer-exchange process during annealing. The oxide layer formed between the Al and the a-Si layers greatly retards the crystallisation process in the case of the Al/Si arrangement. Our investigations suggest that polycrystalline Si films formed by AIC can be used as a seed layer in solar cell fabrication.     

Nonlinear ion-acoustic solitary waves in an electron-positron-ion plasma with relativistic positron beam

The propagation characteristics of nonlinear ion–acoustic(IA) solitary waves(SWs) are studied in thermal electron–positron–ion plasma considering the effect of relativistic positron beam. Starting from a set of fluid equations and using the reductive perturbation technique, we derive a Korteweg–de Vries(KdV) equation which governs the evolution of weakly nonlinear IA SWs in relativistic beam driven plasmas. The properties of the IA soliton are studied, and it is shown that the presence of relativistic positron beam significantly modifies the characteristics of IA solitons.     

Exploring anionic emission of 2-benzoyl benzimidazole in micellar environments

In this paper, an interesting transformation of the emission of anionic conformer of 2-benzoyl bezimidazole in ionic and non-ionic micelles is reported. Deprotonation is hindered in cationic and non-ionic micelles owing to probe molecule's passage deep inside positive ion-rich Stern-layer in contrast with anionic micelle. The orientation of probe molecule in the two ionic micelles, as determined from the spectral properties is opposite in nature. Micellar environment shields the formation of mono- and di-cationic species at very low pH. Three decay times of the probe in different time domains were attributed to three possible anionic species and they are modified differently in ionic and neutral micelles. Quantum chemical calculations also predict the existence of three different possible anionic species.     

Adsorption and decomposition of cyclohexanone (C6H10O) on Pt(111) and the (2 × 2) and (√3 × √3)r30°-Sn/Pt(111) surface alloys

Adsorption and decomposition of cyclohexanone (C(6)H(10)O) on Pt(111) and on two ordered Pt-Sn surface alloys, (2 × 2)-Sn/Pt(111) and (√3 × √3)R30°-Sn/Pt(111), formed by vapor deposition of Sn on the Pt(111) single crystal surface were studied with TPD, HREELS, AES, LEED, and DFT calculations with vibrational analyses. Saturation coverage of C(6)H(10)O was found to be 0.25 ML, independent of the Sn surface concentration. The Pt(111) surface was reactive toward cyclohexanone, with the adsorption in the monolayer being about 70% irreversible. C(6)H(10)O decomposed to yield CO, H(2)O, H(2), and CH(4). Some C-O bond breaking occurred, yielding H(2)O and leaving some carbon on the surface after TPD. HREELS data showed that cyclohexanone decomposition in the monolayer began by 200 K. Intermediates from cyclohexanone decomposition were also relatively unstable on Pt(111), since coadsorbed CO and H were formed below 250 K. Surface Sn allowed for some cyclohexanone to adsorb reversibly. C(6)H(10)O dissociated on the (2 × 2) surface to form CO and H(2)O at low coverages, and methane and H(2) in smaller amounts than on Pt(111). Adsorption of cyclohexanone on (√3 × √3)R30°-Sn/Pt(111) at 90 K was mostly reversible. DFT calculations suggest that C(6)H(10)O adsorbs on Pt(111) in two configurations: by bonding weakly through oxygen to an atop Pt site and more strongly through simultaneously oxygen and carbon of the carbonyl to a bridged Pt-Pt site. In contrast, on alloy surfaces, C(6)H(10)O bonds preferentially to Sn. The presence of Sn, furthermore, is predicted to make the formation of the strongly bound C(6)H(10)O species bonding through O and C, which is a likely decomposition precursor, thermodynamically unfavorable. Alloying with Sn, thus, is shown to moderate adsorptive and reactive activity of Pt(111).