Comparison of stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry in application to supersonic jet spectrometry

Summary A supersonic jet spectrum of 9,10-dichloroanthracene is measured by stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry. The performance obtained is compared for these spectrometric methods, providing same information concerned with the energy level of the ground state. The former is more preferential for measurement of a high-resolution spectrum, since the spectral resolution is determined by the linewidth of the dumping laser. On the other hand, the latter is more preferential for measurement with better sensitivity at the expense of the spectral resolution, since the fluorescence throughput can be improved by increasing the slit width of the monochromator.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Mycosamine orientation of amphotericin B controlling interaction with ergosterol: sterol-dependent activity of conformation-restricted derivatives with an amino-carbonyl bridge

Amphotericin B (AmB 1) is known to assemble together and form an ion channel across biomembranes. The antibiotic consists of mycosamine and macrolactone moieties, whose relative geometry is speculated to be determinant for the drug's channel activity and sterol selectivity. To better understand the relationship between the amino-sugar orientation and drug's activity, we prepared conformation-restricted derivatives 2-4, in which the amino and carboxyl groups were bridged together with various lengths of alkyl chains. K+ influx assays across the lipid-bilayer membrane revealed that ergosterol selectivity was markedly different among derivatives; short-bridged derivative 2 almost lost the selectivity, while 3 showed higher ergosterol preference than AmB itself. Monte Carlo conformational analysis of 2-4 based on NOE-derived distances indicated that the amino-sugar moiety of 2 comes close to C41 because of the short bridge, whereas those of 3 and 4 are pointing outward. The mutual orientation of the amino-sugar moiety and macrolide ring is so rigid in derivatives 2 and 3 that these conformations should be unchanged upon complex formation in lipid membranes. These results strongly suggest that the large difference in sterol preference between derivatives 2 and 3 is ascribed to the different orientation of amino-sugar moieties. These findings allowed us to propose a simple model accounting for AmB-sterol interactions, in which hydrogen bonding between 2'-OH of AmB and 3beta-OH of ergosterol plays an important role.     

Effects of solvent in photo-induced graft copolymerization of vinyl monomers on cellulose

The effects of swelling of the sample and polymerization solvents were studied for photo-induced graft copolymerization of vinyl monomers on cellulose. The graft copolymerization of methyl methacrylate (MMA) was activated by swelling of the sample or organic solvent-water solutions within a certain range of their concentrations. Though each organic solvent gave a maximum in per cent grafting and the number of grafts at about 25 vol-% concentration, the initiation reaction scarcely took place at 100% concentration; thus, the solvent itself is considered to have a negative effect. The solvents used in the experiments were all hydrophilic, such as methanol, acetone, and dioxane. The average molecular weight of the grafted PMMA differed in each solvent, indicating a different characteristic effect of solvent on the growing grafted polymer radicals. The presence of ferric ion as a sensitizer stimulated further the contributions of the sample swelling and the organic solvents to the copolymerization reaction. A similar effect was observed for styrene as for MMA, but not for acrylic acid and methacrylic acid.     

The Electronic Structure of Azuleno[1,2,3-cd]phenalene and Azuleno[5,6,7-cd]phenalene,a Comparison

The photoelectron (PE.) spectra of azuleno[l, 2, 3-cd]phenalene ( 1 ) and azuleno- [5,6,7-cd]phenalene( 2 ) have been recorded. The first five bands of both compounds could be assigned to transitions corresponding to removal of electrons from 4a₂, 6b₁, 5b₁, 3a₂ and 4b_l orbitals. This assignment is based mainly on a comparison between the observed ionization potentials and orbital energies calculated in a HMO and a PPP model. The UV./VIS. polarized absorption spectrum of 1 in the region 10000–45000 cm^?1 has been measured by means of the stretched film technique. The measurements were performed in polyethylene sheets at 77°K. Several bands could be assigned to π* ← π transitions calculated by a PPP-CI method. A comparison between the electronic structures of 1 and 2 is made by means of a simple HMO diagram.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.     

Lattice dynamics of calcium oxide

The effect of the electronic extension on the electrostatic potential was first taken into account functionally by Birman. We have applied his model to the lattice dynamics of CaO, where the degree of the electronic extension w was defined and determined with the use of the electronic charge density distribution obtained from analysis of X-ray data. Our treatment shown here not only gives a physically meaningful model including the feature of the electronic extension, but also involves essentially the same very simple process as the conventional point-charge model but with fewer adjustable parameters. Good reproduction of calculated phonon dispersion curves was obtained by taking into account the electronic extension, although the degree of the electronic extension, w, used to fit the curve was a little larger than that derived from the observed data owing to the first rough approximation for the potential energy arising from the electronic extension.     

Real time addition or subtraction of two images by vector wave interferometry

The present article reports a new optical method for real time addition or subtraction of two photographic images. Two transparencies which are placed in the two arms of a Mach-Zehnder interferometer with two orthogonal polarizers are subsequently added or subtracted by rotating an analyser inserted in the output beam. A linear combination of the amplitudes of the two images can also be observed for different orientations of the transmission axis of the analyser. Some experimental results are presented.     

Optimum design of a distributed Bragg-reflector laser with optical loss in the corrugated waveguide

The distributed Bragg-reflector (DBR) laser with optical loss in the corrugated waveguide is analyzed by using the coupling mode theory. The threshold gain and the mode selectivity are given as a function of the optical loss, the coupling coefficient and the pumped length. These results show that the DBR laser has an optimum condition by considering the threshold gain and the mode selectivity.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.     

An evaluation method for measuring SPL and mode shape of tire cavity resonance by using multi-microphone system

This paper presents an evaluation method for measuring the sound pressure level and mode shapes of tire cavity resonance by using a multi-microphone system. Two commercial tires were evaluated to compare abilities of noise suppression by means of this method in the range of the first resonance from 200 to 260 Hz. One tire was a special tire that suppresses tire cavity resonance with polyurethane foam mounted on the tire’s inner liner. The other tire was a normal tire with no polyurethane foam. The mode shape change from vertical to horizontal direction in both tires. However, the sound pressure level of the special tire was lower than the normal tire at all frequencies.